Cold Weather pure epoxy chemical anchor

Cold Weather pure epoxy chemical anchor

2015/01/01 Good Use Hardware Co., Ltd.
Super high duty chemical anchor GU-500SD 400ml
Super high duty chemical anchor GU-500SD 400ml

GU-500SD 400ml is designed for higher performance demands. With upgraded formula allows winter applications. With excellent performance in winter season, it is particularly for higher strength requirements. Styrene free low odor pure epoxy resin based chemical injection anchoring system can work in water saturated and damp environment.

Suitable for wet concrete, high chemical resistance, universal solution and heavier loads. Offer excellent adhesion to steel and concrete and has the highest performance and load values of all our systems. Used widely for loads in colder situations due to a low temperature range.


  • Model Name: GU-500SD
  • Material: Pure Epoxy
  • Shelf life: 18 months
  • Size: 400ml
  • Ratio: 3:1
  • Mixed color: Dark Green
  • Package: One cartridge with one mixer

Features & Benefits

  • Excellent Performance for Winter Season, no freeze in winter season. Cold weather formula.
  • Higher strength. Extra heavy duty bond and high load capacity.
  • Extra heavy duty bond and high load capacity.
  • Excellent adhesion on dry, wet holes.
  • Styrene free and low odor with VOC(Volatile Organic Compounds).
  • Non-sag.
  • ICC certification is pending.


  • Anchoring in large hole diameter and deep holes.
  • Wet concrete or damp environment and where heavy load are required.
  • Specail formula for winter season installation.

Cold weather application and heavy load

GU-500SD is designed for lower temperature and wet concrete. Our engineers have ability to design special formula to fit with your demands.
GU-500SD is upgraded formula for higher performance requirement. Heavy load for civil construction and infrastructure.

Water saturated concrete test and non-drip test

GU-500SD can install at wet or water saturated concrete.(Bonding strength will decrease than installed at dry concrete.)
Non-drip formula, ideal for overhead installation. Versatile and multi-purpose pure epoxy with longer curing time is more flexible on applications.


PressureDestroy Haul Strength (Kgf/KN)Safety Haul Strength (Kgf/KN)Working Standard (mm)
Concrete Strength4,000 psi280 kg/cm24,000 psi280 kg/cm2Hole DiameterHole Depth
Rebar No.#3(Φ10)3,62236.61,20712.21390
Remarks:1. Concrete Strength fc': 280kg/cm2 (4,000 psi)
2. Rebar Strength: #3~#5 fy: 2,800 kgf/cm2, #6~#11 fy= 4,200 kgf/cm2


Temperature (°C)GellingFull Curing
5~92 hr.90 hr.
10~1490 min.64 hr.
15~1945 min.28 hr.
20~2930 min.18 hr.
30~3920 min.7 hr.
4012 min.5 hr.
Please make pull out test over 24 hours after full cured.


Anchor SizeHole Diameter
Hole Depth
Number of Fixings
Note: Based on continuous installation without interruptions or nozzle changes. Provided as a guide and will vary with temperature.

How to use a caulking gun?

For 400ml side by side tube with ratio 3:1, Press it with your thumb. Pull the plunger back. Remove the screw cap and plug of GU-500SD 400ml chemical anchor. Screw on mixer nozzle. Make sure to put the cartridge in the correct position. The plunger of caulking gun is in the center of cartridge pistons. Pull the trigger to move the plungers of caulking gun.

Photo Gallery

  • 400ml tropical resin epoxy chemical anchor - Tropical epoxy resin
    400ml tropical resin epoxy chemical anchor
    GU-500 400ml 3:1

    Pure epoxy resin is no styrene. It's 400ml cartridge and provides slow cure with adequate working time in temperate climates. Apply for bonding threaded rod, high strength on construction sites and reinforcing bar hardware into drilled holes in solid concrete base materials.Easy installation and can be used in a wide range of base materials with high load-bearing. The pure epoxy is the newest chemical anchoring technology with an outstanding chemical resistance and industrial strength. Suitable for attachment of façades, projecting roofs, wooden constructions, metal constructions, metal profiles, consoles, balustrades, heavy machinery, bridge, sanitary fittings, pipe connections etc.

  • 650ml high temperature epoxy resin chemical anchor - Tropical environments epoxy resin
    650ml high temperature epoxy resin chemical anchor
    GU-500 650ml 1:1

    GU-500 is use pure epoxy resin materials. Provides Long cure times with adequate working time in temperate climates. No styrene and low odor. Apply for bonding to carbide and diamond core drilled holes, concrete wall, wooden construction.A cost effective product designed for general bonding of anchor studs, bolts, threaded bars, sockets, sleeves, wall ties and masonry fixings into brickwork, block work and concrete, ideally suited for perforated masonry when used in conjunction with metal and nylon sleeves.

  • 400ml dual component manual caulking gun - Cartridge guns - #810
    400ml dual component manual caulking gun

    Double-gripping plate technology, increased efficiency, quick job done easier, neater and with less hassle, 400ml cartridge longer dispensing tool, ergonomically designed composite construction.

  • 400ml dual component manual caulking gun - Cartridge guns - G34-400LA
    400ml dual component manual caulking gun

    Heavy-duty for professional application caulking gun is used as a tool for squeezing adhesive out from cartridges. Insert 400ml capacity into applicator gun. Increased durability, ergonomic handgrip to keep your wrist in natural and balanced position.

  • Mixing nozzles - Static mixer 818
    Mixing nozzles

    The 818 series static mixers are used to automatically mix two part adhesives during application. Can be used for 400ml and 650ml cartridges, designed for mixing ratios 1:1 and 3:1. Mixers are made of high grade polypropylene and disposable.

  • 400ml Empty Cartridge - 400ml Empty Cartridge
    400ml Empty Cartridge

    Volume capacity of large 400ml is nylon material. Fast blending two parts of resin after squeezing. Solid red sealing piston ensures well storing two materials in separated chamber.


Best Sale

Good Use Cold Weather pure epoxy chemical anchor Introduction

Good Use Hardware Co., Ltd. is Taiwan supplier and manufacturer in producing chemical anchor in the industry. Good Use has been offering our customers high quality injection cartridge,chemical mortar,chemical anchor,anchor capsule,polyester resin,vinylester resin,epoxy acrylate resin,pure epoxy resin,styrene free resin,mixer nozzle,static mixer,plastic mixer,injection gun,caulking gun,dispenser,dispensing tool,dispensing gun,resin anchor since 1997. With both advanced technology and 20 years experience, Good Use always make sure to meet each customer's demand.

Hot Products

Professional epoxy resin

Professional epoxy resin

Excellent bonding strength for rebar connections and extension anchoring. Bridges, civil structures, retrofitting.

Read More
High temperature epoxy resin

High temperature epoxy resin

Suitable working time for use in tropical climate. Fixing diamond drilled holes, deep embedment depths, large diameter rebar.

Read More
Winter concrete epoxy resin

Winter concrete epoxy resin

Special winter formula for anchoring at low temperature. For dry, wet, water saturated concrete.

Read More