High Temperature Epoxy Anchoring | Chemical Anchor Manufacturer - Good Use
Good Use Hardware Co., Ltd. is one of prime High Temperature Epoxy Anchoring | chemical anchors suppliers based in Taiwan since 1997. Certified chemical anchor solutions with wide selections of adhesive materials including epoxy anchors, concrete anchors, resin anchors for heavy loads in rebar application, diamond drilled holes and anchoring in solid concrete. Non-drip formula, ideal for overhead installation. Chemical anchor bolt and anchor fixings included for efficient, hassle-free, labor-saving chemical anchoring. 1:1 ratio 650ml epoxy base injection mortar for anchoring projects in high temperature country. Two components pure epoxy summer epoxy adhesive is styrene free and low odor to fix machinery, staircases, reinforcement bars, rebars, and threaded rods to concrete, stone, masonry, brick, rock, and other construction fixings. Pure epoxy chemical anchoring system can provide a longer working time and have better flexibility during installation. It can be used indoors or in unventilated areas without health and safety concerns. There is also 600ml available in the range.
High Temperature Epoxy Anchoring
GU-500 650ml 1:1
Slow Cure Epoxy Resin Chemical Mortar
1:1 ratio 650ml epoxy base injection mortar for anchoring projects in high temperature country.
Two components pure epoxy summer epoxy adhesive is styrene free and low odor to fix machinery, staircases, reinforcement bars, rebars, and threaded rods to concrete, stone, masonry, brick, rock, and other construction fixings. Pure epoxy chemical anchoring system can provide a longer working time and have better flexibility during installation. It can be used indoors or in unventilated areas without health and safety concerns. There is also 600ml available in the range.
Chemisches Befestigungssystem - Chemischer Anker aus reinem Epoxid mit ultimativer Leistung
High-end epoxy mortar for heavy anchoring and critical conditions. In variation case of anchoring work which required higher performance to satisfy and secure the anchoring in dry, wet, uncracked, cracked concrete even in seismic conditions or temperature variation and installation limitation. We tested diverse anchoring condition in ETAG approval lab and with report to compare. Epoxy injectable adhesive anchor is strongest one of bonding fasteners which is growing demands.
Spezifikation des chemischen Ankers GU-500 Pure Epoxy
- Material: Pure Epoxy
- Model Number: GU-500
- Size: 650ml
- Shelf Life: 18 months
- Mixing Ratio: 1:1
- Mixed Color: Gray
- Standard Package: One cartridge with one mixer
- Other Accessory: Mixer, caulking gun, nylon sleeve, air pump, brush
Good Use reiner chemischer Epoxidanker ist ideal für die tiefe Einbettung und die Installation in großen Löchern
- Heavy duty loading
- Great chemical resistance
- Ideal for deep embedment and diamond drilled holes
- Provide longer working time
- No shrinkage
- More efficient to use bigger cartridge capacity to save time for changing new cartridges
- Styrene free, low odor, and LEED tested for VOC (Volatile Organic Compounds)
- No health or safety concern to slow down your work
Alle chemischen Anker von Good Use wurden im IWB-Labor in Deutschland einem Dauerbelastungstest unterzogen
There is no qualified lab with equipment for testing bonding anchor according ETA regulations in Asia. All our items are tested by EAD 330499-00-0601 which is comprehensive plan for both of rebar and threaded rods. We cooperate and consult with leading experts in Europe who dedicate in the fasteners field for more than two decades. We keep improving our research capacity and upgrade international approvals of chemical anchor.
Anchoring hole depth checking
Sustained loads tested in IWB
Displacement testing under seismic
Reines Epoxid für große Projekte im Bauwesen
Excellent strength epoxy material is most requested by large constructions. The demand is growing as more concerns on anchoring secure and human errors. As advanced capability for rod and rebar doweling in concrete, epoxy anchoring is large consumption at building projects. Bigger volume saves more time to change new cartridges and more efficient.
