150ml injectable vinylester chemical anchor
Vinyl ester resin fast cure hybrid mortar
GU-2000 150ml is design for DIY fixing market. A two component 10:1 resin chemical anchoring injection system. Convenient setting and fast curing in low temperature. A formulation derived from thread rods, studs, rebar into concrete, masonry, stone and hollow brick. Used for high performance structural applications.
No styrene is environmentally friendly item, 150ml packing very suitable house repair and building fixing project. There are 235ml, 345ml, 360ml and 380ml available for diverse market preference.
Chemical fixing system - Fast curing viny lester chemical anchor
The obvious characteristic of vinylester hybrid mortar is fast curing to save installation time and hardening time. We develop diverse curing time to meet different country weather and installation temperature. Fast curing formula is not suitable for nonstandard high temperature which caused curing time accelerated. Please check technical data sheet for safety installation.
- Material: Vinylester Styrene Free
- Model Number: GU-2000
- Size: 150ml
- Shelf Life: 18 months
- Mixing Ratio: 10:1
- Mixed Color: Gray
- Standard Package: One cartridge with one mixer
- Other Accessory: Mixer, caulking gun, nylon sleeve, air pump, brush
Features & Benefits
- High load performance.
- Fast curing and secure setting.
- Styrene free and low VOC.
- Good resistance to acid and alkali.
- Fits standard silicone caulk guns.
- Small package and kind environments.
Residence house railing installation
150ml is small volume two component for high bonging fixing project use, it's very suitable and convenience for house repair, balcony terrace railing installation or fixing studs for air conditional frame.
CHART 1. SOLID SUBSTRATE REBAR INSTALLATION DETAILS
|Pressure||Destroy Haul Strength|
|Safety Haul Strength|
|Concrete Strength||4,000 psi||280 kg/cm2||4,000 psi||280 kg/cm2||Hole Diameter||Hole Depth|
|Remarks:||1. Concrete Strength fc': 280kg/cm2 (4,000 psi)|
2. Rebar Strength: #3~#5 fy: 2,800 kgf/cm2, #6~#11 fy= 4,200 kgf/cm2
CHART 2. CURING TIME TABLE
|Temperature (°C)||Gelling||Full Curing|
|5||90 min.||8 hr.|
|10||40 min.||4 hr.|
|20||18 min.||1.5 hr.|
|30||9 min.||1 hr.|
|40||6 min.||1 hr.|
|Please make pull out test over 24 hours after full cured.|
CHART 3. FIXING CONSUMPTION PER CARTRIDGE
|Anchor Size||Hole Diameter|
|Number of Fixings|
|Note: Based on continuous installation without interruptions or nozzle changes. Provided as a guide and will vary with temperature.|
How to install chemical anchor?
1. Drill the specific hole size and depth. 2. Clean dust with brush and air blow pump. 3. Press out unmixed resin which can't be used. 4. Inject mixed resin into drilled hole and fill from the bottom. 5. Insert rebar/threaded rod/steel strip. Curing time refer to TDS. Don't touch until full curing. The installation process will affect the bonding performance of chemical anchors.
- Related Products
Polyester with styrene chemical anchor is classic and most popular material for general purpose. Economical price satisfies most fixing demands of medium loads. Applicable for rebar doweling, handrail, facade, pipelines, awnings, brackets. Use with ordinary silicone gun no special extrusion tools.150ml is the smallest volume in product range. There are 235ml, 345ml, 360ml and 380ml available for diverse market preference. All volume cartridge for fixings in non-cracked concrete, masonry, brick, stone, perforated brick.
Epoxy acrylate cartridge is easy installation and economical, because this unique cartridge system can be applied using a standard silicone sealant application gun. Suitable for building materials, solid brick and sand-lime brick, fabricated steel, sign posts, safety rails, structural steel.
GU-2000 235ml is a high performance, rapid curing two-part chemical anchoring system based on a high reactivity Vinyl ester. Applied in side by side action this resin will produce a strong, chemical resistant fixing.
