235ml anchor system epoxy acrylate chemical anchor
Fast gelling time epoxy acrylate anchoring resin
Epoxy acrylate resin is high loads for medium. The cartridge is general 235ml volume. Convenient setting adhesive anchoring system with special caulking gun. Application with one action dispensing and two parts mixing through nozzle. Chemical anchors use to cracked concrete, reuse on small reinforced work.
Chemical fixing system - Acid and alkali-resisting epoxy acrylate chemical anchor
For anchoring structural steel connections at specific environment of acid and alkali. We will suggest to apply GU-600 Epoxy acrylate with styrene or GU-2000 without styrene. All of our injectable cartridge mortar tested in European lab to approval the performance on structural connections with post-installed rebar and threaded anchor.
- Material: Epoxy Acrylate with styrene
- Model Number: GU-600
- Size: 235ml
- Shelf Life: 18 months
- Mixing Ratio: 10:1
- Mixed Color: Gray
- Standard Package: One cartridge with one mixer
- Other Accessory: Mixer, caulking gun, nylon sleeve, air pump, brush
Features & Benefits
- Medium heavy load and economical choice.
- Resistance to acid and alkali. and low VOC.
- Easy and quick use, less waste.
- Uses standard sealant gun.
- Cartridge reusable by simply exchanging static mixer.
Good resistance to acid and alkali
Convenient installation and economical. Mixing well and no shrinkage.
CHART 1. SOLID SUBSTRATE REBAR INSTALLATION DETAILS
|Pressure||Destroy Haul Strength (Kgf/KN)||Safety Haul Strength (Kgf/KN)||Working Standard (mm)|
|Concrete Strength||4,000 psi||280 kg/cm2||4,000 psi||280 kg/cm2||Hole Diameter||Hole Depth|
|Remarks:||1. Concrete Strength fc': 280kg/cm2 (4,000 psi)|
2. Rebar Strength: #3~#5 fy: 2,800 kgf/cm2, #6~#11 fy= 4,200 kgf/cm2
CHART 2. CURING TIME TABLE
|Temperature (°C)||Gelling||Full Curing|
|5~9||2 hr.||90 hr.|
|10~14||90 min.||64 hr.|
|15~19||45 min.||28 hr.|
|20~29||30 min.||18 hr.|
|30~39||20 min.||7 hr.|
|40||12 min.||5 hr.|
|Please make pull out test over 24 hours after full cured.|
CHART 3. FIXING CONSUMPTION PER CARTRIDGE
|Anchor Size||Hole Diameter|
|Number of Fixings|
|Note: Based on continuous installation without interruptions or nozzle changes. Provided as a guide and will vary with temperature.|
How to install chemical anchor?
1. Drill the specific hole size and depth. 2. Clean dust with brush and air blow pump. 3. Press out unmixed resin which can't be used. 4. Inject mixed resin into drilled hole and fill from the bottom. 5. Insert rebar/threaded rod/steel strip. Curing time refer to TDS. Don't touch until full curing. The installation process will affect the bonding performance of chemical anchors.
- Related Products
Polyester with styrene chemical anchor is classic and most popular material for general purpose. Economical price satisfies most fixing demands of medium loads. Applicable for rebar doweling, handrail, facade, pipelines, awnings, brackets. Use with special caulking gun to extrude resin.235ml side by side small volume easy use for small area. There are 150ml, 345ml, 360ml and 380ml available for diverse market preference. All volume cartridge for fixings in non-cracked concrete, masonry, brick, stone, perforated brick.
GU-2000 235ml is a high performance, rapid curing two-part chemical anchoring system based on a high reactivity Vinyl ester. Applied in side by side action this resin will produce a strong, chemical resistant fixing.
Epoxy acrylate cartridge is easy installation and economical, because this unique cartridge system can be applied using a standard silicone sealant application gun. Suitable for building materials, solid brick and sand-lime brick, fabricated steel, sign posts, safety rails, structural steel.
Epoxy acrylate is high chemical resistance reinforcement rebar adhesive. No drip, low odor, Good chemical resistance. High performance injection mortar for solid and concrete supports. On-site easy mixing and use. Suitable for rods and reinforcing bars, concrete, natural stone, steel bar, aerated concrete.
A two component chemical anchoring injection system for epoxy acrylate resin. It has been developed as a good resistance chemical for high load and critical applications including structural steel, mechanical services, starter bars, etc.
2-component injection resin based on a epoxy acrylate for anchoring bolt and rebar. It's medium-high loads. high resistance to chemical attack. It is no shrinkage, product with high bond strength and fast strength gain. Coaxial completely mixed to simultaneously dispensed from through a static mixing nozzle. Suitable for anchoring dynamically stressed structures, building components.
811N is a premium gun designed for the professional. Outfitted with a full sized handle for a comfortable grip and ultimate precision. For ease of use, it is equipped with hand action lever for dispensing control. There are various size and ratio of cartridges that required special caulking gun. We supply diverse chemical anchor cartridge.
High quality 817 series static mixers to mix two components in dual cartridges by dispenser. The various sizes and alternating angled elements ensure consistent and accurate dispensing with products of various viscosities and cure times. They enhance control, produce less waste and save time by eliminating manual mixing. Static mixer is polypropylene.
235ml empty dual cartridge is small, high material nylon for DIY market. Easy extrusion with mixing ratio 10:1 and special caulking gun required.
- Files Download
Bonding strength chart on dry concrete by different hole size and depth. Epoxy acrylate for all fixing demands.
Technical information of anchor design, curing time, edge distance, consumption per hole and installation procedure.
Epoxy acrylate pull out strength report for diverse bolt size on 4000psi concrete according to ASTM E488-96 by SGS lab.
Epoxy acrylate tensile test report of rebar fixing for 25mm hole size by Thailand AIT engieering lab. According to local market demands, our products will test by various qualified lab.
Epoxy acrylate tensile test report of rebar fixing for 16mm hole size by Thailand AIT engieering lab. According to local market demands, our products will test by various qualified lab.
- Gun Installation Guide
- What is the difference between materials?
- What is the difference between cartridge volume?
- Styrene free v.s. with Styrene?
- Gelling time (working time) & full curing time (hardening time)?
- How does your factory do regarding quality control?
- Are you a manufacturer?
- How to store the injection cartridges? How is the shelf life?
- What can we do if the injection cartridge is not finished yet?
- Order & Payment
- Products Information
- Contact Us
235ml anchor system epoxy acrylate chemical anchor | Chemical Anchor Manufacturer - Good Use
Good Use Hardware Co., Ltd. is one of prime 235ml anchor system epoxy acrylate chemical anchor | chemical anchors suppliers based in Taiwan since 1997.
Certified chemical anchor solutions with wide selections of adhesive materials including epoxy anchors, concrete anchors, resin anchors for heavy loads in rebar application, diamond drilled holes and anchoring in solid concrete. Non-drip formula, ideal for overhead installation. Chemical anchor bolt and anchor fixings included for efficient, hassle-free, labor-saving chemical anchoring.
Good Use has been offering customers certified tested high-quality chemical anchors. Both with advanced technology and 20 years of experience, Good Use ensures each customer's demands are met.