Mixing nozzles

Mixing nozzles

#818

Chemical cartridge static mixer

The 818 series static mixers are used to automatically mix two part adhesives during application. Can be used for 400ml and 650ml cartridges, designed for mixing ratios 1:1 and 3:1. Mixers are made of high grade polypropylene and disposable.

Specification

  • Item No.: #818
  • For 400ml/650ml cartridge

How to install chemical anchor?

1. Drill the specific hole size and depth. 2. Clean dust with brush and air blow pump. 3. Press out unmixed resin which can't be used. 4. Inject mixed resin into drilled hole and fill from the bottom. 5. Insert rebar/threaded rod/steel strip. Curing time refer to TDS. Don't touch until full curing. The installation process will affect the bonding performance of chemical anchors.



Related Products
  • Mixing nozzle - Static mixer 817
    Mixing nozzle
    #817

    High quality 817 series static mixers to mix two components in dual cartridges by dispenser. The various sizes and alternating angled elements ensure consistent and accurate dispensing with products of various viscosities and cure times. They enhance control, produce less waste and save time by eliminating manual mixing. Static mixer is polypropylene.


  • 400ml tropical resin epoxy chemical anchor - 400ml two part epoxy resin anchoring adhesive
    400ml tropical resin epoxy chemical anchor
    GU-500 400ml 3:1

    GU-500 400ml is a two component 3:1 ratio, pure epoxy based chemical mortar that has excellent performance for rebar connections and heavy anchoring. Resin and hardener are dispensed and mixed simultaneously through a static mixer nozzle and used in fixing rebars, threaded rods, machinery, staircases, reinforcement bars to concrete, stone, masonry, brick, rock, and other applications. Pure epoxy adhesive anchor can provide a longer working time and allow better flexibility during installation.GU-500 400ml two part epoxy resin anchoring adhesive is styrene free and low odor. It can be used indoors or in unventilated areas without health and safety worries. Available cartridge sizes: 400ml (3:1) side by side cartridge and 650ml (1:1) side by side cartridge.


  • Cold Weather pure epoxy chemical anchor - Extreme environments pure epoxy resin anchor
    Cold Weather pure epoxy chemical anchor
    GU-500SD 400ml 3:1

    GU-500SD 400ml is a two-component 3:1 ratio, high strength pure epoxy bonded anchoring system that has ultimate performance for rebar connections, heavy anchoring on dry concrete and wet concrete, and cracked and uncracked concrete. Resin and hardener are dispensed and mixed simultaneously through a static mixer nozzle and used in fixing rebars, threaded rods, machinery, staircases, reinforcement bars to concrete, stone, masonry, brick, rock, and other applications. Advanced-formula pure epoxy fixing adhesive is workable in low temperatures and high temperatures. Non-sag paste allows for overhead and wall application.GU-500SD 400ml two component pure epoxy resin chemical anchor is styrene free and low odor. It can be used indoors or in unventilated areas without health and safety worries. Available cartridge sizes: 400ml (3:1) and 585ml (3:1) side by side cartridges.


  • High strength epoxy resin for solar panel mounting system - High temperatures dual component pure epoxy chemical anchor
    High strength epoxy resin for solar panel mounting system
    GU-500SD 400ml 3:1

    GU-500SD 400ml is a two component 3:1 ratio, pure epoxy based chemical mortar that has ultimate performance for rebar connections, heavy anchoring on dry concrete and wet concrete, and cracked and uncracked concrete. Resin and hardener are dispensed and mixed simultaneously through a static mixer nozzle and used in fixing rebars, threaded rods, machinery, staircases, reinforcement bars to concrete, stone, masonry, brick, rock, and other applications. Advanced-formula pure epoxy fixing adhesive can stand high temperatures and provide a longer working time but fast full curing time. It allows better flexibility during installation. Non-sag paste allows for overhead and wall application. Also good for installing solar panels in hot conditions.GU-500SD 400ml dual component epoxy resin chemical anchoring system is styrene free and low odor. It can be used indoors or in unventilated areas without health and safety worries. Available cartridge sizes: 400ml (3:1) and 585ml (3:1) side by side cartridges.


  • 650ml high temperature epoxy resin chemical anchor - 650ml two components pure epoxy summer epoxy adhesive
    650ml high temperature epoxy resin chemical anchor
    GU-500 650ml 1:1

    GU-500 650ml is a two component 1:1 ratio, pure epoxy based chemical anchor that has excellent performance for anchoring threaded rods and rebars. Resin and hardener are dispensed and mixed simultaneously through a static mixing nozzle with an universal caulking gun and to fix machinery, staircases, reinforcement bars, rebars, and threaded rods to concrete, stone, masonry, brick, rock, and other construction fixings. Pure epoxy chemical anchoring system can provide a longer working time and have better flexibility during installation.GU-500 650ml two components pure epoxy summer epoxy adhesive is styrene free and low odor. It can be used indoors or in unventilated areas without health and safety worries. Available cartridge sizes: 400ml (3:1) side by side cartridge and 650ml (1:1) side by side cartridge.



Gallery

Menu

Best Sale

Mixing nozzles | Chemical Anchor Manufacturer - Good Use

Good Use Hardware Co., Ltd. is one of prime Mixing nozzles | chemical anchors suppliers based in Taiwan since 1997.

Certified chemical anchor solutions with wide selections of adhesive materials including epoxy anchors, concrete anchors, resin anchors for heavy loads in rebar application, diamond drilled holes and anchoring in solid concrete. Non-drip formula, ideal for overhead installation. Chemical anchor bolt and anchor fixings included for efficient, hassle-free, labor-saving chemical anchoring.

Good Use has been offering customers certified tested high-quality chemical anchors. Both with advanced technology and 20 years of experience, Good Use ensures each customer's demands are met.


Hot Products

Professional epoxy resin

Professional epoxy resin

Excellent bonding strength for rebar connections and extension anchoring. Bridges, civil structures, retrofitting.

Read More
High temperature epoxy resin

High temperature epoxy resin

Suitable working time for use in tropical climate. Fixing diamond drilled holes, deep embedment depths, large diameter rebar.

Read More
Winter concrete epoxy resin

Winter concrete epoxy resin

Special winter formula for anchoring at low temperature. For dry, wet, water saturated concrete.

Read More