The injection mortar GU-2000 has a range of test report under ETAG 001 Part 5 standard for non-cracked concrete for thread rod and rebar connections. The GU-2000 has an extended processing time that prevents the premature hardening of the mortar at different temperatures. It is ideally suited to large drill hole depths.
The Vinyl ester GU-2000 360ml is the most popular resin cartridge system. The fast curing in tropical grade making it convenient to use in guard rails, staircase, machines, awnings, gate and any hollow blocks made from concrete, stone or solid sand-lime brick.
The Vinyl ester styrene free is available in tropical environment and use for fast curing request project. The 380ml cartridge tube is a unique coaxial cartridge system. The 380ml with mixing ratio 10:1 also called 400ml or 410ml in the market. Special dispenser is required to use with the cartridge.
The GU-2000 is the solution for cold weather adhesive anchoring applications in uncracked concrete. Fast curing is the feature of Vinyl ester. Save time to achieve high bonding strength. No styrene and VOC approval qualified for environmentally friendly and green house. Excellent in acid-resisting, alkali-resisting for chemical industry installation.
The caulking gun is single tube type also available for silicone. Material is aluminum alloy handle and steel trigger. Easy hook for hanging the caulking gun on a ladder. Suitable for the following capacity 150ml and 280ml 10:1 of polyester resin, epoxy acrylate and vinylester.
This is a caulking gun designed for lightweight and economical price. The material for aluminum alloy and lightweight steel construction. Rotatable 360° frame. Convenient hook for hanging the caulking gun. It is suitable with 150ml, 280ml, 300ml general adhesive cartridge and sealant.
811N is a premium gun designed for the professional. Outfitted with a full sized handle for a comfortable grip and ultimate precision. For ease of use, it is equipped with hand action lever for dispensing control. There are various size and ratio of cartridges that required special caulking gun. We supply diverse chemical anchor cartridge.
High quality 817 series static mixers to mix two components in dual cartridges by dispenser. The various sizes and alternating angled elements ensure consistent and accurate dispensing with products of various viscosities and cure times. They enhance control, produce less waste and save time by eliminating manual mixing. Static mixer is polypropylene.
150ml cartridge is single volume tube with lightweight and nylon material. Easy mixing for normal silicone application gun.
- Files Download
Bonding strength chart on dry concrete by different hole size and depth. Vinylester styrene free for all fixing demands.
Technical information of anchor design, curing time, edge distance, consumption per hole and installation procedure.
Vinylester pull out strength report for diverse bolt size on 4000psi concrete according to ASTM E488-96 by SGS lab.
Vinylester tensile test report of rebar fixing for 25mm hole size by Thailand AIT engieering lab. According to local market demands, our products will test by various qualified lab.
Vinylester tensile test report of rebar fixing for 16mm hole size by Thailand AIT engieering lab. According to local market demands, our products will test by various qualified lab.
- Gun Installation Guide
- What is the difference between materials?
- What is the difference between cartridge volume?
- Styrene free v.s. with Styrene?
- Gelling time (working time) & full curing time (hardening time)?
- How does your factory do regarding quality control?
- Are you a manufacturer?
- How to store the injection cartridges? How is the shelf life?
- What can we do if the injection cartridge is not finished yet?
- Order & Payment
- Products Information
- Contact Us
150ml injectable vinylester chemical anchor | Chemical Anchor Manufacturer - Good Use
Good Use Hardware Co., Ltd. is one of prime 150ml injectable vinylester chemical anchor | chemical anchors suppliers based in Taiwan since 1997.
Certified chemical anchor solutions with wide selections of adhesive materials including epoxy anchors, concrete anchors, resin anchors for heavy loads in rebar application, diamond drilled holes and anchoring in solid concrete. Non-drip formula, ideal for overhead installation. Chemical anchor bolt and anchor fixings included for efficient, hassle-free, labor-saving chemical anchoring.
Good Use has been offering customers certified tested high-quality chemical anchors. Both with advanced technology and 20 years of experience, Good Use ensures each customer's demands are met.