150ml anchor system epoxy acrylate chemical anchor

GU-600 150ml

Single cartridge chemical anchoring adhesive

The 150ml single-tube epoxy acrylate chemical anchor is an excellent choice for DIY applications. It is easy to install and cost-effective, as the cartridge can be applied using a standard silicone gun.

The GU-600 injection-bonded resin offers medium to heavy strength, making it suitable for demanding load requirements. All of our products are tested and approved in Germany in accordance with EAD 330499-00-0601, the standard for bonded fasteners used in concrete.

In addition to the 150ml option, sizes of 235ml, 345ml, 360ml, and 380ml are also available in the range.

Inquire Now

Chemical Fixing System - Acid And Alkali-Resisting Epoxy Acrylate Chemical Anchor

Designed for anchoring structural steel connections in environments with high acid and alkali exposure, we recommend using the GU-600 Epoxy Acrylate with styrene or the GU-2000 without styrene. All of our injectable cartridge mortars have been rigorously tested in European laboratories to ensure optimal performance for structural connections involving post-installed rebar and threaded anchors.

Specification Of Epoxy Acrylate Chemical Anchor

● Material: Epoxy Acrylate with styrene
● Model Number: GU-600
● Capacity: 150ml
● Mixing Ratio: 10:1
● Mixed Color: Gray
● Shelf Life: 18 months
● Standard Package: One cartridge with one mixer
● Other Accessory: Mixer, caulking gun, nylon sleeve, air pump, brush

Epoxy acrylate chemical anchor has good resistance to acid and alkali

● Medium heavy load and economical choice
● Easy and quick to use and less wastage
● Good resistance to acid and alkali and low VOC
● Available to use with silicone sealant gun
● Cartridge reusable by simply exchanging static mixer

Epoxy acrylate bonded anchor for corrosive environments

GU-600 injection bonded anchor is a formulation derived from epoxy acrylate resin with high bonding strength and good chemical resistance to acid and alkali. 150ml small volume two component injection epoxy acrylate adhesive is economical and very convenient for installation. Developed mainly to anchor threaded rods, steel columns, reinforcement bars into concrete, masonry at residential, commercial, and industrial sites. With our special cartridge design, it can be used with the push tube or regular silicone gun. No special tool is required.

How to install a chemical anchor?

1. Drill the Hole: Drill the hole to the required diameter and depth as specified for the anchor installation. 2. Clean the Hole: Use a brush and air blow pump to thoroughly clean the hole, removing any dust or debris to ensure optimal bonding. 3. Remove Unmixed Mortar: Press out any unmixed mortar that cannot be used to ensure proper consistency when injecting the resin. 4. Inject the Mixed Mortar: Begin injecting the mixed mortar from the bottom of the drilled hole, filling it evenly. 5. Insert the Anchor: Insert and rotate the rebar, threaded rod, or steel strip into the drilled hole. Ensure the anchor is fully inserted without disturbing it until the resin has fully cured. Note: Avoid touching the inserted anchor until full curing is complete. Refer to our Technical Data Sheet (TDS) for specific curing times. Proper installation is crucial for maximizing the bonding performance of chemical anchors.

All Good Use Chemical Anchors - Qualified by IWB Lab in Germany and CSTB Lab in France

Currently, there are no authorized laboratories in Asia for testing bonding anchors under European Technical Assessment (ETA) regulations. All of our chemical anchors are rigorously tested in accordance with EAD 330087-01-6001 and EAD 330499-00-0601 standards for rebar and threaded rod fasteners. We collaborate closely with leading experts in Europe who have over two decades of experience in the fastener industry. Our ongoing commitment to research and development ensures continuous improvement in our products, as well as the upgrading of our international approvals for chemical anchors.

Technical Data

CHART 1. SOLID SUBSTRATE REBAR INSTALLATION DETAILS

Pressure			Destroy Haul Strength (Kgf/KN)		Safety Haul Strength (Kgf/KN)		Working Standard (mm)
Concrete Strength			4,000 psi	280 kg/cm2	4,000 psi	280 kg/cm2	Hole Diameter	Hole Depth
Rebar No.	＃3	(Φ10)	3,530	35.7	1,177	11.9	13	90
	＃4	(Φ13)	5,490	55.5	1,830	18.5	16	120
	＃5	(Φ16)	9,070	91.6	3,023	30.5	20	145
	＃6	(Φ19)	14,140	142.8	4,713	47.6	25	170
	＃7	(Φ22)	18,620	188.1	6,207	62.7	28	200
	＃8	(Φ25)	23,185	234.2	7,728	78.1	32	225
	＃9	(Φ29)	25,350	256.1	8,450	85.4	37	250
	＃10	(Φ32)	32,190	325.2	10,730	108.4	40	290
Remarks:	1. Concrete Strength fc': 280kg/cm2 (4,000 psi) 2. Rebar Strength: #3~#5 fy: 2,800 kgf/cm2, #6~#11 fy= 4,200 kgf/cm2

CHART 2. CURING TIME TABLE

Temperature (°C)	Gelling	Full Curing
0~5		6 hr.
5~10	30 min.	5 hr.
10~20	20 min.	4 hr.
20~30	10 min.	2 hr.
30~40	5 min.	40 min.
Please make pull off test for at least 24 hours after full cured.

CHART 3. FIXING CONSUMPTION PER CARTRIDGE

Anchor Size	Hole Diameter (mm)	Hole Depth (mm)	Number of Fixings
Anchor Size	Hole Diameter (mm)	Hole Depth (mm)	150ml	235ml	345ml	360ml	380ml
M8	10	80	30	47	69	72	76
M10	12	90	18	29	42	44	47
M12	14	110	11	17	25	27	28
M16	18	125	6	9	14	14	15
M20	24	170	2	4	6	6	6
M24	28	210	1	2	3	4	4
M30	35	270	1	1	2	2	2
M36	40	330	X	1	1	1	1
Note: Based on continuous installation without interruptions or nozzle changes. Provided as a guide and will vary with temperature.