345ml anchor system epoxy acrylate chemical anchor | Chemical Anchor Manufacturer - Good Use
Good Use Hardware Co., Ltd. is one of prime 345ml anchor system epoxy acrylate chemical anchor | chemical anchors suppliers based in Taiwan since 1997. Certified chemical anchor solutions with wide selections of adhesive materials including epoxy anchors, concrete anchors, resin anchors for heavy loads in rebar application, diamond drilled holes and anchoring in solid concrete. Non-drip formula, ideal for overhead installation. Chemical anchor bolt and anchor fixings included for efficient, hassle-free, labor-saving chemical anchoring. 345ml bonded resin is popular middle size for most construction consumption. Epoxy acrylate is high chemical resistance material for specific anchoring environment. GU-600 injection bonded resin is middle to heavy strength for extensive loads requirements. All of our products had tested and approved in Germany according to EAD 330499-00-0601 which is norm of bonded fasteners for use in concrete. There are also 150ml, 235ml, 360ml and 380ml available in the range.
345ml anchor system epoxy acrylate chemical anchor
GU-600 345ml
Cartridge tube resin anchor bolt
345ml bonded resin is popular middle size for most construction consumption. Epoxy acrylate is high chemical resistance material for specific anchoring environment.
GU-600 injection bonded resin is middle to heavy strength for extensive loads requirements. All of our products had tested and approved in Germany according to EAD 330499-00-0601 which is norm of bonded fasteners for use in concrete. There are also 150ml, 235ml, 360ml and 380ml available in the range.
Chemical fixing system - Acid and alkali-resisting epoxy acrylate chemical anchor
For anchoring structural steel connections at specific environment of acid and alkali. We will suggest to apply GU-600 Epoxy acrylate with styrene or GU-2000 without styrene. All of our injectable cartridge mortar tested in European lab to approval the performance on structural connections with post-installed rebar and threaded anchor.
Specification of GU-600 epoxy acrylate chemical anchor
- Material: Epoxy Acrylate with styrene
- Model Number: GU-600
- Size: 345ml
- Shelf Life: 18 months
- Mixing Ratio: 10:1
- Mixed Color: Gray
- Standard Package: One cartridge with one mixer
- Other Accessory: Mixer, caulking gun, nylon sleeve, air pump, brush
Good Use epoxy acrylate chemical anchor is non-flammable adhesive
- Medium heavy load and easy to use
- High resistance to acid and alkali
- Non-flammable and suitable for dry fastening
- Use with 345ml caulking gun
- Cartridge reusable by simply exchanging static mixer
All Good Use chemical anchors have done sustained loads test at IWB lab in Germany
Tidak ada lab yang memenuhi syarat dengan peralatan untuk menguji bonding anchor menurut peraturan ETA di Asia. Semua barang kami diuji oleh EAD 330499-00-0601 yang merupakan rencana komprehensif untuk rebar dan batang berulir. Kami bekerja sama dan berkonsultasi dengan para ahli terkemuka di Eropa yang mendedikasikan diri di bidang pengencang selama lebih dari dua dekade. Kami terus meningkatkan kapasitas penelitian kami dan meningkatkan persetujuan internasional untuk jangkar kimia.
Pemeriksaan kedalaman lubang penahan
Beban berkelanjutan diuji di IWB
Pengujian perpindahan di bawah seismik
Injection epoxy acrylate bonding agent for overhead installations
GU-600 epoxy acrylate bonding adhesive is high performance anchoring system for fixing and fastening in concrete, stone, and hollow bricks. 345ml epoxy acrylate based non sag adhesive is easy to extrude and to inject. It is perfect for applied in vertical and horizontal direction, such like projecting roofs, facades, air conditioner support bracket, bathroom fittings, and crack and gap filling repairs in concrete.
Non sag epoxy anchor vertical and horizontal installation
High bonding injection epoxy adhesive for overhead application
Technical Data
CHART 1. SOLID SUBSTRATE REBAR INSTALLATION DETAILS
| Pressure | Destroy Haul Strength (Kgf/KN) | Safety Haul Strength (Kgf/KN) | Working Standard (mm) | ||||||
| Concrete Strength | 4,000 psi | 280 kg/cm2 | 4,000 psi | 280 kg/cm2 | Hole Diameter | Hole Depth | |||
| Rebar No. | ＃3 | (Φ10) | 3,530 | 35.7 | 1,177 | 11.9 | 13 | 90 | |
| ＃4 | (Φ13) | 5,490 | 55.5 | 1,830 | 18.5 | 16 | 120 | ||
| ＃5 | (Φ16) | 9,070 | 91.6 | 3,023 | 30.5 | 20 | 145 | ||
| ＃6 | (Φ19) | 14,140 | 142.8 | 4,713 | 47.6 | 25 | 170 | ||
| ＃7 | (Φ22) | 18,620 | 188.1 | 6,207 | 62.7 | 28 | 200 | ||
| ＃8 | (Φ25) | 23,185 | 234.2 | 7,728 | 78.1 | 32 | 225 | ||
| ＃9 | (Φ29) | 25,350 | 256.1 | 8,450 | 85.4 | 37 | 250 | ||
| ＃10 | (Φ32) | 32,190 | 325.2 | 10,730 | 108.4 | 40 | 290 | ||
| Remarks: | 1. Concrete Strength fc': 280kg/cm2 (4,000 psi) 2. Rebar Strength: #3~#5 fy: 2,800 kgf/cm2, #6~#11 fy= 4,200 kgf/cm2 | ||||||||
CHART 2. CURING TIME TABLE
| Temperature (°C) | Gelling | Full Curing |
| 0~5 | 6 hr. | |
| 5~10 | 30 min. | 5 hr. |
| 10~20 | 20 min. | 4 hr. |
| 20~30 | 10 min. | 2 hr. |
| 30~40 | 5 min. | 40 min. |
| Please make pull off test for at least 24 hours after full cured. | ||
CHART 3. FIXING CONSUMPTION PER CARTRIDGE
| Anchor Size | Hole Diameter (mm) | Hole Depth (mm) | Number of Fixings | ||||
| 150ml | 235ml | 345ml | 360ml | 380ml | |||
| M8 | 10 | 80 | 30 | 47 | 69 | 72 | 76 |
| M10 | 12 | 90 | 18 | 29 | 42 | 44 | 47 |
| M12 | 14 | 110 | 11 | 17 | 25 | 27 | 28 |
| M16 | 18 | 125 | 6 | 9 | 14 | 14 | 15 |
| M20 | 24 | 170 | 2 | 4 | 6 | 6 | 6 |
| M24 | 28 | 210 | 1 | 2 | 3 | 4 | 4 |
| M30 | 35 | 270 | 1 | 1 | 2 | 2 | 2 |
| M36 | 40 | 330 | X | 1 | 1 | 1 | 1 |
| Note: Based on continuous installation without interruptions or nozzle changes. Provided as a guide and will vary with temperature. | |||||||
How to install chemical anchor?
