High Strength Epoxy For Concrete Mounting System
GU-500SD 400ml 3:1
Epoxy Anchor Mortar For Solar Panel Fixing
High strength epoxy anchoring for aluminum solar panel concrete mounting system. Top-quality epoxy can sustain under high heat and heavy loading.
Ultimate performance for rebar connections, heavy anchoring on dry concrete, wet concrete, cracked and uncracked concrete. Advanced-formula pure epoxy adhesive is workable at wide temperature and crucial anchoring. Quality tested and approved by Germany lab. Non-sag allows for overhead and suspended ceiling application. There is also 585ml available in the range.
Chemical fixing system - Ultimate performance pure epoxy chemical anchor
High-end epoxy mortar for heavy anchoring and critical conditions. In variation case of anchoring work which required higher performance to satisfy and secure the anchoring in dry, wet, uncracked, cracked concrete even in seismic conditions or temperature variation and installation limitation. We tested diverse anchoring condition in ETAG approval lab and with report to compare. Epoxy injectable adhesive anchor is strongest one of bonding fasteners which is growing demands.
Specification of GU-500SD Pure epoxy chemical anchor
- Material: Pure Epoxy
- Model Number: GU-500SD
- Size: 400ml
- Shelf Life: 18 months
- Mixing Ratio: 3:1
- Mixing Color: Orange
- Standard Package: One cartridge with one mixer
- Other Accessory: Mixer, caulking gun, nylon sleeve, air pump, brush
Good Use pure epoxy chemical anchor has good performance on wet holes and cracked concrete
- Heavy duty loading
- Non-sag for overhead and wall application
- Good performance on wet and cracked concrete holes
- Ideal for deep embedment and large holes
- Provide longer working time
- No shrinkage
- Orange color for easy monitoring
- Styrene free, low odor, and LEED tested for VOC (Volatile Organic Compounds)
- No health or safety concern to slow down your work
- ETA in process.
All Good Use chemical anchors have done sustained loads test at IWB lab in Germany
There is no qualified lab with equipment for testing bonding anchor according ETA regulations in Asia. All our items are tested by EAD 330499-00-0601 which is comprehensive plan for both of rebar and threaded rods. We cooperate and consult with leading experts in Europe who dedicate in the fasteners field for more than two decades. We keep improving our research capacity and upgrade international approvals of chemical anchor.
Epoxy chemical anchor for solar panel fixing
There are many innovative ways of solar panel design and installation. This is special case and request in USA for bonding aluminum frame on concrete track rail. Non-standard anchoring that sustained bonding under high heat and windy are required. We look for more possibility and challenge of chemical anchor.
Strongest epoxy anchoring for all fixing solution
Non-drip formula, ideal for overhead installation and suspension anchorage. Versatile and multi-purpose pure epoxy is longer curing time and more flexible on applications. As global warming, climate suitability and wide temperature applicability are important for chemical anchor development. We equip temperature facilities to simulate different anchoring temperature worldwide and do multiple testing to ensure the quality. The steady characteristic of epoxy is most used in tropical zone.
Thông số kỹ thuật
CHART 1. SOLID SUBSTRATE REBAR INSTALLATION DETAILS
|Pressure||Destroy Haul Strength (Kgf/KN)||Safety Haul Strength (Kgf/KN)||Working Standard (mm)|
|Concrete Strength||4,000 psi||280 kg/cm2||4,000 psi||280 kg/cm2||Hole Diameter||Hole Depth|
|Remarks:||1. Concrete Strength fc': 280kg/cm2 (4,000 psi)|
2. Rebar Strength: #3~#5 fy: 2,800 kgf/cm2, #6~#11 fy= 4,200 kgf/cm2
CHART 2. CURING TIME TABLE
|Temperature (°C)||Gelling||Full Curing|
|5~9||2 hr.||90 hr.|
|10~14||90 min.||64 hr.|
|15~19||45 min.||28 hr.|
|20~29||30 min.||18 hr.|
|30~39||20 min.||7 hr.|
|40||12 min.||5 hr.|
|Please make pull off test for at least 24 hours after full cured.|
CHART 3. FIXING CONSUMPTION PER CARTRIDGE
|Anchor Size|| Hole Diameter|
| Hole Depth|
|Number of Fixings|
|Note: Based on continuous installation without interruptions or nozzle changes. Provided as a guide and will vary with temperature.|
How to use a caulking gun?
