Chemical Anchor For Fastening Manhole Steps And Hand Bars

Chemical Anchor For Fastening Manhole Steps And Hand Bars - Corrosion resistance injection epoxy mortar for manhole steps anchoring | Made in Taiwan Injectable Adhesive Mortars Manufacturer for 20 Years | Good Use

Good Use Hardware Co., Ltd. is a Chemical Anchor For Fastening Manhole Steps And Hand Bars - Corrosion resistance injection epoxy mortar for manhole steps anchoring - manufacturer based in Taiwan since 1997. Manhole steps is commonly used in sanitary sewer that required corrosion resistance and high impact grade. Some manhole steps are hammered into preformed holes in concrete structures, and some are fixed by chemical anchor adhesive. Corrosion protection and strength are the most critical factors when selecting the manhole steps, so are secure fixing. In Good use hardware’s chemical anchor series, GU-2000 vinylester hybrid mortar and GU-500 injection epoxy adhesive are both suitable for corrosive environment. Certified chemical anchor solutions with wide selections of adhesive materials including epoxy anchors, concrete anchors, resin anchors for heavy loads in rebar application, diamond drilled holes and anchoring in solid concrete. Non-drip formula, ideal for overhead installation. Chemical anchor bolt and anchor fixings included for efficient, hassle-free, labor-saving chemical anchoring.

Two component epoxy mortar for anchoring manhole step

Corrosion resistance injection epoxy mortar for manhole steps anchoring

Manhole steps is commonly used in sanitary sewer that required corrosion resistance and high impact grade. Some manhole steps are hammered into preformed holes in concrete structures, and some are fixed by chemical anchor adhesive. Corrosion protection and strength are the most critical factors when selecting the manhole steps, so are secure fixing. In Good use hardware’s chemical anchor series, GU-2000 vinylester hybrid mortar and GU-500 injection epoxy adhesive are both suitable for corrosive environment.

Chemical resistance anchoring epoxy adhesive for acid and alkali environments

Our Saudi Arabian client used GU-500 epoxy mortar to fix the manhole steps. They considered epoxy mortar provides stronger bonding strength than wall anchors and epoxy mortar is suitable for most tough conditions. Even directly hammered the manhole steps into the drilled holes, the holes must be made accurately, if too large, the steps will not be well fixed and must be filled with chemical mortar. To save time and have a securely hold manhole steps, using chemical anchor for the installation is a great choice.

Related Products: ETA approved high-strength epoxy chemical anchor for concrete mounting systems
GU-500SD 585ml 3:1

GU-500SD is our ETA-approved, high-performance pure epoxy anchoring solution, specifically engineered for demanding structural applications. Certified...
Details

ETA approved injection epoxy chemical anchor designed for dowel bar retrofitting
GU-500SD 400ml 3:1

GU-500SD pure epoxy chemical anchor has successfully received the European Technical Assessment report ETA-24/0928, confirming its high performance and reliability...
Details

650ml Epoxy anchoring adhesive for high-temperature installations
GU-500 650ml 1:1

This 650ml, 1:1 ratio, slow-cure epoxy-based injection mortar is ideal for anchoring projects in high-temperature environments. The two-component pure...
Details

400ml Epoxy chemical anchor designed for use in tropical weather conditions
GU-500 400ml 3:1

This 400ml epoxy chemical anchor, in a 3:1 injectable cartridge, is designed for rebar connections and heavy-duty anchoring. It's especially suitable for construction...
Details

Located in Taiwan since 1997, Good Use Hardware Co., Ltd. has been an injectable adhesive mortars and anchors manufacturer. Their main products, including Chemical Anchor For Fastening Manhole Steps And Hand Bars, injection cartridges, chemical mortars, chemical anchors, anchor capsules, polyester resins and vinylester resins, which are sold in 40 countries.

Reputable factory of chemical anchor in Taiwan produces the widest range of adhesive anchor solutions for your concrete anchoring applications. with more than 15 years manufacturing experience for Chemical Anchor System, Injection Cartridge System, Construction Chemical Mortar and more. Certified chemical anchor solutions with wide selections of adhesive materials including epoxy anchors, concrete anchors, resin anchors for heavy loads in rebar application, diamond drilled holes and anchoring in solid concrete. Non-drip formula, ideal for overhead installation. Chemical anchor bolt and anchor fixings included for efficient, hassle-free, labor-saving chemical anchoring.

Good Use has been offering customers certified and tested high-quality chemical anchors, both with advanced technology and 25 years of experience, Good Use ensures each customer's demands are met.

Chemical Anchor For Fastening Manhole Steps And Hand Bars - Corrosion resistance injection epoxy mortar for manhole steps anchoring | Made in Taiwan Injectable Adhesive Mortars Manufacturer for 20 Years | Good Use

Chemical Anchor For Fastening Manhole Steps And Hand Bars | Made in Taiwan Injectable Adhesive Mortars Manufacturer for 20 Years | Good Use

Two component epoxy mortar for anchoring manhole step / An injectable chemical anchor factory has been established in Taiwan, boasting more than 28 years of experience in manufacturing chemical anchor (injection mortar) and exporting to more than 45 countries.