Cold weather pure epoxy chemical anchor

Cold weather pure epoxy chemical anchor

2015/01/01
Super high duty chemical anchor GU-500SD 400ml
Super high duty chemical anchor GU-500SD 400ml

GU-500SD 400ml is designed for higher performance demands. With upgraded formula allows winter applications. With excellent performance in winter season, it is particularly for higher strength requirements. Styrene free low odor pure epoxy resin based chemical injection anchoring system can work in water saturated and damp environment.

Suitable for wet concrete, high chemical resistance, universal solution and heavier loads. Offer excellent adhesion to steel and concrete and has the highest performance and load values of all our systems. Used widely for loads in colder situations due to a low temperature range.

Specification

  • Model name: GU-500SD
  • Material: Pure Epoxy
  • Shelf life: 18 months
  • Size: 400ml
  • Ratio: 3:1
  • Mixed color: Dark Green
  • Package: One cartridge with one mixer

Features & Benefits

  • Excellent performance for winter season, no freeze in winter season. Cold weather formula.
  • Higher strength. Extra heavy duty bond and high load capacity.
  • Extra heavy duty bond and high load capacity.
  • Excellent adhesion on dry, wet holes.
  • Styrene free and low odor with VOC(Volatile Organic Compounds).
  • Non-sag.
  • ICC certification is pending.

Application

  • Anchoring in large hole diameter and deep holes.
  • Wet concrete or damp environment and where heavy load are required.
  • Special formula for winter season installation.

Cold weather application and heavy load

GU-500SD is designed for lower temperature and wet concrete. Our engineers have ability to design special formula to fit with your demands.

GU-500SD is upgraded formula for higher performance requirement. Heavy load for civil construction and infrastructure.

Water saturated concrete test and non-drip test

GU-500SD can install at wet concrete. (Bonding strength will decrease about 20% than installed at dry concrete.)
Non-drip formula, ideal for overhead installation. Versatile and multi-purpose pure epoxy with longer curing time is more flexible on applications.

CHART 1. SOLID SUBSTRATE REBAR INSTALLATION DETAILS

Pressure Destroy Haul Strength (Kgf/KN) Safety Haul Strength (Kgf/KN) Working Standard (mm)
Concrete Strength 4,000 psi 280 kg/cm2 4,000 psi 280 kg/cm2 Hole Diameter Hole Depth
Rebar No. #3 (Φ10) 3,622 36.6 1,207 12.2 13 90
#4 (Φ12) 6,437 65.0 2,146 21.7 16 125
#5 (Φ16) 9,737 98.4 3,246 32.8 20 145
#6 (Φ20) 13,715 138.5 4,572 46.2 25 170
#7 (Φ22) 18,754 189.4 6,215 63.1 28 200
#8 (Φ25) 24,137 243.8 8,046 81.3 32 225
#9 (Φ28) 27,484 277.6 9,161 92.5 37 260
10 (Φ32) 31,869 321.9 10,623 107.3 40 290
11 (Φ36) 36,000 363.6 12,000 121.2 42 320
Remarks: 1. Concrete Strength fc': 280kg/cm2 (4,000 psi)
2. Rebar Strength: #3~#5 fy: 2,800 kgf/cm2, #6~#11 fy= 4,200 kgf/cm2

CHART 2. CURING TIME TABLE

Temperature (°C) Gelling Full Curing
5~9 2 hr. 90 hr.
10~14 90 min. 64 hr.
15~19 45 min. 28 hr.
20~29 30 min. 18 hr.
30~39 20 min. 7 hr.
40 12 min. 5 hr.
Please make pull out test over 24 hours after full cured.

CHART 3. FIXING CONSUMPTION PER CARTRIDGE

Anchor Size Hole Diameter
(mm)
Hole Depth
(mm)
Number of Fixings
400ml
M8 10 80 80
M10 13 90 42
M12 16 120 21
M16 20 145 11
M20 25 170 6
M24 28 210 4
M30 35 270 2
M36 40 330 1
Note: Based on continuous installation without interruptions or nozzle changes. Provided as a guide and will vary with temperature.

Photo Gallery

Products
  • 400ml Tropical Epoxy Chemical Anchor - 400ml two part epoxy resin anchoring adhesive
    400ml Tropical Epoxy Chemical Anchor
    GU-500 400ml 3:1

    400ml epoxy chemical anchor is 3:1 injectable cartridge for rebar connections and heavy anchoring. Suitable for construction in tropical or summer. Epoxy satisfy the demand for high strength, wide temperature range and nonstandard installation on mostly case. Outstanding tension test by Germany lab according to EAD 330499-00-0601 which is bonded fastener use in concrete with rebar and threaded rod. Epoxy injection mortar can be used indoors or unventilated areas without health and safety concerns. There is also 585ml available in the range.


