Low temperature cure injectable vinylester resin

Low temperature cure injectable vinylester resin

GU-2000 380ml

Cold weather concrete block anchor resin

GU-2000 is the solution for cold weather adhesive anchoring applications in uncracked concrete. Fast curing is the feature of Vinyl ester. Save time to achieve high bonding strength. No styrene and VOC approval qualified for environmentally friendly and green house. Excellent in acid-resisting, alkali-resisting for chemical industry installation.

A two-component 10:1 resin chemical anchoring injection system. Convenient setting and fast curing in low temperature. All of our products had tested and approved in Germany according to EAD 330499-00-0601. Vinylester anchor mortar is available for fixings on non-cracked concrete, masonry, brick, stone, perforated brick. There are also 150ml, 235ml, 345ml and 360ml for diverse market preference.

Chemical fixing system - Fast curing viny lester chemical anchor

The obvious characteristic of vinylester hybrid mortar is fast curing to save installation time and hardening time. We develop diverse curing time to meet different country weather and installation temperature. Fast curing formula is not suitable for nonstandard high temperature which caused curing time accelerated. Please check technical data sheet for safety installation.



Specification of GU-2000 vinylester chemical anchor

  • Material: Vinylester Styrene Free
  • Model Number: GU-2000
  • Size: 380ml
  • Shelf Life: 18 months
  • Mixing Ratio: 10:1
  • Mixed Color: Gray
  • Standard Package: One cartridge with one mixer
  • Other Accessory: Mixer, caulking gun, nylon sleeve, air pump, brush

Good Use vinylester chemical anchor provide excellent bonding strength in cold weather

  • Suitable for cold weather application
  • Provide maximum flexibility and efficiency
  • Fast curing time
  • Styrene free and low odor with VOC certificate
  • Excellent acid and alkali resistance
  • ECO friendly building material

All Good Use chemical anchors have done sustained loads test at IWB lab in Germany

There is no qualified lab with equipment for testing bonding anchor according ETA regulations in Asia. All our items are tested by EAD 330499-00-0601 which is comprehensive plan for both of rebar and threaded rods. We cooperate and consult with leading experts in Europe who dedicate in the fasteners field for more than two decades. We keep improving our research capacity and upgrade international approvals of chemical anchor.

Winter version vinylester injection hybrid styrene free adhesive

GU-2000 winter version is developed principally to low temperature anchoring. It still provides fast curing time and high bonding strength for threaded stud bolts and rods. For applied to solid elements, such like concrete, stone, cement, and wood. It's very good chemical resistance to acid and alkali environment. In 10-20℃ working place, the gelling time is 5min and full curing time is 35min.

Technical Data

CHART 1. SOLID SUBSTRATE REBAR INSTALLATION DETAILS

PressureDestroy Haul Strength
(Kgf/KN)
Safety Haul Strength
(Kgf/KN)
Working Standard
(mm)
Concrete Strength4,000 psi280 kg/cm24,000 psi280 kg/cm2Hole DiameterHole Depth
Rebar No.#3(Φ10)3,54035.81,18011.91390
#4(Φ13)5,49055.41,82718.516120
#5(Φ16)9,06091.53,02030.520145
#6(Φ19)14,150142.94,71747.625170
#7(Φ22)18,630188.26,21062.728200
#8(Φ25)23,195234.37,73278.132225
#9(Φ29)25,340256.08,44785.337250
#10(Φ32)32,120324.410,707108.140290
Remarks:1. Concrete Strength fc': 280kg/cm2 (4,000 psi)
2. Rebar Strength: #3~#5 fy: 2,800 kgf/cm2, #6~#11 fy= 4,200 kgf/cm2

CHART 2. CURING TIME TABLE

Cartridge temperature (Mortar)Gelling timeTemperature at anchoring base
Curing time
-15℃ - -10℃15 hours.
-10℃ - -5℃10 hours.
-5℃ - ±0℃15 min.-5℃ - ±0℃4 hours.
-±0℃ - +5℃10 min.-±0℃ - +5℃1 hour 40 min.
+5℃ - +10℃6 min.+5℃ - +10℃50 min.
+10℃ - +20℃5 min.+10℃ - +20℃35 min.
Remarks:

1. Without approval
2. The above times apply from the moment of contact between resin and hardener in the static mixer.
For installation, the cartridge temperature must be at least +5℃. For longer installation times, when interruptions occur in work, the mixer should be replaced.
3. Pull out testing should be implemented after 24hours.

