360ml two component caulking gun
Manual adhesive dispensing tool
811N is a premium gun designed for the professional. Outfitted with a full sized handle for a comfortable grip and ultimate precision. For ease of use, it is equipped with hand action lever for dispensing control. There are various size and ratio of cartridges that required special caulking gun. We supply diverse chemical anchor cartridge.
Ratio 10:1 two parts chemical anchor caulking gun
345ml and 360ml chemical anchor is familiar volume. This caulking tool is used for 345ml, 360ml side by side cartridge as well as 150ml, 235ml cartridge. It's cost-efficient for wide glue size from consumer to commercial using.
- Item No.: #811N
- For 235ml/345ml/360ml side by side tube with ratio 10:1
- Color: Red
- Handle: Aluminum Alloy
- Trigger: Metal
- Carriage: Metal
- Suitable for Good Use 235ml/345ml/360ml cartridge of polyester resin, epoxy acrylaye and vinylester.
Features & Benefits
- Steady quality with competitive price
- Easy installation and operation
- Energy save design
- High quality for long-term using
- Press the trigger for short time pause or pulling out the steel arm
How to install chemical anchor?
1. Drill the specific hole size and depth. 2. Clean dust with brush and air blow pump. 3. Press out unmixed resin which can't be used. 4. Inject mixed resin into drilled hole and fill from the bottom. 5. Insert rebar/threaded rod/steel strip. Curing time refer to TDS. Don't touch until full curing. The installation process will affect the bonding performance of chemical anchors.
- 12pcs per carton
- Carton dimension: 37x31x27.5cm(H)
- N.W.: 13KGS
- G.W.: 13.5KGS
- Other packing requirements, please check with us.
- Related Products
Polyester with styrene chemical anchor is classic and most popular material for general purpose. Economical price satisfies most fixing demands of medium loads. Applicable for rebar doweling, handrail, facade, pipelines, awnings, brackets. Use with special caulking gun to extrude resin.235ml side by side small volume easy use for small area. There are 150ml, 345ml, 360ml and 380ml available for diverse market preference. All volume cartridge for fixings in non-cracked concrete, masonry, brick, stone, perforated brick.
Polyester with styrene chemical anchor is classic and most popular material for general purpose. Economical price satisfies most fixing demands of medium loads. Applicable for rebar doweling, handrail, facade, pipelines, awnings, brackets. Use with special caulking gun to extrude resin.345ml injection mortar is middle size and more flexible in market. There are 150ml, 235ml, 360ml and 380ml available for diverse market preference. All volume cartridge for fixings in non-cracked concrete, masonry, brick, stone, perforated brick.
Polyester with styrene chemical anchor is classic and most popular material for general purpose. Economical price satisfies most fixing demands of medium loads. Applicable for rebar doweling, handrail, facade, pipelines, awnings, brackets. Use with special caulking gun to extrude resin.360ml injection mortar is middle size and more flexible in market. There are 150ml, 235ml, 345ml and 380ml available for diverse market preference. All volume cartridge for fixings in non-cracked concrete, masonry, brick, stone, perforated brick.
Epoxy acrylate resin is high loads for medium. The cartridge is general 235ml volume. Convenient setting adhesive anchoring system with special caulking gun. Application with one action dispensing and two parts mixing through nozzle. Chemical anchors use to cracked concrete, reuse on small reinforced work.
Epoxy acrylate is high chemical resistance reinforcement rebar adhesive. No drip, low odor, Good chemical resistance. High performance injection mortar for solid and concrete supports. On-site easy mixing and use. Suitable for rods and reinforcing bars, concrete, natural stone, steel bar, aerated concrete.
A two component chemical anchoring injection system for epoxy acrylate resin. It has been developed as a good resistance chemical for high load and critical applications including structural steel, mechanical services, starter bars, etc.
GU-2000 235ml is a high performance, rapid curing two-part chemical anchoring system based on a high reactivity Vinyl ester. Applied in side by side action this resin will produce a strong, chemical resistant fixing.
The injection mortar GU-2000 has a range of test report under ETAG 001 Part 5 standard for non-cracked concrete for thread rod and rebar connections. The GU-2000 has an extended processing time that prevents the premature hardening of the mortar at different temperatures. It is ideally suited to large drill hole depths.
The Vinyl ester GU-2000 360ml is the most popular resin cartridge system. The fast curing in tropical grade making it convenient to use in guard rails, staircase, machines, awnings, gate and any hollow blocks made from concrete, stone or solid sand-lime brick.
The caulking gun is single tube type also available for silicone. Material is aluminum alloy handle and steel trigger. Easy hook for hanging the caulking gun on a ladder. Suitable for the following capacity 150ml and 280ml 10:1 of polyester resin, epoxy acrylate and vinylester.
This is a caulking gun designed for lightweight and economical price. The material for aluminum alloy and lightweight steel construction. Rotatable 360° frame. Convenient hook for hanging the caulking gun. It is suitable with 150ml, 280ml, 300ml general adhesive cartridge and sealant.
Professional grade 600ml sausage caulking gun 15 inch with smooth rod for longer dispensing tool. Aluminum alloy handle, trigger and carriage. Rotating barrel for maneuverability and easy caulk placement. Each one has a white nozzle. Use for doors and windows.
Single component applicator for sausage sealants, this gun is perfect for any general fixing. Made from high quality aluminum, handle for comfortable, adjustable output for precision controlled hole size. Easily press high viscosity materials.
User friendly, convenient swivel carriage. Cartridge guns feature a pull and cartridge puncture tool. Insert and fit cartridge into applicator gun. Apply silicone with a caulking gun in a continuous bead to the prepared joint. Increased durability and efficiency.
Single component applicator is short sausage gun. Suitable for 300ml cartridges capacity and sausage pistons prevent bag-wrap. Single component technology for long life. Attached puncture tool.
- Files Download
- Gun Installation Guide
- What is the difference between materials?
- What is the difference between cartridge volume?
- Styrene free v.s. with Styrene?
- Gelling time (working time) & full curing time (hardening time)?
- How does your factory do regarding quality control?
- Are you a manufacturer?
- How to store the injection cartridges? How is the shelf life?
- What can we do if the injection cartridge is not finished yet?
- Order & Payment
- Products Information
- Contact Us
360ml two component caulking gun | Chemical Anchor Manufacturer - Good Use
Good Use Hardware Co., Ltd. is one of prime 360ml two component caulking gun | chemical anchors suppliers based in Taiwan since 1997.
Certified chemical anchor solutions with wide selections of adhesive materials including epoxy anchors, concrete anchors, resin anchors for heavy loads in rebar application, diamond drilled holes and anchoring in solid concrete. Non-drip formula, ideal for overhead installation. Chemical anchor bolt and anchor fixings included for efficient, hassle-free, labor-saving chemical anchoring.
Good Use has been offering customers certified tested high-quality chemical anchors. Both with advanced technology and 20 years of experience, Good Use ensures each customer's demands are met.