400ml Tropical Epoxy Chemical Anchor
GU-500 400ml 3:1
High Temperature Epoxy Anchoring Mortar
400ml epoxy chemical anchor is 3:1 injectable cartridge for rebar connections and heavy anchoring. Suitable for construction in tropical or summer.
Epoxy satisfy the demand for high strength, wide temperature range and nonstandard installation on mostly case. Outstanding tension test by Germany lab according to EAD 330499-00-0601 which is bonded fastener use in concrete with rebar and threaded rod. Epoxy injection mortar can be used indoors or unventilated areas without health and safety concerns. There is also 585ml available in the range.
Chemical fixing system - Ultimate performance pure epoxy chemical anchor
High-end epoxy mortar for heavy anchoring and critical conditions. In variation case of anchoring work which required higher performance to satisfy and secure the anchoring in dry, wet, uncracked, cracked concrete even in seismic conditions or temperature variation and installation limitation. We tested diverse anchoring condition in ETAG approval lab and with report to compare. Epoxy injectable adhesive anchor is strongest one of bonding fasteners which is growing demands.
Specification of GU-500 Pure epoxy chemical anchor
- Material: Pure Epoxy
- Model Number: GU-500
- Size: 400ml
- Shelf Life: 18 months
- Mixing Ratio: 3:1
- Mixed Color: Orange
- Standard Package: One cartridge with one mixer
- Other Accessory: Mixer, caulking gun, nylon sleeve, air pump, brush
Good Use pure epoxy chemical anchor provides longer working time
- Performance testing by ETAG qualified lab according to EAD 330499-00-0601
- Ultimate bonded strength for wide-ranging high performance requests or particular conditions
- Good chemical resistance and better for high and low temperature
- Ideal for deep embedment
- Longer working time and no shrinkage
- Orange color for easy monitoring
- Styrene free, low odor and LEED tested for VOC (Volatile Organic Compounds)
- No health or safety concern to slow down your work
All Good Use chemical anchors have done sustained loads test at IWB lab in Germany
There is no qualified lab with equipment for testing bonding anchor according ETA regulations in Asia. All our items are tested by EAD 330499-00-0601 which is comprehensive plan for both of rebar and threaded rods. We cooperate and consult with leading experts in Europe who dedicate in the fasteners field for more than two decades. We keep improving our research capacity and upgrade international approvals of chemical anchor.
Epoxy anchoring for wall extension, building facades, beam to column connection
High strength epoxy anchoring adhesive can be dispensed at cold and warm temperature. Extensive use in most high strength request for anchoring from new building to old, retrofit or remodel the structure, connect new extension and strengthen present beam. Chemical anchoring is efficient and fast way for strengthening. For large project of dam, bridge, highway, tunnel which is required to use superior epoxy for structural reinforcement.
Strongest epoxy anchoring for all fixing solution
Non-drip formula, ideal for overhead installation and suspension anchorage. Versatile and multi-purpose pure epoxy is longer curing time and more flexible on applications. As global warming, climate suitability and wide temperature applicability are important for chemical anchor development. We equip temperature facilities to simulate different anchoring temperature worldwide and do multiple testing to ensure the quality. The steady characteristic of epoxy is most used in tropical zone.
Technical Data
CHART 1. SOLID SUBSTRATE REBAR INSTALLATION DETAILS
Pressure | Destroy Haul Strength (Kgf/KN) | Safety Haul Strength (Kgf/KN) | Working Standard (mm) | ||||||
Concrete Strength | 4,000 psi | 280 kg/cm2 | 4,000 psi | 280 kg/cm2 | Hole Diameter | Hole Depth | |||
Rebar No. | #3 | (Φ10) | 3,607 | 36.4 | 1,202 | 12.1 | 13 | 90 | |
#4 | (Φ12) | 6,409 | 64.7 | 2,136 | 21.6 | 16 | 125 | ||
#5 | (Φ16) | 9,695 | 97.9 | 3,232 | 32.6 | 20 | 145 | ||
#6 | (Φ20) | 13,655 | 137.9 | 4,552 | 46.0 | 25 | 170 | ||
#7 | (Φ22) | 18,672 | 188.6 | 6,224 | 62.9 | 28 | 200 | ||
#8 | (Φ25) | 24,032 | 242.7 | 8,011 | 80.9 | 32 | 225 | ||
#9 | (Φ28) | 27,364 | 276.4 | 9,121 | 92.1 | 37 | 260 | ||
#10 | (Φ32) | 31,730 | 320.5 | 10,577 | 106.8 | 40 | 290 | ||
#11 | (Φ36) | 35,843 | 362.1 | 11,948 | 120.7 | 42 | 320 | ||
Remarks: | 1. Concrete Strength fc': 280kg/cm2 (4,000 psi) 2. Rebar Strength: #3~#5 fy: 2,800 kgf/cm2, #6~#11 fy= 4,200 kgf/cm2 |
CHART 2. CURING TIME TABLE
Temperature (°C) | Gelling | Full Curing |
5~10 | 1-2 hr. | 90 - 100 hr. |
10~20 | 30-60 min. | 30 - 60 hr. |
20~30 | 14-30 min. | 14 - 22 hr. |
30~40 | 10-20 min. | 6 - 12 hr. |
Please make pull off test for at least 24 hours after full cured. |
CHART 3. FIXING CONSUMPTION PER CARTRIDGE
Anchor Size | Hole Diameter (mm) | Hole Depth (mm) | Number of Fixings |
400ml | |||
M8 | 10 | 80 | 80 |
M10 | 13 | 90 | 42 |
M12 | 16 | 120 | 21 |
M16 | 20 | 145 | 11 |
M20 | 25 | 170 | 6 |
M24 | 28 | 210 | 4 |
M30 | 35 | 270 | 2 |
M36 | 40 | 330 | 1 |
Note: Based on continuous installation without interruptions or nozzle changes. Provided as a guide and will vary with temperature. |
How to use a caulking gun?
