English 
Professional epoxy resin
Excellent bonding strength for rebar connections and extension anchoring. Bridges, civil structures, retrofitting.
Read MoreCold Weather Epoxy Chemical Anchor
GU-500SD 400ml 3:1
Cracked Concrete Epoxy Chemical Anchoring
GU-500SD 400ML is strongest in all chemical anchoring. Remarkable at cold weather, cracked concrete and water saturated holes.
Ultimate performance for rebar connections, heavy anchoring on dry concrete, wet concrete, cracked and uncracked concrete. Advanced-formula pure epoxy adhesive is workable at wide temperature and crucial anchoring. Quality tested and approved by Germany lab. Non-sag allows for overhead and suspended ceiling application. There is also 585ml available in the range.
Chemical fixing system - Ultimate performance pure epoxy chemical anchor
High-end epoxy mortar for heavy anchoring and critical conditions. In variation case of anchoring work which required higher performance to satisfy and secure the anchoring in dry, wet, uncracked, cracked concrete even in seismic conditions or temperature variation and installation limitation. We tested diverse anchoring condition in ETAG approval lab and with report to compare. Epoxy injectable adhesive anchor is strongest one of bonding fasteners which is growing demands.
Specification of GU-500SD Pure epoxy chemical anchor
- Material: Pure Epoxy
- Model Number: GU-500SD
- Size: 400ml
- Shelf Life: 18 months
- Mixing Ratio: 3:1
- Mixing Color: Orange
- Standard Package: One cartridge with one mixer
- Other Accessory: Mixer, caulking gun, nylon sleeve, air pump, brush
Good Use pure epoxy chemical anchor is suitable to work in wide temperature range
- Workable in low and high temperature
- Can be used in wet concrete hole (Reduction of the recommended loads of 20%)
- Heavy duty loading
- Non-sag for overhead and wall application
- Good performance on uncracked and cracked concrete
- Ideal for deep embedment and large holes
- No shrinkage
- Styrene free, low odor, and LEED tested for VOC (Volatile Organic Compounds)
- No health or safety concern to slow down your work
- ETA in process.
All Good Use chemical anchors have done sustained loads test at IWB lab in Germany
There is no qualified lab with equipment for testing bonding anchor according ETA regulations in Asia. All our items are tested by EAD 330499-00-0601 which is comprehensive plan for both of rebar and threaded rods. We cooperate and consult with leading experts in Europe who dedicate in the fasteners field for more than two decades. We keep improving our research capacity and upgrade international approvals of chemical anchor.
Non-sag chemical epoxy for cold weather anchoring
High strength pure epoxy mortar has ultimate performance for rebar connections and heavy anchoring, even in cold weather. It can use in all year and four seasons as well as easy storage. For extremely cold, you can check vinylester material or contact us for customized formula.
Epoxy for water saturated concrete anchoring
High quality epoxy can meet all fastening purpose and fixing solutions. GU-500SD can install at wet concrete with excellent performance. (Bonding strength will decrease than installed at dry concrete.) We have performance report by leading lab, please feel free to check with us.
Technical Data
CHART 1. SOLID SUBSTRATE REBAR INSTALLATION DETAILS
| Pressure | Destroy Haul Strength (Kgf/KN) | Safety Haul Strength (Kgf/KN) | Working Standard (mm) | ||||||
| Concrete Strength | 4,000 psi | 280 kg/cm2 | 4,000 psi | 280 kg/cm2 | Hole Diameter | Hole Depth | |||
| Rebar No. | ＃3 | (Φ10) | 3,622 | 36.6 | 1,207 | 12.2 | 13 | 90 | |
| ＃4 | (Φ12) | 6,437 | 65.0 | 2,146 | 21.7 | 16 | 125 | ||
| ＃5 | (Φ16) | 9,737 | 98.4 | 3,246 | 32.8 | 20 | 145 | ||
| ＃6 | (Φ20) | 13,715 | 138.5 | 4,572 | 46.2 | 25 | 170 | ||
| ＃7 | (Φ22) | 18,754 | 189.4 | 6,215 | 63.1 | 28 | 200 | ||
| ＃8 | (Φ25) | 24,137 | 243.8 | 8,046 | 81.3 | 32 | 225 | ||
| ＃9 | (Φ28) | 27,484 | 277.6 | 9,161 | 92.5 | 37 | 260 | ||
| ＃10 | (Φ32) | 31,869 | 321.9 | 10,623 | 107.3 | 40 | 290 | ||
| ＃11 | (Φ36) | 36,000 | 363.6 | 12,000 | 121.2 | 42 | 320 | ||
| Remarks: | 1. Concrete Strength fc': 280kg/cm2 (4,000 psi) 2. Rebar Strength: #3~#5 fy: 2,800 kgf/cm2, #6~#11 fy= 4,200 kgf/cm2 | ||||||||
CHART 2. CURING TIME TABLE
| Temperature (°C) | Gelling | Full Curing |
| 5~9 | 2 hr. | 90 hr. |
| 10~14 | 90 min. | 64 hr. |
| 15~19 | 45 min. | 28 hr. |
| 20~29 | 30 min. | 18 hr. |
| 30~39 | 20 min. | 7 hr. |
| 40 | 12 min. | 5 hr. |
| Please make pull off test for at least 24 hours after full cured. | ||
CHART 3. FIXING CONSUMPTION PER CARTRIDGE
| Anchor Size | Hole Diameter (mm) | Hole Depth (mm) | Number of Fixings |
| 400ml | |||
| M8 | 10 | 80 | 80 |
| M10 | 13 | 90 | 42 |
| M12 | 16 | 120 | 21 |
| M16 | 20 | 145 | 11 |
| M20 | 25 | 170 | 6 |
| M24 | 28 | 210 | 4 |
| M30 | 35 | 270 | 2 |
| M36 | 40 | 330 | 1 |
| Note: Based on continuous installation without interruptions or nozzle changes. Provided as a guide and will vary with temperature. | |||
How to use a caulking gun?
