380ml Heavy load epoxy acrylate chemical anchor for safety-critical fixing applications | Sold in 40 Countries Injectable Chemical Anchors Manufacturer Since 1997 | Good Use

380ml epoxy acrylate resin / An injectable chemical anchor factory has been established in Taiwan, boasting more than 28 years of experience in manufacturing chemical anchor (injection mortar) and exporting to more than 45 countries.

380ml Heavy load epoxy acrylate chemical anchor for safety-critical fixing applications - 380ml epoxy acrylate resin
  • 380ml Heavy load epoxy acrylate chemical anchor for safety-critical fixing applications - 380ml epoxy acrylate resin

380ml Heavy load epoxy acrylate chemical anchor for safety-critical fixing applications

GU-600 380ml

Concrete bonding anchor bolt epoxy

The 380ml epoxy acrylate chemical anchor comes in a coaxial cartridge design, requiring a special dispensing tool for application. It is also commonly referred to as a 400ml or 410ml cartridge in the market, which can be filled with various formulas to suit specific project needs.

GU-600 injection bonded resin provides medium to heavy strength, making it suitable for applications that demand high load-bearing capacity. All of our products are rigorously tested and approved in Germany according to EAD 330499-00-0601, the standard for bonded fasteners used in concrete.

In addition to the 380ml size, we also offer other sizes in the range, including 150ml, 235ml, 345ml, and 360ml, providing versatile options to meet a variety of anchoring requirements.

Chemical Fixing System - Acid And Alkali-Resisting Epoxy Acrylate Chemical Anchor

Designed for anchoring structural steel connections in environments with high acid and alkali exposure, we recommend using the GU-600 Epoxy Acrylate with styrene or the GU-2000 without styrene. All of our injectable cartridge mortars have been rigorously tested in European laboratories to ensure optimal performance for structural connections involving post-installed rebar and threaded anchors.

Specification Of Epoxy Acrylate Chemical Anchor

● Material: Epoxy Acrylate with styrene
● Model Number: GU-600
● Capacity: 380ml
● Mixing Ratio: 10:1
● Mixed Color: Gray
● Shelf Life: 18 months
● Standard Package: One cartridge with one mixer
● Other Accessory: Mixer, caulking gun, nylon sleeve, air pump, brush

Epoxy acrylate chemical anchor is high bonding strength adhesive

● Medium heavy load
● Good resistance to acid and alkali
● Versatile range of embedment depths
● Non-flammable and suitable for dry fastening
● Use with 380ml manual gun
● Cartridge reusable by simply exchanging static mixer

Medium and heavy duty load injection acrylated epoxy adhesive

GU-600 is a high-performance epoxy acrylate resin designed for medium to heavy-duty load applications. The 380ml injection epoxy acrylic adhesive is supplied in a coaxial cartridge, making it easy to install on a standard caulking gun for convenient use. This durable resin excels in medium and heavy-duty applications, offering exceptional performance even in aggressive environments, thanks to its high chemical resistance. It is ideal for a wide range of uses, including metal constructions, masonry joint reinforcement, structural anchoring, and concrete anchor installations. GU-600 provides reliable, long-lasting bonding strength in demanding conditions, ensuring secure and stable installations.

How to install a chemical anchor?

1. Drill the Hole: Drill the hole to the required diameter and depth as specified for the anchor installation. 2. Clean the Hole: Use a brush and air blow pump to thoroughly clean the hole, removing any dust or debris to ensure optimal bonding. 3. Remove Unmixed Mortar: Press out any unmixed mortar that cannot be used to ensure proper consistency when injecting the resin. 4. Inject the Mixed Mortar: Begin injecting the mixed mortar from the bottom of the drilled hole, filling it evenly. 5. Insert the Anchor: Insert and rotate the rebar, threaded rod, or steel strip into the drilled hole. Ensure the anchor is fully inserted without disturbing it until the resin has fully cured. Note: Avoid touching the inserted anchor until full curing is complete. Refer to our Technical Data Sheet (TDS) for specific curing times. Proper installation is crucial for maximizing the bonding performance of chemical anchors.

All Good Use Chemical Anchors - Qualified by IWB Lab in Germany and CSTB Lab in France

At present, there are no accredited laboratories in Asia for testing bonding anchors in compliance with European Technical Assessment (ETA) standards. Our chemical anchors undergo thorough testing according to EAD 330087-01-6001 and EAD 330499-00-0601 standards for rebar and threaded rod fasteners. We work closely with top experts in Europe who possess over 20 years of experience in the fastener sector. Our dedication to research and development drives continuous enhancements in our products and the advancement of our international certifications for chemical anchors.

