Cold Weather pure epoxy chemical anchor

Cold Weather pure epoxy chemical anchor

GU-500SD 400ml 3:1

Cracked concrete epoxy chemical anchoring

GU-500SD 400ml is a two-component 3:1 ratio, high strength pure epoxy bonded anchoring system that has ultimate performance for rebar connections, heavy anchoring on dry concrete and wet concrete, and cracked and uncracked concrete. Resin and hardener are dispensed and mixed simultaneously through a static mixer nozzle and used in fixing rebars, threaded rods, machinery, staircases, reinforcement bars to concrete, stone, masonry, brick, rock, and other applications. Advanced-formula pure epoxy fixing adhesive is workable in low temperatures and high temperatures. Non-sag paste allows for overhead and wall application.

GU-500SD 400ml two component pure epoxy resin chemical anchor is styrene free and low odor. It can be used indoors or in unventilated areas without health and safety worries. Available cartridge sizes: 400ml (3:1) and 585ml (3:1) side by side cartridges.

Chemical fixing system - Ultimate performance pure epoxy chemical anchor

High-end epoxy mortar for heavy anchoring and critical conditions. In variation case of anchoring work conditions which required higher performance to satisfy and secure the anchoring in dry, wet, uncracked, cracked concrete even in seismic conditions or temperature limitation. We tested diverse anchoring condition in ETAG approval lab. For GU-500 series, we produce 400ml 3:1 ratio and 650ml 1:1 ratio. Epoxy injectable adhesive anchor is longer curing hybrid formula for longer installation time requirements.



Specification

  • Material: Pure Epoxy
  • Model Number: GU-500SD
  • Size: 400ml
  • Shelf Life: 18 months
  • Mixing Ratio: 3:1
  • Mixing Color: Orange and dark green
  • Standard Package: One cartridge with one mixer
  • Other Accessory: Mixer, caulking gun, nylon sleeve, air pump, brush

Features & Benefits

  • Workable in low temperature and high temperature.
  • Can be used in wet concrete hole (Reduction of the recommended loads of 20%).
  • Heavy duty load.
  • Non-sag for overhead and wall application.
  • Good performance on uncracked and cracked concrete.
  • Ideal for deep embedment and large holes.
  • No shrinkage.
  • Styrene free and low odor. LEED tested for VOC (Volatile Organic Compounds).
  • No health and safety concern to slow down your work.
  • ETA in process.

Non-sag pure epoxy chemical anchor for wall application and for cold weather and high temperature

High strength pure epoxy mortar has ultimate performance for rebar connections and heavy anchoring, even in cold weather and high temperature.

Water saturated concrete test and non-drip test

GU-500SD can install at wet concrete. (Bonding strength will decrease about 20% than installed at dry concrete.)
Non-drip formula, ideal for overhead installation. Versatile and multi-purpose pure epoxy with longer curing time is more flexible on applications.

Technical Data

CHART 1. SOLID SUBSTRATE REBAR INSTALLATION DETAILS

PressureDestroy Haul Strength (Kgf/KN)Safety Haul Strength (Kgf/KN)Working Standard (mm)
Concrete Strength4,000 psi280 kg/cm24,000 psi280 kg/cm2Hole DiameterHole Depth
Rebar No.#3(Φ10)3,62236.61,20712.21390
#4(Φ12)6,43765.02,14621.716125
#5(Φ16)9,73798.43,24632.820145
#6(Φ20)13,715138.54,57246.225170
#7(Φ22)18,754189.46,21563.128200
#8(Φ25)24,137243.88,04681.332225
#9(Φ28)27,484277.69,16192.537260
10(Φ32)31,869321.910,623107.340290
11(Φ36)36,000363.612,000121.242320
Remarks:1. Concrete Strength fc': 280kg/cm2 (4,000 psi)
2. Rebar Strength: #3~#5 fy: 2,800 kgf/cm2, #6~#11 fy= 4,200 kgf/cm2

CHART 2. CURING TIME TABLE

Temperature (°C)GellingFull Curing
5~92 hr.90 hr.
10~1490 min.64 hr.
15~1945 min.28 hr.
20~2930 min.18 hr.
30~3920 min.7 hr.
4012 min.5 hr.
Please make pull out test over 24 hours after full cured.

CHART 3. FIXING CONSUMPTION PER CARTRIDGE

Anchor SizeHole Diameter
(mm)
Hole Depth
(mm)
Number of Fixings
400ml
M8108080
M10139042
M121612021
M162014511
M20251706
M24282104
M30352702
M36403301
Note: Based on continuous installation without interruptions or nozzle changes. Provided as a guide and will vary with temperature.

How to use a caulking gun?

1. There is a small trigger on the back of the caulking gun. Press the release trigger with your thumb. This will loosen the long steel rod that runs through the entirety of the frame. 2. Pull the plunger all the way back. 3. Remove the white cap and plug of tube and then screw the mixer nozzle on to the tube. Insert the flat end of the tube into the back of the gun first and put the tube with the mixer nozzle in the front. Pull the handle trigger to move the plungers of caulking gun. Make sure that the plungers of caulking gun are in the center of tube pistons. It is very important to put the tube in the correct position.



