Mixing nozzle for 10:1 chemical anchor | Sold in 40 Countries Injectable Chemical Anchors Manufacturer Since 1997 | Good Use

Static mixer for 10:1 chemical anchor / Injectable chemical anchor factory establishes in Taiwan. With 25 years experience in producing injection mortar and export to over 40 countries.

Mixing nozzle for 10:1 chemical anchor - Static mixer for 10:1 chemical anchor
  • Mixing nozzle for 10:1 chemical anchor - Static mixer for 10:1 chemical anchor

Mixing nozzle for 10:1 chemical anchor

#817

Chemical anchor mixer nozzle

Mixing nozzle is designed to mix and dispense two-component chemical anchor at the same time. Attached mixing nozzle to a dual cartridge, the two parts of adhesive will combine and mix by the spiral part in the nozzle while dispensing. A good mixing nozzle helps to control the dispensing volume and produce less waste. #817 mixing nozzle is ideal for Good Use chemical anchor with 10:1 mixing ratio.

Specification Of Chemical Anchor Mixing Nozzle

● Item No.: #817
● Suitable for Good Use GU-100, GU-600, GU-2000 chemical anchor sereis (150ml/235ml/280ml/345ml/360ml/380ml)
● Disposable and easy to replace

How to install chemical anchor?

1. Drill the specific diameter and depth. 2. Clean dust with brush and air blow pump. 3. Press out unmixed mortar which cannot be used. 4. Inject mixed mortar from the bottom of the drilled hole. 5. Insert and rotate the rebar/threaded rod/steel strip into the drilled hole. Don't touch the insert until full curing. Curing time refer to our TDS. The installation process will affect the bonding performance of chemical anchors.

Related Products
Mixing nozzle for 1:1 and 3:1 chemical anchor - Static mixer for 1:1 and 3:1 chemical anchor
Mixing nozzle for 1:1 and 3:1 chemical anchor
#818

Static mixer nozzles are applied to adhesive cartridges to mix and dispense two component adhesives....

Details
150ml anchoring system polyester chemical anchor - 150ml silicone gun tube polyester bonded anchor
150ml anchoring system polyester chemical anchor
GU-100 150ml

150ml polyester chemical anchor is the smallest volume in the range. It is available to work...

Details
235ml anchoring system polyester chemical anchor - 235ml side by side tube polyester bonded anchor
235ml anchoring system polyester chemical anchor
GU-100 235ml

Small volume 235ml side by side polyester chemical anchor is easy use for small area and most...

Details
345ml anchoring system polyester chemical anchor - 345ml two components polyester bonded anchor
345ml anchoring system polyester chemical anchor
GU-100 345ml

345ml polyester chemical anchor is middle size and more flexible in market. It needs a specific...

Details
360ml anchoring system polyester chemical anchor - 360ml two parts polyester adhesive anchoring
360ml anchoring system polyester chemical anchor
GU-100 360ml

360ml polyester chemical anchor is middle size and more flexible in market. It needs a specific...

Details
380ml anchoring system polyester chemical anchor - 380ml 400ml 410ml coaxial polyester adhesive anchoring
380ml anchoring system polyester chemical anchor
GU-100 380ml

380ml polyester co-axial cartridge chemical anchor also called 400ml or 410ml cartridge in the market....

Details
150ml anchor system epoxy acrylate chemical anchor - 150ml epoxy acrylate resin
150ml anchor system epoxy acrylate chemical anchor
GU-600 150ml

Single tube 150ml epoxy acrylate chemical anchor is a good option for DIY application. It is easy...

Details
235ml anchor system epoxy acrylate chemical anchor - 235ml epoxy acrylate resin
235ml anchor system epoxy acrylate chemical anchor
GU-600 235ml

235ml epoxy acrylate chemical anchor is small volume and good for home DIY with quick setting...

Details
345ml anchor system epoxy acrylate chemical anchor - 345ml epoxy acrylate resin
345ml anchor system epoxy acrylate chemical anchor
GU-600 345ml

345ml epoxy acrylate chemical anchor is popular middle size for most construction consumption....

Details
360ml anchor system epoxy acrylate chemical anchor - 360ml epoxy acrylate resin
360ml anchor system epoxy acrylate chemical anchor
GU-600 360ml

360ml epoxy acrylate chemical anchor is best-selling item for general fixations to reinforcement...

Details
380ml anchor system epoxy acrylate chemical anchor - 380ml epoxy acrylate resin
380ml anchor system epoxy acrylate chemical anchor
GU-600 380ml

380ml epoxy acrylate chemical anchor is coaxial cartridge design required special dispensing...

Details
150ml injectable vinylester chemical anchor - GU-2000 150ml Vinyl ester styrene free, injection mortar suitable for silicon gun
150ml injectable vinylester chemical anchor
GU-2000 150ml

150ml vinylester injection chemical anchor is design for DIY fixing market. It is very suitable...

Details
235ml injectable vinylester chemical anchor - GU-2000 235ml Vinyl ester styrene free, the clever injection mortar for anchoring in masonry and concrete
235ml injectable vinylester chemical anchor
GU-2000 235ml

235ml vinylester injection chemical anchor mortar is a high performance and rapid curing two-part...

Details
345ml injectable vinylester chemical anchor - GU-2000 345ml Vinyl ester styrene free, the powerful injection mortar for rebar connections and concrete
345ml injectable vinylester chemical anchor
GU-2000 345ml

345ml vinylester chemical anchor is great for fixing threaded rod and rebar on non-cracked...

Details
360ml injectable vinylester chemical anchor - GU-2000 360ml Vinyl ester styrene free, the powerful injection mortar for steelwork constructions
360ml injectable vinylester chemical anchor
GU-2000 360ml

360ml vinylester chemical anchoring mortar is the most popular resin cartridge system. The fast...

Details
380ml injectable vinylester chemical anchor - GU-2000 380ml Vinyl ester styrene free, the high bonded injection mortar for fast curing in tropical environments
380ml injectable vinylester chemical anchor
GU-2000 380ml

380ml fast hardening vinylester chemical anchor is good for hollow brick fixing with anchor...

Details
Gallery

Mixing nozzle for 10:1 chemical anchor - Chemical anchor mixer nozzle | Sold in 40 Countries Injectable Chemical Anchors Manufacturer Since 1997 | Good Use

Located in Taiwan since 1997, Good Use Hardware Co., Ltd. has been an injectable adhesive mortars and anchors manufacturer. Their main products, including Mixing nozzle for 10:1 chemical anchor, injection cartridges, chemical mortars, chemical anchors, anchor capsules, polyester resins and vinylester resins, which are sold in 40 countries.

Reputable factory of chemical anchor in Taiwan produces the widest range of adhesive anchor solutions for your concrete anchoring applications. with more than 15 years manufacturing experience for Chemical Anchor System, Injection Cartridge System, Construction Chemical Mortar and more. Certified chemical anchor solutions with wide selections of adhesive materials including epoxy anchors, concrete anchors, resin anchors for heavy loads in rebar application, diamond drilled holes and anchoring in solid concrete. Non-drip formula, ideal for overhead installation. Chemical anchor bolt and anchor fixings included for efficient, hassle-free, labor-saving chemical anchoring.

Good Use has been offering customers certified and tested high-quality chemical anchors, both with advanced technology and 25 years of experience, Good Use ensures each customer's demands are met.