150ml anchor system epoxy acrylate chemical anchor

150ml anchor system epoxy acrylate chemical anchor

GU-600 150ml

Single cartridge chemical anchoring adhesive

Single tube 150ml is a good option for DIY. Epoxy acrylate is easy installed and economical as the cartridge can be applied by standard silicone gun.

GU-600 injection bonded resin is middle to heavy strength for extensive loads requirements. All of our products had tested and approved in Germany according to EAD 330499-00-0601 which is norm of bonded fasteners for use in concrete. There are also 235ml, 345ml, 360ml and 380ml available in the range.

Chemical fixing system - Acid and alkali-resisting epoxy acrylate chemical anchor

For anchoring structural steel connections at specific environment of acid and alkali. We will suggest to apply GU-600 Epoxy acrylate with styrene or GU-2000 without styrene. All of our injectable cartridge mortar tested in European lab to approval the performance on structural connections with post-installed rebar and threaded anchor.



Specification of GU-600 epoxy acrylate chemical anchor

  • Material: Epoxy Acrylate with styrene
  • Model Number: GU-600
  • Size: 150ml
  • Shelf Life: 18 months
  • Mixing Ratio: 10:1
  • Mixed Color: Gray
  • Standard Package: One cartridge with one mixer
  • Other Accessory: Mixer, caulking gun, nylon sleeve, air pump, brush

Good Use epoxy acrylate chemical anchor has good resistance to acid and alkali

  • Medium heavy load and economical choice
  • Easy and quick to use and less wastage
  • Good resistance to acid and alkali and low VOC
  • Available to use with silicone sealant gun
  • Cartridge reusable by simply exchanging static mixer

All Good Use chemical anchors have done sustained loads test at IWB lab in Germany

There is no qualified lab with equipment for testing bonding anchor according ETA regulations in Asia. All our items are tested by EAD 330499-00-0601 which is comprehensive plan for both of rebar and threaded rods. We cooperate and consult with leading experts in Europe who dedicate in the fasteners field for more than two decades. We keep improving our research capacity and upgrade international approvals of chemical anchor.

Epoxy acrylate bonded anchor for corrosive environments

GU-600 injection bonded anchor is a formulation derived from epoxy acrylate resin with high bonding strength and good chemical resistance to acid and alkali. 150ml small volume two component injection epoxy acrylate adhesive is economical and very convenient for installation. Developed mainly to anchor threaded rods, steel columns, reinforcement bars into concrete, masonry at residential, commercial, and industrial sites. With our special cartridge design, it can be used with the push tube or regular silicone gun. No special tool is required.

Technical Data

CHART 1. SOLID SUBSTRATE REBAR INSTALLATION DETAILS

PressureDestroy Haul Strength (Kgf/KN)Safety Haul Strength (Kgf/KN)Working Standard (mm)
Concrete Strength4,000 psi280 kg/cm24,000 psi280 kg/cm2Hole DiameterHole Depth
Rebar No.#3(Φ10)3,62236.61,20712.21390
#4(Φ12)6,43765.02,14621.716125
#5(Φ16)9,73798.43,24632.820145
#6(Φ20)13,715138.54,57246.225170
#7(Φ22)18,754189.46,21563.128200
#8(Φ25)24,137243.88,04681.332225
#9(Φ28)27,484277.69,16192.537260
10(Φ32)31,869321.910,623107.340290
11(Φ36)36,000363.612,000121.242320
Remarks:1. Concrete Strength fc': 280kg/cm2 (4,000 psi)
2. Rebar Strength: #3~#5 fy: 2,800 kgf/cm2, #6~#11 fy= 4,200 kgf/cm2

CHART 2. CURING TIME TABLE

Temperature (°C)GellingFull Curing
5~92 hr.90 hr.
10~1490 min.64 hr.
15~1945 min.28 hr.
20~2930 min.18 hr.
30~3920 min.7 hr.
4012 min.5 hr.
Please make pull out test over 24 hours after full cured.