Epoxy injection mortar with high strength for big construction sites
GU-500 pure epoxy 1:1 650ml cartridge
Stärkste Epoxidverankerung für alle Befestigungslösungen
Non-drip formula, ideal for overhead installation and suspension anchorage. Versatile and multi-purpose pure epoxy is longer curing time and more flexible on applications. As global warming, climate suitability and wide temperature applicability are important for chemical anchor development. We equip temperature facilities to simulate different anchoring temperature worldwide and do multiple testing to ensure the quality. The steady characteristic of epoxy is most used in tropical zone.
Non-sag formula good for horizontal application
Oven testing for resistance to high temperature
Technical Data
CHART 1. SOLID SUBSTRATE REBAR INSTALLATION DETAILS
| Pressure | Destroy Haul Strength (Kgf/KN) | Safety Haul Strength (Kgf/KN) | Working Standard (mm) | ||||||
| Concrete Strength | 4,000 psi | 280 kg/cm2 | 4,000 psi | 280 kg/cm2 | Hole Diameter | Hole Depth | |||
| Rebar No. | ＃3 | (Φ10) | 3,607 | 36.4 | 1,202 | 12.1 | 13 | 90 | |
| ＃4 | (Φ12) | 6,409 | 64.7 | 2,136 | 21.6 | 16 | 125 | ||
| ＃5 | (Φ16) | 9,695 | 97.9 | 3,232 | 32.6 | 20 | 145 | ||
| ＃6 | (Φ20) | 13,655 | 137.9 | 4,552 | 46.0 | 25 | 170 | ||
| ＃7 | (Φ22) | 18,672 | 188.6 | 6,224 | 62.9 | 28 | 200 | ||
| ＃8 | (Φ25) | 24,032 | 242.7 | 8,011 | 80.9 | 32 | 225 | ||
| ＃9 | (Φ28) | 27,364 | 276.4 | 9,121 | 92.1 | 37 | 260 | ||
| ＃10 | (Φ32) | 31,730 | 320.5 | 10,577 | 106.8 | 40 | 290 | ||
| ＃11 | (Φ36) | 35,843 | 362.1 | 11,948 | 120.7 | 42 | 320 | ||
| Remarks: | 1. Concrete Strength fc': 280kg/cm2 (4,000 psi) 2. Rebar Strength: #3~#5 fy: 2,800 kgf/cm2, #6~#11 fy= 4,200 kgf/cm2 | ||||||||
CHART 2. CURING TIME TABLE
| Temperature (°C) | Gelling | Full Curing |
| 5~10 | 1-2 hr. | 90 - 100 hr. |
| 10~20 | 30-60 min. | 30 - 60 hr. |
| 20~30 | 14-30 min. | 14 - 22 hr. |
| 30~40 | 10-20 min. | 6 - 12 hr. |
| Please make pull off test for at least 24 hours after full cured. | ||
CHART 3. FIXING CONSUMPTION PER CARTRIDGE
| Anchor Size | Hole Diameter (mm) | Hole Depth (mm) | Number of Fixings |
| 650ml | |||
| M8 | 10 | 80 | 126 |
| M10 | 13 | 90 | 75 |
| M12 | 16 | 120 | 33 |
| M16 | 20 | 145 | 17 |
| M20 | 25 | 170 | 9 |
| M24 | 28 | 210 | 6 |
| M30 | 35 | 270 | 3 |
| M36 | 40 | 330 | 1 |
| Note: Based on continuous installation without interruptions or nozzle changes. Provided as a guide and will vary with temperature. | |||
Das Geheimnis des Extrudierens von 600/650-ml-Kartuschen – ziehen Sie den Abzug mit einem Rhythmus
600ml/650ml side by side tube is quite big and contains a lot of resin mortar inside. Please pump the resin mortar out from the tube slowly just to allow the resin mortar flowing out from the opening of the tube. Don't pull the trigger too fast. While pumping too fast, the mortar cannot make it to flow out from the opening of the tube, the pumping pressure will force some mortar coming out from the back plunger or cause the caulking gun stuck. So, in order to have the best performance, please pump the mortar slowly with a rhythm. Don't pump too fast suddenly. While using electrical cordless caulking gun, also please notice the pumping speed.