CHART 3. FIXING CONSUMPTION PER CARTRIDGE

Anchor SizeHole Diameter
(mm)
Hole Depth
(mm)
Number of Fixings
235ml280ml345ml360ml380ml
M810804756697276
M1012902934424447
M12141101721252728
M1618125911141415
M202417045666
M242821023344
M303527011222
M364033011111
Note: Based on continuous installation without interruptions or nozzle changes. Provided as a guide and will vary with temperature.

How to install chemical anchor?

1. Drill the specific hole size and depth. 2. Clean dust with brush and air blow pump. 3. Press out unmixed resin which can't be used. 4. Inject mixed resin into drilled hole and fill from the bottom. 5. Insert rebar/threaded rod/steel strip. Curing time refer to TDS. Don't touch until full curing. The installation process will affect the bonding performance of chemical anchors.



Related Products
  • 380ml anchoring system polyester chemical anchor - 380ml 400ml 410ml coaxial polyester adhesive anchoring
    380ml anchoring system polyester chemical anchor
    GU-100 380ml

    380ml polyester co-axial cartridge also called 400ml or 410ml in the market and is popular size in construction. It needs a specific caulking gun to extrude the mortar.Polyester with styrene chemical anchor is classic and most popular material for general purpose. Economical price satisfies most fixing demands of medium loads. Applicable for rebar doweling, handrail, facade, pipelines, awnings, brackets. All of our chemical anchor had tested and approved in Germany according to EAD 330499-00-0601. There are also 150ml, 235ml, 345ml and 360ml available in the range.


  • 380ml anchor system epoxy acrylate chemical anchor - 380ml epoxy acrylate resin
    380ml anchor system epoxy acrylate chemical anchor
    GU-600 380ml

    380ml is coaxial cartridge design required special dispensing tool. Also called 400ml or 410ml in the market which can be filled different formula.GU-600 injection bonded resin is middle to heavy strength for extensive loads requirements. All of our products had tested and approved in Germany according to EAD 330499-00-0601 which is norm of bonded fasteners for use in concrete. There are also 150ml, 235ml, 345ml and 380ml available in the range.


  • 150ml injectable vinylester chemical anchor - GU-2000 150ml Vinyl ester styrene free, injection mortar suitable for silicon gun
    150ml injectable vinylester chemical anchor
    GU-2000 150ml

    150ml vinylester injection glue anchor is design for DIY fixing market. It’s very suitable house repair and building fixing project.A two-component 10:1 resin chemical anchoring injection system. Convenient setting and fast curing in low temperature. It is environmentally friendly item without styrene. All of our products had tested and approved in Germany according to EAD 330499-00-0601. There are also 235ml, 345ml, 360ml and 380ml for diverse market preference.


  • 235ml injectable vinylester chemical anchor - GU-2000 235ml Vinyl ester styrene free, the clever injection mortar for anchoring in masonry and concrete
    235ml injectable vinylester chemical anchor
    GU-2000 235ml

    235ml vinylester injectable adhesive is a high performance and rapid curing two-part chemical anchoring system. With high loads capacity and chemical resistant.A two-component 10:1 resin chemical anchoring injection system. Convenient setting and fast curing in low temperature. It is environmentally friendly item without styrene. All of our products had tested and approved in Germany according to EAD 330499-00-0601. There are also 150ml, 345ml, 360ml and 380ml for diverse market preference.


  • 345ml injectable vinylester chemical anchor - GU-2000 345ml Vinyl ester styrene free, the powerful injection mortar for rebar connections and concrete
    345ml injectable vinylester chemical anchor
    GU-2000 345ml

    Approved vinylester mortar is for fixing threaded rod and rebar on non-cracked concrete for structure reinforcement. There are also 150ml, 235ml, 360ml and 380ml for diverse market preference.A two-component 10:1 resin chemical anchoring injection system. Convenient setting and fast curing in low temperature. It is environmentally friendly item without styrene. All of our products had tested and approved in Germany according to EAD 330499-00-0601. No styrene contained and VOC approval qualified for eco-friendly and green house.


