Cold weather pure epoxy chemical anchor

Cold weather pure epoxy chemical anchor

2015/01/01
Super high duty chemical anchor GU-500SD 400ml
Super high duty chemical anchor GU-500SD 400ml

GU-500SD 400ml is designed for higher performance demands. With upgraded formula allows winter applications. With excellent performance in winter season, it is particularly for higher strength requirements. Styrene free low odor pure epoxy resin based chemical injection anchoring system can work in water saturated and damp environment.

Suitable for wet concrete, high chemical resistance, universal solution and heavier loads. Offer excellent adhesion to steel and concrete and has the highest performance and load values of all our systems. Used widely for loads in colder situations due to a low temperature range.

Specification

  • Model name: GU-500SD
  • Material: Pure Epoxy
  • Shelf life: 18 months
  • Size: 400ml
  • Ratio: 3:1
  • Mixed color: Dark Green
  • Package: One cartridge with one mixer

Features & Benefits

  • Excellent performance for winter season, no freeze in winter season. Cold weather formula.
  • Higher strength. Extra heavy duty bond and high load capacity.
  • Extra heavy duty bond and high load capacity.
  • Excellent adhesion on dry, wet holes.
  • Styrene free and low odor with VOC(Volatile Organic Compounds).
  • Non-sag.
  • ICC certification is pending.

Application

  • Anchoring in large hole diameter and deep holes.
  • Wet concrete or damp environment and where heavy load are required.
  • Special formula for winter season installation.

Cold weather application and heavy load

GU-500SD is designed for lower temperature and wet concrete. Our engineers have ability to design special formula to fit with your demands.

GU-500SD is upgraded formula for higher performance requirement. Heavy load for civil construction and infrastructure.

Water saturated concrete test and non-drip test

GU-500SD can install at wet concrete. (Bonding strength will decrease about 20% than installed at dry concrete.)
Non-drip formula, ideal for overhead installation. Versatile and multi-purpose pure epoxy with longer curing time is more flexible on applications.

CHART 1. SOLID SUBSTRATE REBAR INSTALLATION DETAILS

PressureDestroy Haul Strength (Kgf/KN)Safety Haul Strength (Kgf/KN)Working Standard (mm)
Concrete Strength4,000 psi280 kg/cm24,000 psi280 kg/cm2Hole DiameterHole Depth
Rebar No.#3(Φ10)3,62236.61,20712.21390
#4(Φ12)6,43765.02,14621.716125
#5(Φ16)9,73798.43,24632.820145
#6(Φ20)13,715138.54,57246.225170
#7(Φ22)18,754189.46,21563.128200
#8(Φ25)24,137243.88,04681.332225
#9(Φ28)27,484277.69,16192.537260
10(Φ32)31,869321.910,623107.340290
11(Φ36)36,000363.612,000121.242320
Remarks:1. Concrete Strength fc': 280kg/cm2 (4,000 psi)
2. Rebar Strength: #3~#5 fy: 2,800 kgf/cm2, #6~#11 fy= 4,200 kgf/cm2

CHART 2. CURING TIME TABLE

Temperature (°C)GellingFull Curing
5~92 hr.90 hr.
10~1490 min.64 hr.
15~1945 min.28 hr.
20~2930 min.18 hr.
30~3920 min.7 hr.
4012 min.5 hr.
Please make pull out test over 24 hours after full cured.

CHART 3. FIXING CONSUMPTION PER CARTRIDGE

Anchor SizeHole Diameter
(mm)
Hole Depth
(mm)
Number of Fixings
400ml
M8108080
M10139042
M121612021
M162014511
M20251706
M24282104
M30352702
M36403301
Note: Based on continuous installation without interruptions or nozzle changes. Provided as a guide and will vary with temperature.

