New item. Nylon sleeve is applied to fix onto hollow brick2015/10/01 Good Use Hardware Co., Ltd.
For hollow brick, hollow block, perforated bricks, perforated sand-lime brick.
- Item: #819
- Size: M15X85
- For M8-M10 Threaded Rod
Nylon Sleeve for Hollow Brick and Block
Forms a solid plug of adhesive in the brick or block cavity to provide secure anchoring point.
Once the resin is cured you'll have a very strong anchorage that doesn't reply on expansion and the brick won't crack under load.
Fields of application:
- suitable for medium load
- various hollow materials, such as:Honeycomb brick, perforated sand lime brick, hollow blocks
- for fastening many profiled materials, such as anchor rods, perforated sleeves, reinforcing rods.
Features and Benefits:
- Corrosion resistant nylon.
- No expansion stress on brick.
- Non-destructive installation.
- Easy, simple and quick to install.
- Extensive range for various cost-efficient applications.
- Secure anchoring in perforated stone.
- Especially suitable for edge fastenings as the underground is not additionally strained by outer radial force.
- Anchoring through bonding and form mating between mortar, perforated sleeve, anchor rod and underground.
- Drill hole to specified diameter in brick or block using a drill bit.
- Brush and blow dust out of holes.
- Insert nylon sleeve into hole.
- Dispensing chemical anchor into sleeve.
- Insert threaded rod or stud into sleeve.
- Allow adhesive to cure before loading.
#819 M15 x 85
M15 x 85mm nylon injection sleeve for chemical anchor fixing on hollow brick. Available in grey, black and red colors. Easy to use, just insert the sleeve into the drilled hole and fill with resin, insert stud and leave to cure. Suitable fastener for solid brick, solid block made from lightweight concrete base material.
#819 M15 x 85 Black
Real nylon, rot-proof, high tensile strength and pressure resistance nylon injection sleeves. Suitable for fixing to perforated or hollow brickwork, concrete and natural stone and dry wall anchor for hollow structures and wallboard applications.
#819 M15 x 85 Gray
Nylon anchors designed to hold anchor bolt an expansion free anchor fixing. Used for hanging and mounting in wooden boards, interior designing and interior fixtures. Suitable for solid panel, hollow block and brick.
#819 M15 x 85 Red
High strong anchoring nylon sleeve for threaded rod on sand-lime solid brick, solid brick, hollow block.
#819 M16 x 85 Gray
Forms a solid plug of adhesive in the brick or block cavity to provide secure anchoring point. Once the resin is cured you'll have a very strong anchorage that doesn't reply on expansion and the brick won't crack under load.
#819 M20 x 85 Gray
- File Download
- Contact Us
Good Use New item. Nylon sleeve is applied to fix onto hollow brick Introduction
Good Use Hardware Co., Ltd. is Taiwan supplier and manufacturer in producing chemical anchor in the industry. Good Use has been offering our customers high quality injection cartridge,chemical mortar,chemical anchor,anchor capsule,polyester resin,vinylester resin,epoxy acrylate resin,pure epoxy resin,styrene free resin,mixer nozzle,static mixer,plastic mixer,injection gun,caulking gun,dispenser,dispensing tool,dispensing gun,resin anchor since 1997. With both advanced technology and 15 years experience, Good Use always make sure to meet each customer's demand.