1. Drill the specific hole size and depth. 2. Clean dust with brush and air blow pump. 3. Press out unmixed resin which can't be used. 4. Inject mixed resin into drilled hole and fill from the bottom. 5. Insert rebar/threaded rod/steel strip. Curing time refer to TDS. Don't touch until full curing. The installation process will affect the bonding performance of chemical anchors.
- Related Products
345ml anchoring system polyester chemical anchor
GU-100 345ml
345ml polyester chemical anchor is middle size and more flexible in market. It needs a specific...
rincian
345ml injectable vinylester chemical anchor
GU-2000 345ml
Approved vinylester mortar is for fixing threaded rod and rebar on non-cracked concrete for structure...
rincian
150ml anchor system epoxy acrylate chemical anchor
GU-600 150ml
Single tube 150ml is a good option for DIY. Epoxy acrylate is easy installed and economical...
rincian
235ml anchor system epoxy acrylate chemical anchor
GU-600 235ml
235ml is small volume and good for home DIY with quick setting time. It is convenient to operate...
rincian
360ml anchor system epoxy acrylate chemical anchor
GU-600 360ml
Epoxy acrylate 360ml is best-selling item for general fixations to reinforcement projects....
rincian
380ml anchor system epoxy acrylate chemical anchor
GU-600 380ml
380ml is coaxial cartridge design required special dispensing tool. Also called 400ml or 410ml...
rincian
360ml pistol mendempul dua komponen
#811N
#811N is multi compatible dispenser for 300/345/360ml adhesive cartridge and some customers...
rincian
Mixing nozzle for 10:1 chemical anchor
#817
Mixing nozzle is designed to mix and dispense two-component chemical anchor at the same time....
rincian- Files Download
Epoxy Acrylate with Styrene Catalogue
Bonding strength chart on dry concrete by different hole size and depth. Epoxy acrylate for all fixing demands.
UnduhGU-600 Epoxy Acrylate with Styrene Technical Data Sheet
Technical information of anchor design, curing time, edge distance, consumption per hole and installation procedure.
UnduhGU-600 SGS Tensile Strength Testing Report
Epoxy acrylate pull out strength report for diverse bolt size on 4000psi concrete according to ASTM E488-96 by SGS lab.
UnduhGU-600 AIT Tensile Strength Diameter of 25mm
Epoxy acrylate tensile test report of rebar fixing for 25mm hole size by Thailand AIT engineering lab. According to local market demands, our products...
UnduhGU-600 AIT Tensile Strength Diameter of 16mm
Epoxy acrylate tensile test report of rebar fixing for 16mm hole size by Thailand AIT engineering lab. According to local market demands, our products...
Unduh- Gun Installation Guide
1) Caulking gun for 345ml injection cartridge. 2. Remove the screw cap. 
3) Screw on mixer nollze. 4) Put the cartridge into the caulking gun and start construction. 
- Galeri
345ml cartridge chemical epoxy acrylate styrene
345ml injection cartridge chemical anchor tube
345ml side by side resin anchor cartridge
345ml polyester, epoxy acrylate, vinylester styrene free
Epoxy acrylate acid and alkali resistance for concrete reinforcing steel
Unduh Produk Populer
345ml anchor system epoxy acrylate chemical anchor | Chemical Anchor Manufacturer - Good Use
Good Use Hardware Co., Ltd. is one of prime 345ml anchor system epoxy acrylate chemical anchor | chemical anchors suppliers based in Taiwan since 1997.
Certified chemical anchor solutions with wide selections of adhesive materials including epoxy anchors, concrete anchors, resin anchors for heavy loads in rebar application, diamond drilled holes and anchoring in solid concrete. Non-drip formula, ideal for overhead installation. Chemical anchor bolt and anchor fixings included for efficient, hassle-free, labor-saving chemical anchoring.
Good Use has been offering customers certified tested high-quality chemical anchors. Both with advanced technology and 20 years of experience, Good Use ensures each customer's demands are met.