380ml injectable vinylester chemical anchor | Sold in 40 Countries Injectable Chemical Anchors Manufacturer Since 1997 | Good Use

GU-2000 380ml Vinyl ester styrene free, the high bonded injection mortar for fast curing in tropical environments / Injectable chemical anchor factory establishes in Taiwan. With 25 years experience in producing injection mortar and export to over 40 countries.

380ml injectable vinylester chemical anchor - GU-2000 380ml Vinyl ester styrene free, the high bonded injection mortar for fast curing in tropical environments
  • 380ml injectable vinylester chemical anchor - GU-2000 380ml Vinyl ester styrene free, the high bonded injection mortar for fast curing in tropical environments

380ml injectable vinylester chemical anchor

GU-2000 380ml

Hollow block anchor sleeve chemical resin

380ml fast hardening vinylester chemical anchor is good for hollow brick fixing with anchor sleeve. It is also called 400ml or 410ml cartridge in the market. It required specific dispenser to go with the coaxial cartridge.

A two-component 10:1 resin chemical anchoring injection system. Convenient setting and fast curing in low temperature. It is environmentally friendly item without styrene. All of our products had tested and approved in Germany according to EAD 330499-00-0601. There are also 150ml, 235ml, 345ml and 360ml for diverse market preference.

Chemical fixing system - Fast curing viny lester chemical anchor

The obvious characteristic of vinylester hybrid mortar is fast curing to save installation time and hardening time. We develop diverse curing time to meet different country weather and installation temperature. Fast curing formula is not suitable for nonstandard high temperature which caused curing time accelerated. Please check technical data sheet for safety installation.

Specification Of Vinylester Chemical Anchor

● Material: Vinylester Styrene Free
● Model Number: GU-2000
● Capacity: 380ml
● Mixing Ratio: 10:1
● Mixed Color: Gray
● Shelf Life: 18 months
● Standard Package: One cartridge with one mixer
● Other Accessory: Mixer, caulking gun, nylon sleeve, air pump, brush

Vinylester Chemical Anchor Is Suitable For Installation On Vertical Wall

● Fast curing time with high reactivity
● Styrene free and low VOC
● Good acid and alkali resistance
● Long shelf life
● Use with 380ml applicator gun
● ECO friendly building material

Vinylester injection glue anchor with great resistance to industrial chemicals

380ml vinylester injection chemical anchor is packed in 2 component coaxial cartridge. Resin and hardener are stored in two separate chambers and are not mixed and activated until extrusion through the static mixer. The injection cartridges are quick and easy to use with the Good Use's dispensers. Partially used cartridges can be reused by simply changing the static mixer. GU-2000 Vinylester chemical grout provides very good resistance to acid and alkali and is suitable for installations at chemical industrial sites.

How to install chemical anchor?

1. Drill the specific diameter and depth. 2. Clean dust with brush and air blow pump. 3. Press out unmixed mortar which cannot be used. 4. Inject mixed mortar from the bottom of the drilled hole. 5. Insert and rotate the rebar/threaded rod/steel strip into the drilled hole. Don't touch the insert until full curing. Curing time refer to our TDS. The installation process will affect the bonding performance of chemical anchors.

All Good Use chemical anchors qualified by IWB lab in Germany and CSTB lab in France

There is no authorized lab for testing bonding anchor in Asia under European Technical Assessment (ETA) regulations. All our chemical anchors are tested according to EAD 330087-01-6001 and EAD 330499-00-0601 for fastener of rebar and threaded rods. We cooperate and consult with leading experts in Europe who dedicate in the fasteners field for more than two decades. We keep improving our research capacity and upgrade international approvals of chemical anchor.

Technical Data

CHART 1. SOLID SUBSTRATE REBAR INSTALLATION DETAILS

PressureDestroy Haul Strength
(Kgf/KN)
Safety Haul Strength
(Kgf/KN)
Working Standard
(mm)
Concrete Strength4,000 psi280 kg/cm24,000 psi280 kg/cm2Hole DiameterHole Depth
Rebar No.#3(Φ10)3,54035.81,18011.91390
#4(Φ13)5,49055.41,82718.516120
#5(Φ16)9,06091.53,02030.520145
#6(Φ19)14,150142.94,71747.625170
#7(Φ22)18,630188.26,21062.728200
#8(Φ25)23,195234.37,73278.132225
#9(Φ29)25,340256.08,44785.337250
#10(Φ32)32,120324.410,707108.140290
Remarks:1. Concrete Strength fc': 280kg/cm2 (4,000 psi)
2. Rebar Strength: #3~#5 fy: 2,800 kgf/cm2, #6~#11 fy= 4,200 kgf/cm2

CHART 2. CURING TIME TABLE

Temperature (°C)GellingFull Curing
590 min. 8 hr.
1040 min.4 hr.
2018 min.1.5 hr.
309 min.1 hr.
406 min.1 hr.
Please make pull off test for at least 24 hours after full cured.

CHART 3. FIXING CONSUMPTION PER CARTRIDGE

Anchor SizeHole Diameter
(mm)
Hole Depth
(mm)
Number of Fixings
150ml235ml345ml360ml380ml
M810803047697276
M1012901829424447
M12141101117252728
M161812569141415
M202417024666
M242821012344
M303527011222
M3640330X1111
Note: Based on continuous installation without interruptions or nozzle changes. Provided as a guide and will vary with temperature.
Related Products
380ml anchoring system polyester chemical anchor - 380ml 400ml 410ml coaxial polyester adhesive anchoring
380ml anchoring system polyester chemical anchor
GU-100 380ml

380ml polyester co-axial cartridge chemical anchor also called 400ml or 410ml cartridge in the market....