- Related Products
400ml Tropical Epoxy Chemical Anchor
GU-500 400ml 3:1
400 ml chemischer Epoxidanker ist eine injizierbare 3: 1-Kartusche für Bewehrungsverbindungen...
Einzelheiten
Epoxy Chemical Anchor For Varying Weather
GU-500SD 400ml 3:1
GU-500SD 400ml is strongest in all chemical anchoring. Remarkable at cold weather, cracked...
Einzelheiten
High Strength Epoxy For Concrete Mounting System
GU-500SD 400ml 3:1
High strength epoxy anchoring for aluminum solar panel concrete mounting system. Top-quality...
Einzelheiten
Hochleistungs-Kartuschenpistole mit 650 ml Doppelkartusche
#217
Zweikomponenten-Dispenser Nr. 217 ist für 1:1 600/650 ml Side-by-Side-Kartuschen. Einfache...
Einzelheiten
Hochleistungs-Kartuschenpistole mit 650 ml Doppelkartusche
HC7-600
Die schwere Kartuschenpistole mit 600 ml / 650 ml Epoxidkartusche ist für professionelle Anforderungen...
Einzelheiten
Mixing nozzle for 1:1 and 3:1 chemical anchor
#818
Static mixer nozzles are applied to adhesive cartridges to mix and dispense two component adhesives....
Einzelheiten- Files Download
Pure Epoxy Catalogue
Bonding strength table on dry concrete by different hole sizes and depth. Especially for big diameter rebars/threaded rods.
DownloadGU-500 650ml Pure Epoxy Technical Data Sheet
Technical information of anchor design, curing time, edge distance, consumption per hole and installation procedure for GU-500 pure epoxy.
DownloadGU-500 SGS Tensile Strength Testing Report
Pire epoxy pull out strength report for various bolt sizes on 4000psi concrete according to ASTM E488-96 by SGS lab.
DownloadGU-500 AIT Tensile Strength Diameter of 25mm
Pure epoxy tensile test report of rebar fixing for 25mm hole size by Thailand AIT engineering lab. According to local market demands, our products will...
DownloadGU-500 AIT Tensile Strength Diameter of 16mm
Pure epoxy tensile test report of rebar fixing for 16mm hole size by Thailand AIT engineering lab. According to local market demands, our products will...
Download- Gun Installation Guide
1~3. Entfernen Sie die Schraubkappe und den Stopfen der aufschraubbaren Mischdüse.
4. Legen Sie die Kartusche in die Kartuschenpistole. Achten Sie darauf, die Patrone in der richtigen Position einzusetzen. Der Kolben der Kartuschenpistole befindet sich in der Mitte der Kartuschenkolben.
5. Ungemischtes Harz auspressen.
- Gallery
650ml 1:1 Kartusche chemisches Epoxidharz
Chemische Verankerung in 650 ml Injektionskartusche
Epoxy-Anker nebeneinander Kartusche für schwere Lasten
Hochbelastbares Epoxidharz für die strukturelle Betonverankerung
Gute Verwendung E-Katalog
Finden Sie unseren vollständigen Katalog des chemischen Verankerungssortiments
Download Popular Products
High Temperature Epoxy Anchoring | Chemical Anchor Manufacturer - Good Use
Good Use Hardware Co., Ltd. is one of prime High Temperature Epoxy Anchoring | chemical anchors suppliers based in Taiwan since 1997.
Certified chemical anchor solutions with wide selections of adhesive materials including epoxy anchors, concrete anchors, resin anchors for heavy loads in rebar application, diamond drilled holes and anchoring in solid concrete. Non-drip formula, ideal for overhead installation. Chemical anchor bolt and anchor fixings included for efficient, hassle-free, labor-saving chemical anchoring.
Good Use has been offering customers certified tested high-quality chemical anchors. Both with advanced technology and 20 years of experience, Good Use ensures each customer's demands are met.