1. There is a small trigger on the back of the caulking gun. Press the release trigger with your thumb. This will loosen the long steel rod that runs through the entirety of the frame. 2. Pull the plunger all the way back. 3. Remove the white cap and plug of tube and then screw the mixer nozzle on to the tube. Insert the flat end of the tube into the back of the gun first and put the tube with the mixer nozzle in the front. Pull the handle trigger to move the plungers of caulking gun. Make sure that the plungers of caulking gun are in the center of tube pistons. It is very important to put the tube in the correct position.
- Related Products
400ml Tropical Epoxy Chemical Anchor
GU-500 400ml 3:1
400ml epoxy chemical anchor is 3:1 injectable cartridge for rebar connections and heavy anchoring. Suitable for construction in tropical or summer.Epoxy satisfy the demand for high strength, wide temperature range and nonstandard installation on mostly case. Outstanding tension test by Germany lab according to EAD 330499-00-0601 which is bonded fastener use in concrete with rebar and threaded rod. Epoxy injection mortar can be used indoors or unventilated areas without health and safety concerns. There is also 585ml available in the range.
High Temperature Epoxy Anchoring
GU-500 650ml 1:1
1:1 ratio 650ml epoxy base injection mortar for anchoring projects in high temperature country. Use with universal 1:1 dispensing tools.Two components pure epoxy summer epoxy adhesive is styrene free and low odor to fix machinery, staircases, reinforcement bars, rebars, and threaded rods to concrete, stone, masonry, brick, rock, and other construction fixings. Pure epoxy chemical anchoring system can provide a longer working time and have better flexibility during installation. It can be used indoors or in unventilated areas without health and safety concerns. There is also 600ml available in the range.
High Strength Epoxy For Concrete Mounting System
GU-500SD 400ml 3:1
High strength epoxy anchoring for aluminum solar panel concrete mounting system. Top-quality epoxy can sustain under high heat and heavy loading.Ultimate performance for rebar connections, heavy anchoring on dry concrete, wet concrete, cracked and uncracked concrete. Advanced-formula pure epoxy adhesive is workable at wide temperature and crucial anchoring. Quality tested and approved by Germany lab. Non-sag allows for overhead and suspended ceiling application. There is also 585ml available in the range.
400ml dual component manual caulking gun
#810
#810 caulking gun is a price option for two component epoxy 400ml cartridge with mixing ration 3:1. High value caulking gun with good price. For high viscosity adhesive or using at low temperature, you can refer to G34-400LA dispenser.
400ml dual component manual caulking gun
G34-400LA
G34-400LA dispenser is heavy-duty and efficient dispensing for 3:1 400ml epoxy adhesive. High quality cast aluminum handle for day long comfortable use. Mechanical thrust ratio is 18:1, stroke 5.5mm and maximum force 400kgf (3.9kN). If cartridge ratio is 1:1 & 2:1, please check dispenser G34-400.
Mixing nozzle for 1:1 and 3:1 chemical anchor
#818
Static mixer nozzles are applied to adhesive cartridges to mix and dispense two component adhesives. Good Use Hardware designed the mixing nozzles according to the cartridges to ensure both are fit and able to dispense well-mixed adhesives. #818 mixing nozzle is ideal for Good Use chemical anchor with 1:1 and 3:1 mixing ratio.
400ml Empty Cartridge
400ml
Volume capacity of large 400ml is nylon material. Fast blending two parts of resin after squeezing. Solid red sealing piston ensures well storing two materials in separated chamber.
- Files Download
Pure Epoxy Catalogue
Bonding strength table on dry concrete by different hole sizes and depth. Especially for big diameter rebars/threaded rods.
-
GU-500SD 400ml Pure Epoxy Technical Data Sheet
Technical information of anchor design, curing time, edge distance, consumption per hole and installation procedure for GU-500SD pure epoxy.
- Gallery
Hot Products
High temperature epoxy resin
Suitable working time for use in tropical climate. Fixing diamond drilled holes, deep embedment depths, large diameter rebar.
Read More
Winter concrete epoxy resin
Special winter formula for anchoring at low temperature. For dry, wet, water saturated concrete.
Read More