Photo Gallery

Products
  • 400ml Tropical Epoxy Chemical Anchor - 400ml two part epoxy resin anchoring adhesive
    400ml Tropical Epoxy Chemical Anchor
    GU-500 400ml 3:1

    400ml epoxy chemical anchor is 3:1 injectable cartridge for rebar connections and heavy anchoring. Suitable for construction in tropical or summer.Epoxy satisfy the demand for high strength, wide temperature range and nonstandard installation on mostly case. Outstanding tension test by Germany lab according to EAD 330499-00-0601 which is bonded fastener use in concrete with rebar and threaded rod. Epoxy injection mortar can be used indoors or unventilated areas without health and safety concerns. There is also 585ml available in the range.


  • High Temperature Epoxy Anchoring - 650ml two components pure epoxy summer epoxy adhesive
    High Temperature Epoxy Anchoring
    GU-500 650ml 1:1

    1:1 ratio 650ml epoxy base injection mortar for anchoring projects in high temperature country. Use with universal 1:1 dispensing tools.Two components pure epoxy summer epoxy adhesive is styrene free and low odor to fix machinery, staircases, reinforcement bars, rebars, and threaded rods to concrete, stone, masonry, brick, rock, and other construction fixings. Pure epoxy chemical anchoring system can provide a longer working time and have better flexibility during installation. It can be used indoors or in unventilated areas without health and safety concerns. There is also 600ml available in the range.


  • High Strength Epoxy For Concrete Mounting System - High temperatures dual component pure epoxy chemical anchor
    High Strength Epoxy For Concrete Mounting System
    GU-500SD 400ml 3:1

    High strength epoxy anchoring for aluminum solar panel concrete mounting system. Top-quality epoxy can sustain under high heat and heavy loading.Ultimate performance for rebar connections, heavy anchoring on dry concrete, wet concrete, cracked and uncracked concrete. Advanced-formula pure epoxy adhesive is workable at wide temperature and crucial anchoring. Quality tested and approved by Germany lab. Non-sag allows for overhead and suspended ceiling application. There is also 585ml available in the range.


  • 400ml dual component manual caulking gun - Cartridge guns - #810
    400ml dual component manual caulking gun
    #810

    Double-gripping plate technology, increased efficiency, quick job done easier, neater and with less hassle, 400ml cartridge longer dispensing tool, ergonomically designed composite construction.


  • 400ml dual component manual caulking gun - Cartridge guns - G34-400LA
    400ml dual component manual caulking gun
    G34-400LA

    Heavy-duty for professional application caulking gun is used as a tool for squeezing adhesive out from cartridges. Insert 400ml capacity into applicator gun. Increased durability, ergonomic handgrip to keep your wrist in natural and balanced position.


  • Mixing nozzles - Static mixer 818
    Mixing nozzles
    #818

    The 818 series static mixers are used to automatically mix two part adhesives during application. Can be used for 400ml and 650ml cartridges, designed for mixing ratios 1:1 and 3:1. Mixers are made of high grade polypropylene and disposable.


  • 400ml Empty Cartridge - 400ml Empty Cartridge
    400ml Empty Cartridge
    400ml

    Volume capacity of large 400ml is nylon material. Fast blending two parts of resin after squeezing. Solid red sealing piston ensures well storing two materials in separated chamber.




Menu

Best Sale

Good Use Cold weather pure epoxy chemical anchor Introduction

Good Use Hardware Co., Ltd. is Taiwan supplier and manufacturer in producing chemical anchor in the industry. Good Use has been offering our customers high quality injection cartridge, chemical mortar, chemical anchor, anchor capsule, polyester resin,vinylester resin, epoxy acrylate resin, pure epoxy resin, styrene free resin, mixer nozzle, static mixer, plastic mixer, injection gun, caulking gun,dispenser,dispensing tool, dispensing gun, resin anchor since 1997. With both advanced technology and 20 years experience, Good Use always make sure to meet each customer's demand.


Hot Products

Professional epoxy resin

Professional epoxy resin

Excellent bonding strength for rebar connections and extension anchoring. Bridges, civil structures, retrofitting.

Read More
High temperature epoxy resin

High temperature epoxy resin

Suitable working time for use in tropical climate. Fixing diamond drilled holes, deep embedment depths, large diameter rebar.

Read More
Winter concrete epoxy resin

Winter concrete epoxy resin

Special winter formula for anchoring at low temperature. For dry, wet, water saturated concrete.

Read More