CHART 3. FIXING CONSUMPTION PER CARTRIDGE

Anchor SizeHole Diameter
(mm)
Hole Depth
(mm)
Number of Fixings
400ml
M8108080
M10139042
M121612021
M162014511
M20251706
M24282104
M30352702
M36403301
Note: Based on continuous installation without interruptions or nozzle changes. Provided as a guide and will vary with temperature.

How to install chemical anchor?

1. Drill the specific hole size and depth. 2. Clean dust with brush and air blow pump. 3. Press out unmixed resin which can't be used. 4. Inject mixed resin into drilled hole and fill from the bottom. 5. Insert rebar/threaded rod/steel strip. Curing time refer to TDS. Don't touch until full curing. The installation process will affect the bonding performance of chemical anchors.



Related Products
  • 150ml anchoring system polyester chemical anchor - 150ml silicone gun tube polyester bonded anchor
    150ml anchoring system polyester chemical anchor
    GU-100 150ml

    150ml polyester chemical anchor is the smallest volume in the range. It is available to work with ordinary silicone gun, no special extrusion tools required.Polyester with styrene chemical anchor is classic and most popular material for general purpose. Economical price satisfies most fixing demands of medium loads. Applicable for rebar doweling, handrail, facade, pipelines, awnings, brackets. All of our chemical anchor had tested and approved in Germany according to EAD 330499-00-0601. There are also 235ml, 345ml, 360ml and 380ml available in the range.


  • 150ml injectable vinylester chemical anchor - GU-2000 150ml Vinyl ester styrene free, injection mortar suitable for silicon gun
    150ml injectable vinylester chemical anchor
    GU-2000 150ml

    150ml vinylester injection glue anchor is design for DIY fixing market. It’s very suitable house repair and building fixing project.A two-component 10:1 resin chemical anchoring injection system. Convenient setting and fast curing in low temperature. It is environmentally friendly item without styrene. All of our products had tested and approved in Germany according to EAD 330499-00-0601. There are also 235ml, 345ml, 360ml and 380ml for diverse market preference.


  • 235ml anchor system epoxy acrylate chemical anchor - 235ml epoxy acrylate resin
    235ml anchor system epoxy acrylate chemical anchor
    GU-600 235ml

    235ml is small volume and good for home DIY with quick setting time. It is convenient to operate the bonded anchor system and best selling at hardware store or online shop.GU-600 injection bonded resin is middle to heavy strength for extensive loads requirements. All of our products had tested and approved in Germany according to EAD 330499-00-0601 which is norm of bonded fasteners for use in concrete. There are also 150ml, 345ml, 360ml and 380ml available in the range.


  • 345ml anchor system epoxy acrylate chemical anchor - 345ml epoxy acrylate resin
    345ml anchor system epoxy acrylate chemical anchor
    GU-600 345ml

    345ml bonded resin is popular middle size for most construction consumption. Epoxy acrylate is high chemical resistance material for specific anchoring environment.GU-600 injection bonded resin is middle to heavy strength for extensive loads requirements. All of our products had tested and approved in Germany according to EAD 330499-00-0601 which is norm of bonded fasteners for use in concrete. There are also 150ml, 235ml, 360ml and 380ml available in the range.


  • 360ml anchor system epoxy acrylate chemical anchor - 360ml epoxy acrylate resin
    360ml anchor system epoxy acrylate chemical anchor
    GU-600 360ml

    Epoxy acrylate 360ml is best-selling item for general fixations to reinforcement projects. With chemical resistance feature and fast hardening characteristic.GU-600 injection bonded resin is middle to heavy strength for extensive loads requirements. All of our products had tested and approved in Germany according to EAD 330499-00-0601 which is norm of bonded fasteners for use in concrete. There are also 150ml, 235ml, 345ml and 380ml available in the range.