1. There is a small trigger on the back of the caulking gun. Press the release trigger with your thumb. This will loosen the long steel rod that runs through the entirety of the frame. 2. Pull the plunger all the way back. 3. Remove the white cap and plug of tube and then screw the mixer nozzle on to the tube. Insert the flat end of the tube into the back of the gun first and put the tube with the mixer nozzle in the front. Pull the handle trigger to move the plungers of caulking gun. Make sure that the plungers of caulking gun are in the center of tube pistons. It is very important to put the tube in the correct position.
- Related Products
High Temperature Epoxy Anchoring
GU-500 650ml 1:1
1:1 ratio 650ml epoxy base injection mortar for anchoring projects in high temperature country.Two...
DetailsEpoxy Chemical Anchor For Varying Weather
GU-500SD 400ml 3:1
GU-500SD 400ml is strongest in all chemical anchoring. Remarkable at cold weather, cracked...
DetailsHigh Strength Epoxy For Concrete Mounting System
GU-500SD 400ml 3:1
High strength epoxy anchoring for aluminum solar panel concrete mounting system. Top-quality...
Details400ml dual component manual caulking gun
#810
#810 caulking gun is a price option for two component epoxy 400ml cartridge with mixing ration...
Details400ml dual component manual caulking gun
G34-400LA
G34-400LA dispenser is heavy-duty and efficient dispensing for 3:1 400ml epoxy adhesive. High...
DetailsMixing nozzle for 1:1 and 3:1 chemical anchor
#818
Static mixer nozzles are applied to adhesive cartridges to mix and dispense two component adhesives....
Details- Files Download
Pure Epoxy Catalogue
Bonding strength table on dry concrete by different hole sizes and depth. Especially for big diameter rebars/threaded rods.
DownloadGU-500 400ml Pure Epoxy Technical Data Sheet
Technical information of anchor design, curing time, edge distance, consumption per hole and installation procedure for GU-500 pure epoxy.
DownloadGU-500 SGS Tensile Strength Testing Report
Pire epoxy pull out strength report for various bolt sizes on 4000psi concrete according to ASTM E488-96 by SGS lab.
DownloadGU-500 AIT Tensile Strength Diameter of 25mm
Pure epoxy tensile test report of rebar fixing for 25mm hole size by Thailand AIT engineering lab. According to local market demands, our products will...
DownloadGU-500 AIT Tensile Strength Diameter of 16mm
Pure epoxy tensile test report of rebar fixing for 16mm hole size by Thailand AIT engineering lab. According to local market demands, our products will...
Download- Gallery
400ml Tropical Epoxy Chemical Anchor | Chemical Anchor Manufacturer - Good Use
Good Use Hardware Co., Ltd. is one of prime 400ml Tropical Epoxy Chemical Anchor | chemical anchors suppliers based in Taiwan since 1997.
Certified chemical anchor solutions with wide selections of adhesive materials including epoxy anchors, concrete anchors, resin anchors for heavy loads in rebar application, diamond drilled holes and anchoring in solid concrete. Non-drip formula, ideal for overhead installation. Chemical anchor bolt and anchor fixings included for efficient, hassle-free, labor-saving chemical anchoring.
Good Use has been offering customers certified tested high-quality chemical anchors. Both with advanced technology and 20 years of experience, Good Use ensures each customer's demands are met.