345ml anchoring system polyester chemical anchor | Chemical Anchor Manufacturer - Good Use
Good Use Hardware Co., Ltd. is one of prime 345ml anchoring system polyester chemical anchor | chemical anchors suppliers based in Taiwan since 1997. Certified chemical anchor solutions with wide selections of adhesive materials including epoxy anchors, concrete anchors, resin anchors for heavy loads in rebar application, diamond drilled holes and anchoring in solid concrete. Non-drip formula, ideal for overhead installation. Chemical anchor bolt and anchor fixings included for efficient, hassle-free, labor-saving chemical anchoring. 345ml polyester chemical anchor is middle size and more flexible in market. It needs a specific caulking gun to extrude the mortar.Polyester with styrene chemical anchor is classic and most popular material for general purpose. Economical price satisfies most fixing demands of medium loads. Applicable for rebar doweling, handrail, facade, pipelines, awnings, brackets. All of our chemical anchor had tested and approved in Germany according to EAD 330499-00-0601. There are also 150ml, 235ml, 360ml and 380ml available in the range.
345ml anchoring system polyester chemical anchor
GU-100 345ml
Concrete extension polyester resin chemical fixing
345ml polyester chemical anchor is middle size and more flexible in market. It needs a specific caulking gun to extrude the mortar.
Polyester with styrene chemical anchor is classic and most popular material for general purpose. Economical price satisfies most fixing demands of medium loads. Applicable for rebar doweling, handrail, facade, pipelines, awnings, brackets. All of our chemical anchor had tested and approved in Germany according to EAD 330499-00-0601. There are also 150ml, 235ml, 360ml and 380ml available in the range.
Chemical fixing system - Economical polyester with styrene
Easy setting injectable mortar for anchoring in concrete and for rebar connections. Market-oriented that we offer various volumes and cartridge design for all kinds of consumption. 150ml is co-axial cartridge with mixing ratio 10:1 for standard silicone gun which no extra dispensing tool required and satisfied one time using. 235ml is best selling size in Taiwan. Middle size of 345ml and 360ml are most popular for flexible applications. 380ml co-axial is economic volume for construction. Polyester injectable adhesive is best choice for beginner to meet mostly basic fixing demands.
Specification of GU-100 Polyester chemical anchor
- Material: Polyester with styrene
- Model Number: GU-100
- Size: 345ml
- Shelf Life: 12 months
- Mixing Ratio: 10:1
- Mixed Color: Gray
- Standard Package: one cartridge with one mixer
- Other Accessory: Mixer, caulking gun, nylon sleeve, air pump, brush
Good Use polyester chemical anchor is suitable for vertical and horizontal fixings
- Loading strength approved by Germany lab
- No expansion effect and allowing fixing close to the edges
- Low level of volatile organic compounds (VOC) according to LEED test
- Cost-efficient and long durability
- Suitable for vertical or horizontal fixings
- Medium loads for general anchoring purpose
- Private label or customized design by demands
All Good Use chemical anchors have done sustained loads test at IWB lab in Germany
There is no qualified lab with equipment for testing bonding anchor according ETA regulations in Asia. All our items are tested by EAD 330499-00-0601 which is comprehensive plan for both of rebar and threaded rods. We cooperate and consult with leading experts in Europe who dedicate in the fasteners field for more than two decades. We keep improving our research capacity and upgrade international approvals of chemical anchor.
Anchoring hole depth checking
Sustained loads tested in IWB
Displacement testing under seismic
Polyester for professional fixture, market-oriented and cost-effective formula
Railing on terrace and balcony required firmly fixing for long time. Chemical anchor secure high strength railing fixing. It also can widely apply to general fixture of awnings, brackets and suspension work. For general application of fixture, polyester is acceptable price and satisfied performance for most demands. It's common, mature item and widely apply to construction.