  • 360ml injectable vinylester chemical anchor - GU-2000 360ml Vinyl ester styrene free, the powerful injection mortar for steelwork constructions
    360ml injectable vinylester chemical anchor
    GU-2000 360ml

    360ml vinylester chemical mortar anchoring is the most popular resin cartridge system. The fast curing making it convenient to use in guard rails, staircase, machines, awnings, gate and any hollow blocks made from concrete, stone or solid sand-lime brick.A two-component 10:1 resin chemical anchoring injection system. Convenient setting and fast curing in low temperature. It is environmentally friendly item without styrene. All of our products had tested and approved in Germany according to EAD 330499-00-0601. There are also 150ml, 235ml, 345ml and 380ml for diverse market preference.


  • 380ml injectable vinylester chemical anchor - GU-2000 380ml Vinyl ester styrene free, the high bonded injection mortar for fast curing in tropical environments
    380ml injectable vinylester chemical anchor
    GU-2000 380ml

    380ml fast hardening vinylester is good for hollow brick fixing with anchor sleeve. It is also called 400ml or 410ml in the market. It required specific dispenser to go with the coaxial cartridge.A two-component 10:1 resin chemical anchoring injection system. Convenient setting and fast curing in low temperature. It is environmentally friendly item without styrene. All of our products had tested and approved in Germany according to EAD 330499-00-0601. There are also 150ml, 235ml, 345ml and 360ml for diverse market preference.


  • 380ml coaxial cartridge caulking gun - Coaxial caulking gun - #807N
    380ml coaxial cartridge caulking gun
    #807N

    #807N manual dispener is for co-axial 380ml/410ml cartridge. Durable steel frame and high hardness pushing rod which last for long time. High value caulking gun with good price. For high viscosity materials, you can refer to G34-380 dispenser.


  • 380ml coaxial cartridge caulking gun - Coaxial caulking gun - G34-380
    380ml coaxial cartridge caulking gun
    G34-380

    G34-380 manual dispenser is for 380/410ml co-axial adhesive cartridge with mechanical thrust ratio: 18:1 / Stroke: 5.5mm. Suitable for high viscosity sealant in cold weather and maximum force is 350kgf (3.5kN). High quality of aluminum alloy handle / Steel trigger, Twin heat treatment steel push plates, Heat treatment chrome plated push rod.


  • Mixing nozzle for 10:1 chemical anchor - Static mixer for 10:1 chemical anchor
    Mixing nozzle for 10:1 chemical anchor
    #817

    Mixing nozzle is designed to mix and dispense two-component chemical anchor at the same time. Attached mixing nozzle to a dual cartridge, the two parts of adhesive will combine and mix by the spiral part in the nozzle while dispensing. A good mixing nozzle helps to control the dispensing volume and produce less waste. #817 mixing nozzle is ideal for Good Use chemical anchor with 10:1 mixing ratio.


  • 380ml Empty Cartridge - 380ml Empty Cartridge
    380ml Empty Cartridge
    380ml

    380ml cartridge type is coaxial and high grade nylon material. Single tube requires to apply with coaxial central extrusion tool.



Files Download

Gun Installation Guide
1) Caulking gun for 380ml injection cartridge.2. Remove the screw cap.
coaxial caulking guncoaxial caulking gun
3) Screw on mixer nollze.4) Put the cartridge into the caulking gun and start construction.
coaxial caulking guncoaxial caulking gun
Gallery

Menu

Best Sale

Low temperature cure injectable vinylester resin | Chemical Anchor Manufacturer - Good Use

Good Use Hardware Co., Ltd. is one of prime Low temperature cure injectable vinylester resin | chemical anchors suppliers based in Taiwan since 1997.

Certified chemical anchor solutions with wide selections of adhesive materials including epoxy anchors, concrete anchors, resin anchors for heavy loads in rebar application, diamond drilled holes and anchoring in solid concrete. Non-drip formula, ideal for overhead installation. Chemical anchor bolt and anchor fixings included for efficient, hassle-free, labor-saving chemical anchoring.

Good Use has been offering customers certified tested high-quality chemical anchors. Both with advanced technology and 20 years of experience, Good Use ensures each customer's demands are met.


Hot Products

Professional epoxy resin

Professional epoxy resin

Excellent bonding strength for rebar connections and extension anchoring. Bridges, civil structures, retrofitting.

Read More
High temperature epoxy resin

High temperature epoxy resin

Suitable working time for use in tropical climate. Fixing diamond drilled holes, deep embedment depths, large diameter rebar.

Read More
Winter concrete epoxy resin

Winter concrete epoxy resin

Special winter formula for anchoring at low temperature. For dry, wet, water saturated concrete.

Read More