Ancorante chimico per il fissaggio di gradini e sbarre
Corrosion resistance injection epoxy mortar for manhole steps anchoring
Manhole steps is commonly used in sanitary sewer that required corrosion resistance and high impact grade. Some manhole steps are hammered into preformed holes in concrete structures, and some are fixed by chemical anchor adhesive. Corrosion protection and strength are the most critical factors when selecting the manhole steps, so are secure fixing. In Good use hardware’s chemical anchor series, GU-2000 vinylester hybrid mortar and GU-500 injection epoxy adhesive are both suitable for corrosive environment.
Chemical resistance anchoring epoxy adhesive for acid and alkali environments
Our Saudi Arabian client used GU-500 epoxy mortar to fix the manhole steps. They considered epoxy mortar provides stronger bonding strength than wall anchors and epoxy mortar is suitable for most tough conditions. Even directly hammered the manhole steps into the drilled holes, the holes must be made accurately, if too large, the steps will not be well fixed and must be filled with chemical mortar. To save time and have a securely hold manhole steps, using chemical anchor for the installation is a great choice.
Epoxy for fixing manhole steps in wastewater sewer(Figure from Iverna)
Anchor bolt epoxy for manhole rungs fixing
Corrosion resistant epoxy adhesive for fixing step rungs in sewage
Injection epoxy for anchoring rod on water saturated concrete
Epoxy chemical anchoring for wet concrete
Strength test of epoxy chemical anchor on wet concrete
- Related Products
High Strength Epoxy For Concrete Mounting System
GU-500SD 400ml 3:1
High strength epoxy anchoring for aluminum solar panel concrete mounting system. Top-quality epoxy can sustain under high heat and heavy loading. Ultimate...
Particolari
Epoxy Chemical Anchor For Varying Weather
GU-500SD 400ml 3:1
GU-500SD 400ml is strongest in all chemical anchoring. Remarkable at cold weather, cracked concrete and water saturated holes. Ultimate performance...
Particolari
High Temperature Epoxy Anchoring
GU-500 650ml 1:1
1:1 ratio 650ml epoxy base injection mortar for anchoring projects in high temperature country. Two components pure epoxy summer epoxy adhesive is styrene...
Particolari
400ml Tropical Epoxy Chemical Anchor
GU-500 400ml 3:1
400ml epoxy chemical anchor is 3:1 injectable cartridge for rebar connections and heavy anchoring. Suitable for construction in tropical or summer. Epoxy...
Particolari