345ml injectable vinylester chemical anchor

345ml injectable vinylester chemical anchor

GU-2000 345ml

LEED approved chemical injection mortar

The injection mortar GU-2000 has a range of test report under ETAG 001 Part 5 standard for non-cracked concrete for thread rod and rebar connections. The GU-2000 has an extended processing time that prevents the premature hardening of the mortar at different temperatures. It is ideally suited to large drill hole depths.

Chemical fixing system - Fast curing viny lester chemical anchor

The obvious characteristic of vinylester hybrid mortar is fast curing to save installation time and hardening time. We develop diverse curing time to meet different country weather and installation temperature. Fast curing formula is not suitable for nonstandard high temperature which caused curing time accelerated. Please check technical data sheet for safety installation.


  • Material: Vinylester Styrene Free
  • Model Number: GU-2000
  • Size: 345ml
  • Shelf Life: 18 months
  • Mixing Ratio: 10:1
  • Mixed Color: Gray
  • Standard Package: One cartridge with one mixer
  • Other Accessory: Mixer, caulking gun, nylon sleeve, air pump, brush

Features & Benefits

  • Maximum flexibility and efficiency.
  • Curing time excellent.
  • Styrene free and low VOC.
  • Good resistance to acid and alkali.
  • Fits 345ml glue caulk guns.
  • Environmentally friendly.

Anchor studs fix

The two-component side by side chemical anchoring injection system. Suitable for high load within standard annulus and embedment. Fast working times for sensitive applications.

Technical Data


PressureDestroy Haul Strength
Safety Haul Strength
Working Standard
Concrete Strength4,000 psi280 kg/cm24,000 psi280 kg/cm2Hole DiameterHole Depth
Rebar No.#3(Φ10)3,54035.81,18011.91390
Remarks:1. Concrete Strength fc': 280kg/cm2 (4,000 psi)
2. Rebar Strength: #3~#5 fy: 2,800 kgf/cm2, #6~#11 fy= 4,200 kgf/cm2


Temperature (°C)GellingFull Curing
590 min. 8 hr.
1040 min.4 hr.
2018 min.1.5 hr.
309 min.1 hr.
406 min.1 hr.
Please make pull out test over 24 hours after full cured.


Anchor SizeHole Diameter
Hole Depth
Number of Fixings
Note: Based on continuous installation without interruptions or nozzle changes. Provided as a guide and will vary with temperature.

How to install chemical anchor?

1. Drill the specific hole size and depth. 2. Clean dust with brush and air blow pump. 3. Press out unmixed resin which can't be used. 4. Inject mixed resin into drilled hole and fill from the bottom. 5. Insert rebar/threaded rod/steel strip. Curing time refer to TDS. Don't touch until full curing. The installation process will affect the bonding performance of chemical anchors.

Related Products
  • 345ml anchoring system polyester chemical anchor - 345ml two components polyester bonded anchor
    345ml anchoring system polyester chemical anchor
    GU-100 345ml

    Polyester with styrene chemical anchor is classic and most popular material for general purpose. Economical price satisfies most fixing demands of medium loads. Applicable for rebar doweling, handrail, facade, pipelines, awnings, brackets. Use with special caulking gun to extrude resin.345ml injection mortar is middle size and more flexible in market. There are 150ml, 235ml, 360ml and 380ml available for diverse market preference. All volume cartridge for fixings in non-cracked concrete, masonry, brick, stone, perforated brick.

  • 345ml anchor system epoxy acrylate chemical anchor - 345ml epoxy acrylate resin
    345ml anchor system epoxy acrylate chemical anchor
    GU-600 345ml

    Epoxy acrylate is high chemical resistance reinforcement rebar adhesive. No drip, low odor, Good chemical resistance. High performance injection mortar for solid and concrete supports. On-site easy mixing and use. Suitable for rods and reinforcing bars, concrete, natural stone, steel bar, aerated concrete.

  • 150ml injectable vinylester chemical anchor - GU-2000 150ml Vinyl ester styrene free, injection mortar suitable for silicon gun
    150ml injectable vinylester chemical anchor
    GU-2000 150ml

    GU-2000 150ml is design for DIY fixing market. A two component 10:1 resin chemical anchoring injection system. Convenient setting and fast curing in low temperature. A formulation derived from thread rods, studs, rebar into concrete, masonry, stone and hollow brick. Used for high performance structural applications.No styrene is environmentally friendly item, 150ml packing very suitable house repair and building fixing project. There are 235ml, 345ml, 360ml and 380ml available for diverse market preference.

