New nylon injection sleeve

New nylon injection sleeve

2017/07/24 Good Use Hardware Co., Ltd.
Nylon injection sleeve for M12-M14 threaded rod
Nylon injection sleeve for M12-M14 threaded rod

Insert the threaded bar or studding into the centre of the sleeve. Once the resin is cured you'll have a very strong anchorage that doesn't reply on expansion and the brick won't crack under load.

For fixing to perforated or hollow brickwork, blockwork, concrete and precast units with chemical anchor resin systems.


  • Item: #819
  • Size: M20X85
  • For M12-M14 Threaded Rod

Features & Benefits

  • Corrosion resistant nylon.
  • No expansion stress on brick.
  • Reduces, controls consumption of resin.
  • Hole cleaning is not necessary.
  • Easy, simple and quick to install.
  • Stud alignment collar helps to keep studs central within the sleeve.
  • Especially suitable for edge fastenings as the underground is not additionally strained by outer radial force.

Easy to use, just insert the sleeve into the drilled hole and fill with resin, insert stud and leave to cure. Suitable for studs and bars.

Fields of application:

  • Suitable for heavy load.
  • Various hollow materials, such as: Honeycomb brick, perforated sand lime brick, hollow blocks.
  • For fastening many profiled materials, such as anchor rods, perforated sleeves, reinforcing rods.


  1. Drill hole to specified diameter in brick or block using a drill bit.
  2. Brush and blow dust out of holes.
  3. Insert nylon sleeve into hole.
  4. Dispensing chemical anchor into sleeve.
  5. Insert threaded rod or stud into sleeve.
  6. Allow adhesive to cure before loading.

Photo Gallery



Best Sale

Good Use New nylon injection sleeve Introduction

Good Use Hardware Co., Ltd. is Taiwan supplier and manufacturer in producing chemical anchor in the industry. Good Use has been offering our customers high quality injection cartridge,chemical mortar,chemical anchor,anchor capsule,polyester resin,vinylester resin,epoxy acrylate resin,pure epoxy resin,styrene free resin,mixer nozzle,static mixer,plastic mixer,injection gun,caulking gun,dispenser,dispensing tool,dispensing gun,resin anchor since 1997. With both advanced technology and 20 years experience, Good Use always make sure to meet each customer's demand.

Hot Products

Professional epoxy resin

Professional epoxy resin

Excellent bonding strength for rebar connections and extension anchoring. Bridges, civil structures, retrofitting.

Read More
High temperature epoxy resin

High temperature epoxy resin

Suitable working time for use in tropical climate. Fixing diamond drilled holes, deep embedment depths, large diameter rebar.

Read More
Winter concrete epoxy resin

Winter concrete epoxy resin

Special winter formula for anchoring at low temperature. For dry, wet, water saturated concrete.

Read More