Details
380ml anchor system epoxy acrylate chemical anchor - 380ml epoxy acrylate resin
380ml anchor system epoxy acrylate chemical anchor
GU-600 380ml

380ml epoxy acrylate chemical anchor is coaxial cartridge design required special dispensing...

Details
150ml injectable vinylester chemical anchor - GU-2000 150ml Vinyl ester styrene free, injection mortar suitable for silicon gun
150ml injectable vinylester chemical anchor
GU-2000 150ml

150ml vinylester injection chemical anchor is design for DIY fixing market. It is very suitable...

Details
235ml injectable vinylester chemical anchor - GU-2000 235ml Vinyl ester styrene free, the clever injection mortar for anchoring in masonry and concrete
235ml injectable vinylester chemical anchor
GU-2000 235ml

235ml vinylester injection chemical anchor mortar is a high performance and rapid curing two-part...

Details
345ml injectable vinylester chemical anchor - GU-2000 345ml Vinyl ester styrene free, the powerful injection mortar for rebar connections and concrete
345ml injectable vinylester chemical anchor
GU-2000 345ml

345ml vinylester chemical anchor is great for fixing threaded rod and rebar on non-cracked...

Details
360ml injectable vinylester chemical anchor - GU-2000 360ml Vinyl ester styrene free, the powerful injection mortar for steelwork constructions
360ml injectable vinylester chemical anchor
GU-2000 360ml

360ml vinylester chemical anchoring mortar is the most popular resin cartridge system. The fast...

Details
Low temperature cure injectable vinylester resin - GU-2000 Vinyl ester styrene free, the high bonded injection mortar in winter environments
Low temperature cure injectable vinylester resin
GU-2000 380ml

Vinylester chemical anchor is the solution for cold weather adhesive anchoring applications...

Details
380ml coaxial cartridge caulking gun - Coaxial caulking gun - #807N
380ml coaxial cartridge caulking gun
#807N

#807N manual dispenser is for co-axial 380ml/410ml cartridge. Durable steel frame and high...

Details
380ml coaxial cartridge caulking gun - Coaxial caulking gun - G34-380
380ml coaxial cartridge caulking gun
G34-380

G34-380 manual dispenser is for 380/410ml co-axial adhesive cartridge with mechanical thrust...

Details
Mixing nozzle for 10:1 chemical anchor - Static mixer for 10:1 chemical anchor
Mixing nozzle for 10:1 chemical anchor
#817

Mixing nozzle is designed to mix and dispense two-component chemical anchor at the same time....

Details
Files Download
Vinylester Styrene Free Catalogue
Vinylester Styrene Free Catalogue

Bonding strength chart on dry concrete by different hole size and depth. Vinylester styrene free for all fixing demands.

Download
GU-2000 Vinylester Styrene Free Technical Data Sheet
GU-2000 Vinylester Styrene Free Technical Data Sheet

Technical information of anchor design, curing time, edge distance, consumption per hole and installation procedure.

Download
GU-2000 SGS Tensile Strength Testing Report
GU-2000 SGS Tensile Strength Testing Report

Vinylester pull out strength report for diverse bolt size on 4000psi concrete according to ASTM E488-96 by SGS lab.

Download
GU-2000 AIT Tensile Strength Diameter of 25mm
GU-2000 AIT Tensile Strength Diameter of 25mm

Vinylester tensile test report of rebar fixing for 25mm hole size by Thailand AIT engineering lab. According to local market demands, our products will...

Download
GU-2000 AIT Tensile Strength Diameter of 16mm
GU-2000 AIT Tensile Strength Diameter of 16mm

Vinylester tensile test report of rebar fixing for 16mm hole size by Thailand AIT engineering lab. According to local market demands, our products will...

Download
Installation Guide
Gallery

380ml injectable vinylester chemical anchor - Hollow block anchor sleeve chemical resin | Sold in 40 Countries Injectable Chemical Anchors Manufacturer Since 1997 | Good Use

Located in Taiwan since 1997, Good Use Hardware Co., Ltd. has been an injectable adhesive mortars and anchors manufacturer. Their main products, including 380ml injectable vinylester chemical anchor, injection cartridges, chemical mortars, chemical anchors, anchor capsules, polyester resins and vinylester resins, which are sold in 40 countries.

Reputable factory of chemical anchor in Taiwan produces the widest range of adhesive anchor solutions for your concrete anchoring applications. with more than 15 years manufacturing experience for Chemical Anchor System, Injection Cartridge System, Construction Chemical Mortar and more. Certified chemical anchor solutions with wide selections of adhesive materials including epoxy anchors, concrete anchors, resin anchors for heavy loads in rebar application, diamond drilled holes and anchoring in solid concrete. Non-drip formula, ideal for overhead installation. Chemical anchor bolt and anchor fixings included for efficient, hassle-free, labor-saving chemical anchoring.

Good Use has been offering customers certified and tested high-quality chemical anchors, both with advanced technology and 25 years of experience, Good Use ensures each customer's demands are met.