  • 235ml injectable vinylester chemical anchor - GU-2000 235ml Vinyl ester styrene free, the clever injection mortar for anchoring in masonry and concrete
    235ml injectable vinylester chemical anchor
    GU-2000 235ml

    GU-2000 235ml is a high performance, rapid curing two-part chemical anchoring system based on a high reactivity Vinyl ester. Applied in side by side action this resin will produce a strong, chemical resistant fixing.

  • 360ml injectable vinylester chemical anchor - GU-2000 360ml Vinyl ester styrene free, the powerful injection mortar for steelwork constructions
    360ml injectable vinylester chemical anchor
    GU-2000 360ml

    The Vinyl ester GU-2000 360ml is the most popular resin cartridge system. The fast curing in tropical grade making it convenient to use in guard rails, staircase, machines, awnings, gate and any hollow blocks made from concrete, stone or solid sand-lime brick.

  • 380ml injectable vinylester chemical anchor - GU-2000 380ml Vinyl ester styrene free, the high bonded injection mortar for fast curing in tropical environments
    380ml injectable vinylester chemical anchor
    GU-2000 380ml

    The Vinyl ester styrene free is available in tropical environment and use for fast curing request project. The 380ml cartridge tube is a unique coaxial cartridge system. The 380ml with mixing ratio 10:1 also called 400ml or 410ml in the market. Special dispenser is required to use with the cartridge.

  • Low temperature cure injectable vinylester resin - GU-2000 Vinyl ester styrene free, the high bonded injection mortar in winter environments
    Low temperature cure injectable vinylester resin
    GU-2000 380ml

    The GU-2000 is the solution for cold weather adhesive anchoring applications in uncracked concrete. Fast curing is the feature of Vinyl ester. Save time to achieve high bonding strength. No styrene and VOC approval qualified for environmentally friendly and green house. Excellent in acid-resisting, alkali-resisting for chemical industry installation.

  • 360ml two component caulking gun - Best caulking gun - 811N
    360ml two component caulking gun

    811N is a premium gun designed for the professional. Outfitted with a full sized handle for a comfortable grip and ultimate precision. For ease of use, it is equipped with hand action lever for dispensing control. There are various size and ratio of cartridges that required special caulking gun. We supply diverse chemical anchor cartridge.

  • Mixing nozzle - Static mixer 817
    Mixing nozzle

    High quality 817 series static mixers to mix two components in dual cartridges by dispenser. The various sizes and alternating angled elements ensure consistent and accurate dispensing with products of various viscosities and cure times. They enhance control, produce less waste and save time by eliminating manual mixing. Static mixer is polypropylene.

  • 345ml Empty Cartridge - 345ml Empty Cartridge
    345ml Empty Cartridge

    345ml excellent sealing nylon cartridge fits industry chemical anchor and adhesive dispensers. Plunger seal design provides excellent leak-resistant for low and high viscosity materials.

Files Download

Gun Installation Guide
1) Caulking gun for 345ml injection cartridge.2. Remove the screw cap.
dispenser gundispenser gun
3) Screw on mixer nollze.4) Put the cartridge into the caulking gun and start construction.
dispenser gundispenser gun


Best Sale

345ml injectable vinylester chemical anchor | Chemical Anchor Manufacturer - Good Use

Good Use Hardware Co., Ltd. is one of prime 345ml injectable vinylester chemical anchor | chemical anchors suppliers based in Taiwan since 1997.

Certified chemical anchor solutions with wide selections of adhesive materials including epoxy anchors, concrete anchors, resin anchors for heavy loads in rebar application, diamond drilled holes and anchoring in solid concrete. Non-drip formula, ideal for overhead installation. Chemical anchor bolt and anchor fixings included for efficient, hassle-free, labor-saving chemical anchoring.

Good Use has been offering customers certified tested high-quality chemical anchors. Both with advanced technology and 20 years of experience, Good Use ensures each customer's demands are met.

Hot Products

Professional epoxy resin

Professional epoxy resin

Excellent bonding strength for rebar connections and extension anchoring. Bridges, civil structures, retrofitting.

Read More
High temperature epoxy resin

High temperature epoxy resin

Suitable working time for use in tropical climate. Fixing diamond drilled holes, deep embedment depths, large diameter rebar.

Read More
Winter concrete epoxy resin

Winter concrete epoxy resin

Special winter formula for anchoring at low temperature. For dry, wet, water saturated concrete.

Read More