Technical Data
SOLID SUBSTRATE REBAR INSTALLATION DETAILS
Pressure Destroy Haul Strength (Kgf/KN) Safety Haul Strength (Kgf/KN) Working Standard (mm)
Concrete Strength 4,000 psi 280 kg/cm2 4,000 psi 280 kg/cm2 Hole Diameter Hole Depth
Rebar No. #3 (Φ10) 3,530 35.7 1,177 11.9 13 90
#4 (Φ13) 5,490 55.5 1,830 18.5 16 120
#5 (Φ16) 9,070 91.6 3,023 30.5 20 145
#6 (Φ19) 14,140 142.8 4,713 47.6 25 170
#7 (Φ22) 18,620 188.1 6,207 62.7 28 200
#8 (Φ25) 23,185 234.2 7,728 78.1 32 225
#9 (Φ29) 25,350 256.1 8,450 85.4 37 250
10 (Φ32) 32,190 325.2 10,730 108.4 40 290
Remarks: 1. Concrete Strength fc': 280kg/cm2 (4,000 psi)
2. Rebar Strength: #3~#5 fy: 2,800 kgf/cm2, #6~#11 fy= 4,200 kgf/cm2
CURING TIME TABLE
Temperature (°C) Gelling Full Curing
0~5 6 hr.
5~10 30 min. 5 hr.
10~20 20 min. 4 hr.
20~30 10 min. 2 hr.
30~40 5 min. 40 min.
Please make pull off test for at least 24 hours after full cured.
FIXING CONSUMPTION PER CARTRIDGE
Anchor Size Hole Diameter
(mm)
Hole Depth
(mm)
Number of Fixings
150ml 235ml 345ml 360ml 380ml
M8 10 80 30 47 69 72 76
M10 12 90 18 29 42 44 47
M12 14 110 11 17 25 27 28
M16 18 125 6 9 14 14 15
M20 24 170 2 4 6 6 6
M24 28 210 1 2 3 4 4
M30 35 270 1 1 2 2 2
M36 40 330 X 1 1 1 1
Note: Based on continuous installation without interruptions or nozzle changes. Provided as a guide and will vary with temperature.
Related ProductsFiles DownloadInstallation GuideGallery
150ml Economical epoxy acrylate chemical anchor for rebaring works - 150ml epoxy acrylate resin
150ml Economical epoxy acrylate chemical anchor for rebaring works
GU-600 150ml

The 150ml single-tube epoxy acrylate chemical anchor is an excellent choice for DIY applications....

Details
235ml Long-lasting epoxy acrylate chemical adhesive for securing anchor rods - 235ml epoxy acrylate resin
235ml Long-lasting epoxy acrylate chemical adhesive for securing anchor rods
GU-600 235ml

The 235ml epoxy acrylate chemical anchor is a compact, fast-setting solution ideal for home...

Details
345ml Premium quality epoxy acrylate chemical anchor for multiple fixing applications - 345ml epoxy acrylate resin
345ml Premium quality epoxy acrylate chemical anchor for multiple fixing applications
GU-600 345ml

The 345ml epoxy acrylate chemical anchor is a popular medium-sized option for a wide range...

Details
360ml High bond strength epoxy acrylate chemical anchor for vertical and horizontal fixing - 360ml epoxy acrylate resin
360ml High bond strength epoxy acrylate chemical anchor for vertical and horizontal fixing
GU-600 360ml

The 360ml epoxy acrylate chemical anchor is a top-selling option for general fixations and reinforcement...

Details
380ml User-friendly coaxial cartridge manual caulking gun - Coaxial caulking gun - #807N
380ml User-friendly coaxial cartridge manual caulking gun
#807N

#807N manual dispenser is for co-axial 380ml/410ml cartridge. Durable steel frame and high...

Details
380ml Strong coaxial cartridge sealant caulking applicator - Coaxial caulking gun - G34-380
380ml Strong coaxial cartridge sealant caulking applicator
G34-380

G34-380 manual dispenser is for 380/410ml co-axial adhesive cartridge with mechanical thrust...

Details

380ml Heavy load epoxy acrylate chemical anchor for safety-critical fixing applications - Concrete bonding anchor bolt epoxy | Sold in 40 Countries Injectable Chemical Anchors Manufacturer Since 1997 | Good Use

Located in Taiwan since 1997, Good Use Hardware Co., Ltd. has been an injectable adhesive mortars and anchors manufacturer. Their main products, including 380ml Heavy load epoxy acrylate chemical anchor for safety-critical fixing applications, injection cartridges, chemical mortars, chemical anchors, anchor capsules, polyester resins and vinylester resins, which are sold in 40 countries.

Reputable factory of chemical anchor in Taiwan produces the widest range of adhesive anchor solutions for your concrete anchoring applications. with more than 15 years manufacturing experience for Chemical Anchor System, Injection Cartridge System, Construction Chemical Mortar and more. Certified chemical anchor solutions with wide selections of adhesive materials including epoxy anchors, concrete anchors, resin anchors for heavy loads in rebar application, diamond drilled holes and anchoring in solid concrete. Non-drip formula, ideal for overhead installation. Chemical anchor bolt and anchor fixings included for efficient, hassle-free, labor-saving chemical anchoring.

Good Use has been offering customers certified and tested high-quality chemical anchors, both with advanced technology and 25 years of experience, Good Use ensures each customer's demands are met.