  • High Temperature Epoxy Anchoring - 650ml two components pure epoxy summer epoxy adhesive
    High Temperature Epoxy Anchoring
    GU-500 650ml 1:1

    1:1 ratio 650ml epoxy base injection mortar for anchoring projects in high temperature country. Use with universal 1:1 dispensing tools. Two components pure epoxy summer epoxy adhesive is styrene free and low odor to fix machinery, staircases, reinforcement bars, rebars, and threaded rods to concrete, stone, masonry, brick, rock, and other construction fixings. Pure epoxy chemical anchoring system can provide a longer working time and have better flexibility during installation. It can be used indoors or in unventilated areas without health and safety concerns. There is also 600ml available in the range.


  • High Strength Epoxy For Concrete Mounting System - High temperatures dual component pure epoxy chemical anchor
    High Strength Epoxy For Concrete Mounting System
    GU-500SD 400ml 3:1

    High strength epoxy anchoring for aluminum solar panel concrete mounting system. Top-quality epoxy can sustain under high heat and heavy loading. Ultimate performance for rebar connections, heavy anchoring on dry concrete, wet concrete, cracked and uncracked concrete. Advanced-formula pure epoxy adhesive is workable at wide temperature and crucial anchoring. Quality tested and approved by Germany lab. Non-sag allows for overhead and suspended ceiling application. There is also 585ml available in the range.


  • 400ml dual component manual caulking gun - Cartridge guns - #810
    400ml dual component manual caulking gun
    #810

    #810 caulking gun is a price option for two component epoxy 400ml cartridge with mixing ration 3:1. High value caulking gun with good price. For high viscosity adhesive or using at low temperature, you can refer to G34-400LA dispenser.


  • 400ml dual component manual caulking gun - Cartridge guns - G34-400LA
    400ml dual component manual caulking gun
    G34-400LA

    G34-400LA dispenser is heavy-duty and efficient dispensing for 3:1 400ml epoxy adhesive. High quality cast aluminum handle for day long comfortable use. Mechanical thrust ratio is 18:1, stroke 5.5mm and maximum force 400kgf (3.9kN). If cartridge ratio is 1:1 & 2:1, please check dispenser G34-400.


  • Mixing nozzle for 1:1 and 3:1 chemical anchor - Static mixer for 1:1 and 3:1 chemical anchor
    Mixing nozzle for 1:1 and 3:1 chemical anchor
    #818

    Static mixer nozzles are applied to adhesive cartridges to mix and dispense two component adhesives. Good Use Hardware designed the mixing nozzles according to the cartridges to ensure both are fit and able to dispense well-mixed adhesives. #818 mixing nozzle is ideal for Good Use chemical anchor with 1:1 and 3:1 mixing ratio.


  • 400ml Empty Cartridge - 400ml Empty Cartridge
    400ml Empty Cartridge
    400ml

    Volume capacity of large 400ml is nylon material. Fast blending two parts of resin after squeezing. Solid red sealing piston ensures well storing two materials in separated chamber.




Menu

Best Sale

Good Use Cold weather pure epoxy chemical anchor Introduction

Good Use Hardware Co., Ltd. is Taiwan supplier and manufacturer in producing chemical anchor in the industry. Good Use has been offering our customers high quality injection cartridge, chemical mortar, chemical anchor, anchor capsule, polyester resin,vinylester resin, epoxy acrylate resin, pure epoxy resin, styrene free resin, mixer nozzle, static mixer, plastic mixer, injection gun, caulking gun,dispenser,dispensing tool, dispensing gun, resin anchor since 1997. With both advanced technology and 20 years experience, Good Use always make sure to meet each customer's demand.


Hot Products

Professional epoxy resin

Professional epoxy resin

Excellent bonding strength for rebar connections and extension anchoring. Bridges, civil structures, retrofitting.

Read More
High temperature epoxy resin

High temperature epoxy resin

Suitable working time for use in tropical climate. Fixing diamond drilled holes, deep embedment depths, large diameter rebar.

Read More
Winter concrete epoxy resin

Winter concrete epoxy resin

Special winter formula for anchoring at low temperature. For dry, wet, water saturated concrete.

Read More