150ml Chemical Anchors of Polyester/Epoxy Acrylate/Vinylester2015/04/01 Good Use Hardware Co., Ltd.
150ml is special for DIY and hardware store market. Small volume for one-time disposable using and no special gun required. Used with normal silicon gun.
- Material: Polyester with styrene (Shelf life: 12 months)
- Material: Epoxy Acrylate with styrene (Shelf life: 18 months)
- Material: Vinylester styrene free (Shelf life: 18 months)
- Size: 150ml
- Mixing Ratio: 10:1
- Mixed color: Gray
- Standard Package: one cartridge with one mixer and plunger
150ml Small Volume Design for Silicon Gun
- Available for Polyester/Epoxy Acrylate/Vinylester.
- Used with normal silicon gun. No extra gun needed.
- Small volume for hardware store.
- Completed mixture.
Fixing onto solid bases
Where Chemical Anchor used for?
- Steel Dowels
- Hand Rails
- Sound Barriers
- Steel Brackets
- Bridge Beams
Application & Technical Dimension
1. Drill correct hole size and depth.
2. Blow out dust.
3. Clean the hole with brush.
4. Blow out remaining dust.
5. Inject adhesive from the bottom.
6. Insert into the hole.
7. Wait for few minutes. The steel and concrete will bond very firmly.
Ratio 10:1, DIY Market
Polyester with styrene chemical anchor is based material. This is small cartridge adhesive system for silicone gun, especially with pushed through the static mixer. Economical with reasonable price. Applicable for medium loads, DIY market, household and hardware fastener store.
Ratio 10:1, DIY Market
Epoxy acrylate cartridge is easy installation and economical, because this unique cartridge system can be applied using a standard silicone sealant application gun. Suitable for building materials, solid brick and sand-lime brick, fabricated steel, sign posts, safety rails, structural steel.
Ratio 10:1, Rapid cure
150ml two components injectable adhesive based on vinylester resin dispensed by general silicone gun. Convenient setting and fast curing can save time and more efficient. Especially use in corrosive environments as anti-acid and alkali feature. Low VOC can be used to indoor or green house installation. Apply to non-cracked concrete and fixing fasteners on masonry or stone, edge, hollow brick.
#215-AN, 150/280/300/310ml, 10:1 side-by-side
The caulking gun is single tube type also available for silicone. Material is aluminum alloy handle and steel trigger. Easy hook for hanging the caulking gun on a ladder. Suitable for the following capacity 150ml and 280ml 10:1 of polyester resin, epoxy acrylate and vinylester.
#215-IHR, 150/280/300/310ml, 10:1 side-by-side
This is a caulking gun designed for lightweight and economical price. The material for aluminum alloy and lightweight steel construction. Rotatable 360° frame. Convenient hook for hanging the caulking gun. It is suitable with 150ml, 280ml, 300ml general adhesive cartridge and sealant.
- File Download
- Contact Us
Good Use 150ml Chemical Anchors of Polyester/Epoxy Acrylate/Vinylester Introduction
Good Use Hardware Co., Ltd. is Taiwan supplier and manufacturer in producing chemical anchor in the industry. Good Use has been offering our customers high quality injection cartridge,chemical mortar,chemical anchor,anchor capsule,polyester resin,vinylester resin,epoxy acrylate resin,pure epoxy resin,styrene free resin,mixer nozzle,static mixer,plastic mixer,injection gun,caulking gun,dispenser,dispensing tool,dispensing gun,resin anchor since 1997. With both advanced technology and 15 years experience, Good Use always make sure to meet each customer's demand.