
Professional epoxy resin
Excellent bonding strength for rebar connections and extension anchoring. Bridges, civil structures, retrofitting.
Read MoreInjectable Adhesive Anchors is not only for fixing on concrete, but also available for natural rock. It also can withstand long fixing durability on stone. The composition of stone is complex and might cause the strength different. If specific loading strength is required, the stone strength should be detected by gauge and calculate resin anchoring strength.
400ml epoxy chemical anchor is 3:1 injectable cartridge for rebar connections and heavy anchoring. Suitable for construction in tropical or summer.Epoxy satisfy the demand for high strength, wide temperature range and nonstandard installation on mostly case. Outstanding tension test by Germany lab according to EAD 330499-00-0601 which is bonded fastener use in concrete with rebar and threaded rod. Epoxy injection mortar can be used indoors or unventilated areas without health and safety concerns. There is also 585ml available in the range.
GU-500SD 400ML is strongest in all chemical anchoring. Remarkable at cold weather, cracked concrete and water saturated holes.Ultimate performance for rebar connections, heavy anchoring on dry concrete, wet concrete, cracked and uncracked concrete. Advanced-formula pure epoxy adhesive is workable at wide temperature and crucial anchoring. Quality tested and approved by Germany lab. Non-sag allows for overhead and suspended ceiling application. There is also 585ml available in the range.
345ml polyester chemical anchor is middle size and more flexible in market. It needs a specific caulking gun to extrude the mortar.Polyester with styrene chemical anchor is classic and most popular material for general purpose. Economical price satisfies most fixing demands of medium loads. Applicable for rebar doweling, handrail, facade, pipelines, awnings, brackets. All of our chemical anchor had tested and approved in Germany according to EAD 330499-00-0601. There are also 150ml, 235ml, 360ml and 380ml available in the range.
Small volume 235ml side by side polyester chemical anchor is easy use for small area and most popular size in Taiwan domestic market. It needs a specific caulking gun to extrude the mortar.Polyester with styrene chemical anchor is classic and most popular material for general purpose. Economical price satisfies most fixing demands of medium loads. Applicable for rebar doweling, handrail, facade, pipelines, awnings, brackets. All of our chemical anchor had tested and approved in Germany according to EAD 330499-00-0601. There are also 150ml, 345ml, 360ml and 380ml available in the range.
Approved vinylester mortar is for fixing threaded rod and rebar on non-cracked concrete for structure reinforcement. There are also 150ml, 235ml, 360ml and 380ml for diverse market preference.A two-component 10:1 resin chemical anchoring injection system. Convenient setting and fast curing in low temperature. It is environmentally friendly item without styrene. All of our products had tested and approved in Germany according to EAD 330499-00-0601. No styrene contained and VOC approval qualified for eco-friendly and green house.
Excellent bonding strength for rebar connections and extension anchoring. Bridges, civil structures, retrofitting.
Read MoreSuitable working time for use in tropical climate. Fixing diamond drilled holes, deep embedment depths, large diameter rebar.
Read MoreSpecial winter formula for anchoring at low temperature. For dry, wet, water saturated concrete.
Read More