  • 380ml anchor system epoxy acrylate chemical anchor - 380ml epoxy acrylate resin
    380ml anchor system epoxy acrylate chemical anchor
    GU-600 380ml

    380ml is coaxial cartridge design required special dispensing tool. Also called 400ml or 410ml in the market which can be filled different formula.GU-600 injection bonded resin is middle to heavy strength for extensive loads requirements. All of our products had tested and approved in Germany according to EAD 330499-00-0601 which is norm of bonded fasteners for use in concrete. There are also 150ml, 235ml, 345ml and 380ml available in the range.


  • 300ml silicone sealant gun - Silicone sealant gun
    300ml silicone sealant gun
    #215-AN

    #215-AN is 1-component and 2-component manual dispenser designed with U-opening steel frame, Ladder hook puller, Pressure Relief Device and Heat treatment steel push plates and rod. High quality and good price make it as polpular item for oversea market. There are other compatible 300ml caulking gun like #215-IHR, P4-P01D, #811N.


  • 300ml silicone glue gun - Silicone caulking gun
    300ml silicone glue gun
    #215-IHR

    #215-IHR is a lightweight and economical price adhesive dispenser. Excellent design with rotatable 360° frame and convenient ladder hook puller. The material is coated aluminum alloy and steel with heat treatment steel push plates and rod to make it powerful and highly durable. It is suitable with 150ml, 280ml, 300ml versatile adhesive cartridge and sealant. There are other compatible 300ml caulking gun like #215-AN, P4-P01D, #811N.


  • 360ml two component caulking gun - Best caulking gun - 811N
    360ml two component caulking gun
    #811N

    #811N is multi compatible dispenser for 300/345/360ml adhesive cartridge and some customers use it for 390ml epoxy tube. With heat treatment steel push plates and rod to make it powerful and highly durable. High value caulking gun with good price.


  • Mixing nozzle for 10:1 chemical anchor - Static mixer for 10:1 chemical anchor
    Mixing nozzle for 10:1 chemical anchor
    #817

    Mixing nozzle is designed to mix and dispense two-component chemical anchor at the same time. Attached mixing nozzle to a dual cartridge, the two parts of adhesive will combine and mix by the spiral part in the nozzle while dispensing. A good mixing nozzle helps to control the dispensing volume and produce less waste. #817 mixing nozzle is ideal for Good Use chemical anchor with 10:1 mixing ratio.


  • 150ml Empty Cartridge - 150ml Empty Cartridge
    150ml Empty Cartridge
    150ml

    150ml cartridge is single volume tube with lightweight and nylon material. Easy mixing for normal silicone application gun.



Files Download

Gun Installation Guide
1) Silicone gun for 150ml injection cartridge.2. Remove the screw cap.
silicone gunsilicone gun
3) Screw on mixer nollze.4) Put the cartridge into the caulking gun and start construction.
silicone gunSilicone gun
Gallery

Menu

Best Sale

150ml anchor system epoxy acrylate chemical anchor | Chemical Anchor Manufacturer - Good Use

Good Use Hardware Co., Ltd. is one of prime 150ml anchor system epoxy acrylate chemical anchor | chemical anchors suppliers based in Taiwan since 1997.

Certified chemical anchor solutions with wide selections of adhesive materials including epoxy anchors, concrete anchors, resin anchors for heavy loads in rebar application, diamond drilled holes and anchoring in solid concrete. Non-drip formula, ideal for overhead installation. Chemical anchor bolt and anchor fixings included for efficient, hassle-free, labor-saving chemical anchoring.

Good Use has been offering customers certified tested high-quality chemical anchors. Both with advanced technology and 20 years of experience, Good Use ensures each customer's demands are met.


Hot Products

Professional epoxy resin

Professional epoxy resin

Excellent bonding strength for rebar connections and extension anchoring. Bridges, civil structures, retrofitting.

Read More
High temperature epoxy resin

High temperature epoxy resin

Suitable working time for use in tropical climate. Fixing diamond drilled holes, deep embedment depths, large diameter rebar.

Read More
Winter concrete epoxy resin

Winter concrete epoxy resin

Special winter formula for anchoring at low temperature. For dry, wet, water saturated concrete.

Read More