Mixing nozzle

Mixing nozzle

#817

Chemical anchor mixer nozzle

High quality 817 series static mixers to mix two components in dual cartridges by dispenser. The various sizes and alternating angled elements ensure consistent and accurate dispensing with products of various viscosities and cure times. They enhance control, produce less waste and save time by eliminating manual mixing. Static mixer is polypropylene.

Specification

  • Item No.: #817
  • For 150ml/235ml/280ml/345ml/360ml/380ml cartridge

How to install chemical anchor?

1. Drill the specific hole size and depth. 2. Clean dust with brush and air blow pump. 3. Press out unmixed resin which can't be used. 4. Inject mixed resin into drilled hole and fill from the bottom. 5. Insert rebar/threaded rod/steel strip. Curing time refer to TDS. Don't touch until full curing. The installation process will affect the bonding performance of chemical anchors.



Related Products
  • Mixing nozzles - Static mixer 818
    Mixing nozzles
    #818

    The 818 series static mixers are used to automatically mix two part adhesives during application. Can be used for 400ml and 650ml cartridges, designed for mixing ratios 1:1 and 3:1. Mixers are made of high grade polypropylene and disposable.


  • 150ml anchoring system polyester chemical anchor - 150ml silicone gun tube polyester bonded anchor
    150ml anchoring system polyester chemical anchor
    GU-100 150ml

    Polyester with styrene chemical anchor is classic and most popular material for general purpose. Economical price satisfies most fixing demands of medium loads. Applicable for rebar doweling, handrail, facade, pipelines, awnings, brackets. Use with ordinary silicone gun no special extrusion tools.150ml is the smallest volume in product range. There are 235ml, 345ml, 360ml and 380ml available for diverse market preference. All volume cartridge for fixings in non-cracked concrete, masonry, brick, stone, perforated brick.


  • 235ml anchoring system polyester chemical anchor - 235ml side by side tube polyester bonded anchor
    235ml anchoring system polyester chemical anchor
    GU-100 235ml

    Polyester with styrene chemical anchor is classic and most popular material for general purpose. Economical price satisfies most fixing demands of medium loads. Applicable for rebar doweling, handrail, facade, pipelines, awnings, brackets. Use with special caulking gun to extrude resin.235ml side by side small volume easy use for small area. There are 150ml, 345ml, 360ml and 380ml available for diverse market preference. All volume cartridge for fixings in non-cracked concrete, masonry, brick, stone, perforated brick.


  • 345ml anchoring system polyester chemical anchor - 345ml two components polyester bonded anchor
    345ml anchoring system polyester chemical anchor
    GU-100 345ml

    Polyester with styrene chemical anchor is classic and most popular material for general purpose. Economical price satisfies most fixing demands of medium loads. Applicable for rebar doweling, handrail, facade, pipelines, awnings, brackets. Use with special caulking gun to extrude resin.345ml injection mortar is middle size and more flexible in market. There are 150ml, 235ml, 360ml and 380ml available for diverse market preference. All volume cartridge for fixings in non-cracked concrete, masonry, brick, stone, perforated brick.


  • 360ml anchoring system polyester chemical anchor - 360ml two parts polyester adhesive anchoring
    360ml anchoring system polyester chemical anchor
    GU-100 360ml

    Polyester with styrene chemical anchor is classic and most popular material for general purpose. Economical price satisfies most fixing demands of medium loads. Applicable for rebar doweling, handrail, facade, pipelines, awnings, brackets. Use with special caulking gun to extrude resin.360ml injection mortar is middle size and more flexible in market. There are 150ml, 235ml, 345ml and 380ml available for diverse market preference. All volume cartridge for fixings in non-cracked concrete, masonry, brick, stone, perforated brick.


  • 380ml anchoring system polyester chemical anchor - 380ml 400ml 410ml coaxial polyester adhesive anchoring
    380ml anchoring system polyester chemical anchor
    GU-100 380ml

    Polyester with styrene chemical anchor is classic and most popular material for general purpose. Economical price satisfies most fixing demands of medium loads. Applicable for rebar doweling, handrail, facade, pipelines, awnings, brackets. Use with special caulking gun to extrude resin.380ml co-axial cartridge also called 400ml and 410ml in the market. There are 150ml, 235ml, 345ml and 360ml available for diverse market preference. All volume cartridge for fixings in non-cracked concrete, masonry, brick, stone, perforated brick.


  • 150ml anchor system epoxy acrylate chemical anchor - 150ml epoxy acrylate resin
    150ml anchor system epoxy acrylate chemical anchor
    GU-600 150ml

    Epoxy acrylate cartridge is easy installation and economical, because this unique cartridge system can be applied using a standard silicone sealant application gun. Suitable for building materials, solid brick and sand-lime brick, fabricated steel, sign posts, safety rails, structural steel.


  • 235ml anchor system epoxy acrylate chemical anchor - 235ml epoxy acrylate resin
    235ml anchor system epoxy acrylate chemical anchor
    GU-600 235ml

    Epoxy acrylate resin is high loads for medium. The cartridge is general 235ml volume. Convenient setting adhesive anchoring system with special caulking gun. Application with one action dispensing and two parts mixing through nozzle. Chemical anchors use to cracked concrete, reuse on small reinforced work.


