400ml dual component manual caulking gun

400ml dual component manual caulking gun

#810

3:1 manual caulking applicator for epoxy 400ml cartridge

#810 caulking gun is a price option for two component epoxy 400ml cartridge with mixing ration 3:1. High value caulking gun with good price. For high viscosity adhesive or using at low temperature, you can refer to G34-400LA dispenser.

400ml epoxy chemical anchor caulking gun

Epoxy chemical anchor mostly is with bigger volume which required heavy duty caulking gun. The caulking gun quality is crucial when the cartridge size is bigger and in cold weather application that require more energy to squeeze. A good tool is easy to use and non-drip.



Branding on manual dispenser by logo printing or logo sticker

We can customize your logo on dispenser by many ways. Logo sticker is less cost, time saving, no order quantity limits and flexible design. It also can print on the steel frame directly that will require MOQ and cost increasing. You can make with LOGO, brand name or website on dispenser. Tailor-made color is also acceptable, please offer pantone number to verify the color. We will discuss all details according to your demands and offer best solutions.

Specification of #810 400ml dual component manual caulking gun

  • Item No.: #810
  • For 400ml side by side tube
  • Color: Blue
  • Cartridge ratio: 3:1
  • Thrust ratio: 25:1
  • Handle: Aluminum Alloy
  • Trigger: Metal
  • Carriage: Metal
  • Suitable for Good Use 400ml cartridge of Pure Epoxy.

#810 chemical anchor caulking applicator provides efficient work with double gripping

  • Steady quality with competitive price
  • Easy installation and operation
  • Energy save design
  • High quality for long-term using
  • Anti-drip
  • Press the trigger for short time pause or pulling out the steel arm

How to use a caulking gun?

1. There is a small trigger on the back of the caulking gun. Press the release trigger with your thumb. This will loosen the long steel rod that runs through the entirety of the frame. 2. Pull the plunger all the way back. 3. Remove the white cap and plug of tube and then screw the mixer nozzle on to the tube. Insert the flat end of the tube into the back of the gun first and put the tube with the mixer nozzle in the front. Pull the handle trigger to move the plungers of caulking gun. Make sure that the plungers of caulking gun are in the center of tube pistons. It is very important to put the tube in the correct position.



Storage and re-use

  • Store the caulking gun with the plunger head fully retracted.
  • Clean off any spills or leaks immediately to maximize the life of the gun.

Standard Packing

  • 12pcs per carton
  • Carton dimension: 37x31x27.5cm(H)
  • N.W.: 14.4KGS
  • G.W.: 15KGS
  • Other packing requirements, please check with us.
Related Products
  • 400ml Tropical Epoxy Chemical Anchor - 400ml two part epoxy resin anchoring adhesive
    400ml Tropical Epoxy Chemical Anchor
    GU-500 400ml 3:1

    400ml epoxy chemical anchor is 3:1 injectable cartridge for rebar connections and heavy anchoring. Suitable for construction in tropical or summer. Epoxy satisfy the demand for high strength, wide temperature range and nonstandard installation on mostly case. Outstanding tension test by Germany lab according to EAD 330499-00-0601 which is bonded fastener use in concrete with rebar and threaded rod. Epoxy injection mortar can be used indoors or unventilated areas without health and safety concerns. There is also 585ml available in the range.


  • Cold Weather Epoxy Chemical Anchor - Extreme environments pure epoxy resin anchor
    Cold Weather Epoxy Chemical Anchor
    GU-500SD 400ml 3:1

    GU-500SD 400ML is strongest in all chemical anchoring. Remarkable at cold weather, cracked concrete and water saturated holes. Ultimate performance for rebar connections, heavy anchoring on dry concrete, wet concrete, cracked and uncracked concrete. Advanced-formula pure epoxy adhesive is workable at wide temperature and crucial anchoring. Quality tested and approved by Germany lab. Non-sag allows for overhead and suspended ceiling application. There is also 585ml available in the range.


  • High Strength Epoxy For Concrete Mounting System - High temperatures dual component pure epoxy chemical anchor
    High Strength Epoxy For Concrete Mounting System
    GU-500SD 400ml 3:1

    High strength epoxy anchoring for aluminum solar panel concrete mounting system. Top-quality epoxy can sustain under high heat and heavy loading. Ultimate performance for rebar connections, heavy anchoring on dry concrete, wet concrete, cracked and uncracked concrete. Advanced-formula pure epoxy adhesive is workable at wide temperature and crucial anchoring. Quality tested and approved by Germany lab. Non-sag allows for overhead and suspended ceiling application. There is also 585ml available in the range.


  • 400ml dual component manual caulking gun - Cartridge guns - G34-400LA
    400ml dual component manual caulking gun
    G34-400LA

    G34-400LA dispenser is heavy-duty and efficient dispensing for 3:1 400ml epoxy adhesive. High quality cast aluminum handle for day long comfortable use. Mechanical thrust ratio is 18:1, stroke 5.5mm and maximum force 400kgf (3.9kN). If cartridge ratio is 1:1 & 2:1, please check dispenser G34-400.


  • 385ml double tube glue gun - 385ml cartridge guns
    385ml double tube glue gun
    G34-385

    G34-385 dripless adhesive dispenser is designed for 385ml 3:1 side by side cartridge. The mechanical thrust ratio: 18:1 / Stroke: 5.5mm and suitable for high viscosity sealant with maximum force is 400kgf (3.9kN). Lightweight body, more efficient and easier to use, excellent working time.


  • 585ml double tube glue gun - 585ml cartridge guns
    585ml double tube glue gun
    HC7-585

    HC7-585 is twin Component applicator for 585ml & 385ml cartridge. Mechanical thrust ratio is 26:1, Stroke 4mm and maximum force 500kgf (4.9kN). Powerful gripping plate for greater durability, easy to release and high viscosity sealant.



Files Download

Bộ sưu tập

Menu

Best Sale

400ml dual component manual caulking gun | Chemical Anchor Manufacturer - Good Use

Good Use Hardware Co., Ltd. is one of prime 400ml dual component manual caulking gun | chemical anchors suppliers based in Taiwan since 1997.

Certified chemical anchor solutions with wide selections of adhesive materials including epoxy anchors, concrete anchors, resin anchors for heavy loads in rebar application, diamond drilled holes and anchoring in solid concrete. Non-drip formula, ideal for overhead installation. Chemical anchor bolt and anchor fixings included for efficient, hassle-free, labor-saving chemical anchoring.

Good Use has been offering customers certified tested high-quality chemical anchors. Both with advanced technology and 20 years of experience, Good Use ensures each customer's demands are met.


Hot Products

Professional epoxy resin

Professional epoxy resin

Excellent bonding strength for rebar connections and extension anchoring. Bridges, civil structures, retrofitting.

Đọc Thêm
High temperature epoxy resin

High temperature epoxy resin

Suitable working time for use in tropical climate. Fixing diamond drilled holes, deep embedment depths, large diameter rebar.

Đọc Thêm
Winter concrete epoxy resin

Winter concrete epoxy resin

Special winter formula for anchoring at low temperature. For dry, wet, water saturated concrete.

Đọc Thêm