1. There is a small trigger on the back of the caulking gun. Press the release trigger with your thumb. This will loosen the long steel rod that runs through the entirety of the frame. 2. Pull the plunger all the way back. 3. Remove the white cap and plug of tube and then screw the mixer nozzle on to the tube. Insert the flat end of the tube into the back of the gun first and put the tube with the mixer nozzle in the front. Pull the handle trigger to move the plungers of caulking gun. Make sure that the plungers of caulking gun are in the center of tube pistons. It is very important to put the tube in the correct position.
- Related Products
GU-500 400ml 3:1
400ml epoxy chemical anchor is 3:1 injectable cartridge for rebar connections and heavy anchoring. Suitable for construction in tropical or summer.Epoxy satisfy the demand for high strength, wide temperature range and nonstandard installation on mostly case. Outstanding tension test by Germany lab according to EAD 330499-00-0601 which is bonded fastener use in concrete with rebar and threaded rod. Epoxy injection mortar can be used indoors or unventilated areas without health and safety concerns. There is also 585ml available in the range.
GU-500 650ml 1:1
1:1 ratio 650ml epoxy base injection mortar for anchoring projects in high temperature country. Use with universal 1:1 dispensing tools.Two components pure epoxy summer epoxy adhesive is styrene free and low odor to fix machinery, staircases, reinforcement bars, rebars, and threaded rods to concrete, stone, masonry, brick, rock, and other construction fixings. Pure epoxy chemical anchoring system can provide a longer working time and have better flexibility during installation. It can be used indoors or in unventilated areas without health and safety concerns. There is also 600ml available in the range.
GU-500SD 400ml 3:1
GU-500SD 400ML is strongest in all chemical anchoring. Remarkable at cold weather, cracked concrete and water saturated holes.Ultimate performance for rebar connections, heavy anchoring on dry concrete, wet concrete, cracked and uncracked concrete. Advanced-formula pure epoxy adhesive is workable at wide temperature and crucial anchoring. Quality tested and approved by Germany lab. Non-sag allows for overhead and suspended ceiling application. There is also 585ml available in the range.
#810 caulking gun is a price option for two component epoxy 400ml cartridge with mixing ration 3:1. High value caulking gun with good price. For high viscosity adhesive or using at low temperature, you can refer to G34-400LA dispenser.
G34-400LA dispenser is heavy-duty and efficient dispensing for 3:1 400ml epoxy adhesive. High quality cast aluminum handle for day long comfortable use. Mechanical thrust ratio is 18:1, stroke 5.5mm and maximum force 400kgf (3.9kN). If cartridge ratio is 1:1 & 2:1, please check dispenser G34-400.
Static mixer nozzles are applied to adhesive cartridges to mix and dispense two component adhesives. Good Use Hardware designed the mixing nozzles according to the cartridges to ensure both are fit and able to dispense well-mixed adhesives. #818 mixing nozzle is ideal for Good Use chemical anchor with 1:1 and 3:1 mixing ratio.
Volume capacity of large 400ml is nylon material. Fast blending two parts of resin after squeezing. Solid red sealing piston ensures well storing two materials in separated chamber.
- Files Download
Bonding strength table on dry concrete by different hole sizes and depth. Especially for big diameter rebars/threaded rods.
Technical information of anchor design, curing time, edge distance, consumption per hole and installation procedure for GU-500SD pure epoxy.
- Bộ sưu tập
- Các sản phẩm
- Ứng dụng
Câu hỏi thường gặp
- Are you a manufacturer?
- Can you customize the formula of the chemical anchor (ODM)?
- What is the difference between the chemical anchors?
- What is Styrene?
- What kind of cartridge type do you have and what is the capacity?
- What is the gelling time and full curing time?
- How do you conduct quality control?
- What is the shelf life for chemical anchors? And how to store them?
- How to keep the used chemical anchors if it is not finish?
- How to install the chemical anchor?
- Temperature too cold to install the chemical anchor?
- Order & Payment
- Products Information
- Liên hệ chúng tôi
High Strength Epoxy For Concrete Mounting System | Chemical Anchor Manufacturer - Good Use
Good Use Hardware Co., Ltd. is one of prime High Strength Epoxy For Concrete Mounting System | chemical anchors suppliers based in Taiwan since 1997.
Certified chemical anchor solutions with wide selections of adhesive materials including epoxy anchors, concrete anchors, resin anchors for heavy loads in rebar application, diamond drilled holes and anchoring in solid concrete. Non-drip formula, ideal for overhead installation. Chemical anchor bolt and anchor fixings included for efficient, hassle-free, labor-saving chemical anchoring.
Good Use has been offering customers certified tested high-quality chemical anchors. Both with advanced technology and 20 years of experience, Good Use ensures each customer's demands are met.