  • 345ml anchor system epoxy acrylate chemical anchor - 345ml epoxy acrylate resin
    345ml anchor system epoxy acrylate chemical anchor
    GU-600 345ml

    Epoxy acrylate is high chemical resistance reinforcement rebar adhesive. No drip, low odor, Good chemical resistance. High performance injection mortar for solid and concrete supports. On-site easy mixing and use. Suitable for rods and reinforcing bars, concrete, natural stone, steel bar, aerated concrete.


  • 360ml anchor system epoxy acrylate chemical anchor - 360ml epoxy acrylate resin
    360ml anchor system epoxy acrylate chemical anchor
    GU-600 360ml

    A two component chemical anchoring injection system for epoxy acrylate resin. It has been developed as a good resistance chemical for high load and critical applications including structural steel, mechanical services, starter bars, etc.


  • 380ml anchor system epoxy acrylate chemical anchor - 380ml epoxy acrylate resin
    380ml anchor system epoxy acrylate chemical anchor
    GU-600 380ml

    2-component injection resin based on a epoxy acrylate for anchoring bolt and rebar. It's medium-high loads. high resistance to chemical attack. It is no shrinkage, product with high bond strength and fast strength gain. Coaxial completely mixed to simultaneously dispensed from through a static mixing nozzle. Suitable for anchoring dynamically stressed structures, building components.


  • 150ml injectable vinylester chemical anchor - GU-2000 150ml Vinyl ester styrene free, injection mortar suitable for silicon gun
    150ml injectable vinylester chemical anchor
    GU-2000 150ml

    GU-2000 150ml is design for DIY fixing market. A two component 10:1 resin chemical anchoring injection system. Convenient setting and fast curing in low temperature. A formulation derived from thread rods, studs, rebar into concrete, masonry, stone and hollow brick. Used for high performance structural applications.No styrene is environmentally friendly item, 150ml packing very suitable house repair and building fixing project. There are 235ml, 345ml, 360ml and 380ml available for diverse market preference.


  • 235ml injectable vinylester chemical anchor - GU-2000 235ml Vinyl ester styrene free, the clever injection mortar for anchoring in masonry and concrete
    235ml injectable vinylester chemical anchor
    GU-2000 235ml

    GU-2000 235ml is a high performance, rapid curing two-part chemical anchoring system based on a high reactivity Vinyl ester. Applied in side by side action this resin will produce a strong, chemical resistant fixing.


  • 345ml injectable vinylester chemical anchor - GU-2000 345ml Vinyl ester styrene free, the powerful injection mortar for rebar connections and concrete
    345ml injectable vinylester chemical anchor
    GU-2000 345ml

    The injection mortar GU-2000 has a range of test report under ETAG 001 Part 5 standard for non-cracked concrete for thread rod and rebar connections. The GU-2000 has an extended processing time that prevents the premature hardening of the mortar at different temperatures. It is ideally suited to large drill hole depths.


  • 360ml injectable vinylester chemical anchor - GU-2000 360ml Vinyl ester styrene free, the powerful injection mortar for steelwork constructions
    360ml injectable vinylester chemical anchor
    GU-2000 360ml

    The Vinyl ester GU-2000 360ml is the most popular resin cartridge system. The fast curing in tropical grade making it convenient to use in guard rails, staircase, machines, awnings, gate and any hollow blocks made from concrete, stone or solid sand-lime brick.


  • 380ml injectable vinylester chemical anchor - GU-2000 380ml Vinyl ester styrene free, the high bonded injection mortar for fast curing in tropical environments
    380ml injectable vinylester chemical anchor
    GU-2000 380ml

    The Vinyl ester styrene free is available in tropical environment and use for fast curing request project. The 380ml cartridge tube is a unique coaxial cartridge system. The 380ml with mixing ratio 10:1 also called 400ml or 410ml in the market. Special dispenser is required to use with the cartridge.



Gallery

Menu

Best Sale

Mixing nozzle | Chemical Anchor Manufacturer - Good Use

Good Use Hardware Co., Ltd. is one of prime Mixing nozzle | chemical anchors suppliers based in Taiwan since 1997.

Certified chemical anchor solutions with wide selections of adhesive materials including epoxy anchors, concrete anchors, resin anchors for heavy loads in rebar application, diamond drilled holes and anchoring in solid concrete. Non-drip formula, ideal for overhead installation. Chemical anchor bolt and anchor fixings included for efficient, hassle-free, labor-saving chemical anchoring.

Good Use has been offering customers certified tested high-quality chemical anchors. Both with advanced technology and 20 years of experience, Good Use ensures each customer's demands are met.


Hot Products

Professional epoxy resin

Professional epoxy resin

Excellent bonding strength for rebar connections and extension anchoring. Bridges, civil structures, retrofitting.

Read More
High temperature epoxy resin

High temperature epoxy resin

Suitable working time for use in tropical climate. Fixing diamond drilled holes, deep embedment depths, large diameter rebar.

Read More
Winter concrete epoxy resin

Winter concrete epoxy resin

Special winter formula for anchoring at low temperature. For dry, wet, water saturated concrete.

Read More