Related Products
  • 400ml tropical resin epoxy chemical anchor - 400ml two part epoxy resin anchoring adhesive
    400ml tropical resin epoxy chemical anchor
    GU-500 400ml 3:1

    GU-500 400ml is a two component 3:1 ratio, pure epoxy based chemical mortar that has excellent performance for rebar connections and heavy anchoring. Resin and hardener are dispensed and mixed simultaneously through a static mixer nozzle and used in fixing rebars, threaded rods, machinery, staircases, reinforcement bars to concrete, stone, masonry, brick, rock, and other applications. Pure epoxy adhesive anchor can provide a longer working time and allow better flexibility during installation.GU-500 400ml two part epoxy resin anchoring adhesive is styrene free and low odor. It can be used indoors or in unventilated areas without health and safety worries. Available cartridge sizes: 400ml (3:1) side by side cartridge and 650ml (1:1) side by side cartridge.


  • 650ml high temperature epoxy resin chemical anchor - 650ml two components pure epoxy summer epoxy adhesive
    650ml high temperature epoxy resin chemical anchor
    GU-500 650ml 1:1

    GU-500 650ml is a two component 1:1 ratio, pure epoxy based chemical anchor that has excellent performance for anchoring threaded rods and rebars. Resin and hardener are dispensed and mixed simultaneously through a static mixing nozzle with an universal caulking gun and to fix machinery, staircases, reinforcement bars, rebars, and threaded rods to concrete, stone, masonry, brick, rock, and other construction fixings. Pure epoxy chemical anchoring system can provide a longer working time and have better flexibility during installation.GU-500 650ml two components pure epoxy summer epoxy adhesive is styrene free and low odor. It can be used indoors or in unventilated areas without health and safety worries. Available cartridge sizes: 400ml (3:1) side by side cartridge and 650ml (1:1) side by side cartridge.


  • High strength epoxy resin for solar panel mounting system - High temperatures dual component pure epoxy chemical anchor
    High strength epoxy resin for solar panel mounting system
    GU-500SD 400ml 3:1

    GU-500SD 400ml is a two component 3:1 ratio, pure epoxy based chemical mortar that has ultimate performance for rebar connections, heavy anchoring on dry concrete and wet concrete, and cracked and uncracked concrete. Resin and hardener are dispensed and mixed simultaneously through a static mixer nozzle and used in fixing rebars, threaded rods, machinery, staircases, reinforcement bars to concrete, stone, masonry, brick, rock, and other applications. Advanced-formula pure epoxy fixing adhesive can stand high temperatures and provide a longer working time but fast full curing time. It allows better flexibility during installation. Non-sag paste allows for overhead and wall application. Also good for installing solar panels in hot conditions.GU-500SD 400ml dual component epoxy resin chemical anchoring system is styrene free and low odor. It can be used indoors or in unventilated areas without health and safety worries. Available cartridge sizes: 400ml (3:1) and 585ml (3:1) side by side cartridges.


  • 400ml dual component manual caulking gun - Cartridge guns - #810
    400ml dual component manual caulking gun
    #810

    Double-gripping plate technology, increased efficiency, quick job done easier, neater and with less hassle, 400ml cartridge longer dispensing tool, ergonomically designed composite construction.


  • 400ml dual component manual caulking gun - Cartridge guns - G34-400LA
    400ml dual component manual caulking gun
    G34-400LA

    Heavy-duty for professional application caulking gun is used as a tool for squeezing adhesive out from cartridges. Insert 400ml capacity into applicator gun. Increased durability, ergonomic handgrip to keep your wrist in natural and balanced position.


  • Mixing nozzles - Static mixer 818
    Mixing nozzles
    #818

    The 818 series static mixers are used to automatically mix two part adhesives during application. Can be used for 400ml and 650ml cartridges, designed for mixing ratios 1:1 and 3:1. Mixers are made of high grade polypropylene and disposable.


  • 400ml Empty Cartridge - 400ml Empty Cartridge
    400ml Empty Cartridge
    400ml

    Volume capacity of large 400ml is nylon material. Fast blending two parts of resin after squeezing. Solid red sealing piston ensures well storing two materials in separated chamber.



Files Download

Gallery

Menu

Best Sale

Cold Weather pure epoxy chemical anchor | Chemical Anchor Manufacturer - Good Use

Good Use Hardware Co., Ltd. is one of prime Cold Weather pure epoxy chemical anchor | chemical anchors suppliers based in Taiwan since 1997.

Certified chemical anchor solutions with wide selections of adhesive materials including epoxy anchors, concrete anchors, resin anchors for heavy loads in rebar application, diamond drilled holes and anchoring in solid concrete. Non-drip formula, ideal for overhead installation. Chemical anchor bolt and anchor fixings included for efficient, hassle-free, labor-saving chemical anchoring.

Good Use has been offering customers certified tested high-quality chemical anchors. Both with advanced technology and 20 years of experience, Good Use ensures each customer's demands are met.


Hot Products

Professional epoxy resin

Professional epoxy resin

Excellent bonding strength for rebar connections and extension anchoring. Bridges, civil structures, retrofitting.

Read More
High temperature epoxy resin

High temperature epoxy resin

Suitable working time for use in tropical climate. Fixing diamond drilled holes, deep embedment depths, large diameter rebar.

Read More
Winter concrete epoxy resin

Winter concrete epoxy resin

Special winter formula for anchoring at low temperature. For dry, wet, water saturated concrete.

Read More