Handrail chemical injection anchoring system
Technical Data
CHART 1. SOLID SUBSTRATE REBAR INSTALLATION DETAILS
| Pressure | Destroy Haul Strength (Kgf/KN) | Safety Haul Strength (Kgf/KN) | Working Standard (mm) | ||||||
|---|---|---|---|---|---|---|---|---|---|
| Concrete Strength | 4,000 psi | 280 kg/cm2 | 4,000 psi | 280 kg/cm2 | Hole Diameter | Hole Depth | |||
Rebar | ＃3 | (Φ10) | 3,070 | 31.0 | 1,023 | 10.0 | 13 | 90 | |
| ＃4 | (Φ12) | 4,920 | 49.7 | 1,640 | 16.6 | 16 | 120 | ||
| ＃5 | (Φ16) | 6,800 | 68.7 | 2,267 | 22.9 | 20 | 145 | ||
| ＃6 | (Φ20) | 7,708 | 77.9 | 2,569 | 25.9 | 25 | 170 | ||
| ＃7 | (Φ22) | 9,440 | 95.4 | 3,147 | 31.8 | 28 | 200 | ||
| ＃8 | (Φ25) | 13,620 | 137.6 | 4,540 | 45.9 | 32 | 225 | ||
| ＃9 | (Φ29) | 20,340 | 205.6 | 6,780 | 68.5 | 37 | 250 | ||
| ＃10 | (Φ30) | 26,620 | 269.0 | 8,873 | 89.6 | 40 | 290 | ||
| Remarks: | 1. Concrete Strength fc': 280kg/cm2 (4,000 psi) 2. Rebar Strength: #3~#5 fy: 2,800 kgf/cm2, #6~#11 fy= 4,200 kgf/cm2 | ||||||||
CHART 2. CURING TIME TABLE
| Temperature (°C) | Gelling | Full Curing |
| 0~5 | 8 hr. | |
| 5~10 | 40 min. | 7 hr. |
| 10~20 | 30 min. | 6 hr. |
| 20~30 | 8 min. | 3 hr. |
| 30~40 | 3 min. | 2 hr. |
| Please make pull off test for at least 24 hours after full cured. | ||
CHART 3. FIXING CONSUMPTION PER CARTRIDGE
| Anchor Size | Hole Diameter (mm) | Hole Depth (mm) | Number of Fixings | ||||
| 150ml | 235ml | 345ml | 360ml | 380ml | |||
| M8 | 10 | 80 | 30 | 47 | 69 | 72 | 76 |
| M10 | 12 | 90 | 18 | 29 | 42 | 44 | 47 |
| M12 | 14 | 110 | 11 | 17 | 25 | 27 | 28 |
| M16 | 18 | 125 | 6 | 9 | 14 | 14 | 15 |
| M20 | 24 | 170 | 2 | 4 | 6 | 6 | 6 |
| M24 | 28 | 210 | 1 | 2 | 3 | 4 | 4 |
| M30 | 35 | 270 | 1 | 1 | 2 | 2 | 2 |
| M36 | 40 | 330 | X | 1 | 1 | 1 | 1 |
| Note: Based on continuous installation without interruptions or nozzle changes. Provided as a guide and will vary with temperature. | |||||||
How to install chemical anchor?
1. Drill the specific hole size and depth. 2. Clean dust with brush and air blow pump. 3. Press out unmixed resin which can't be used. 4. Inject mixed resin into drilled hole and fill from the bottom. 5. Insert rebar/threaded rod/steel strip. Curing time refer to TDS. Don't touch until full curing. The installation process will affect the bonding performance of chemical anchors.
- Related Products
345ml anchor system epoxy acrylate chemical anchor
GU-600 345ml
345ml bonded resin is popular middle size for most construction consumption. Epoxy acrylate...
Details
345ml injectable vinylester chemical anchor
GU-2000 345ml
Approved vinylester mortar is for fixing threaded rod and rebar on non-cracked concrete for structure...
Details
150ml anchoring system polyester chemical anchor
GU-100 150ml
150ml polyester chemical anchor is the smallest volume in the range. It is available to work...
Details
235ml anchoring system polyester chemical anchor
GU-100 235ml
Small volume 235ml side by side polyester chemical anchor is easy use for small area and most...
Details
360ml anchoring system polyester chemical anchor
GU-100 360ml
360ml polyester chemical anchor is middle size and more flexible in market. It needs a specific...
Details
380ml anchoring system polyester chemical anchor
GU-100 380ml
380ml polyester co-axial cartridge also called 400ml or 410ml in the market and is popular...
Details
360ml two component caulking gun
#811N
#811N is multi compatible dispenser for 300/345/360ml adhesive cartridge and some customers...
Details
Mixing nozzle for 10:1 chemical anchor
#817
Mixing nozzle is designed to mix and dispense two-component chemical anchor at the same time....
Details- Files Download
Polyester Resin with Styrene Catalogue
Bonding strength chart on dry concrete by different hole size and depth. Economic polyester for all fixing demands.
DownloadGU-100 Polyester Resin with Styrene Technical Data Sheet
Technical information of anchor design, curing time, edge distance, consumption per hole and installation procedure.
DownloadGU-100 SGS Tensile Strength Testing Report
Polyester pull out strength report for diverse bolt size on 4000psi concrete according to ASTM E488-96 by SGS lab.
DownloadGU-100 AIT Tensile Strength Diameter of 25mm
Polyester tensile test report of rebar fixing for 25mm hole size by Thailand AIT engineering lab. According to local market demands, our products will...
DownloadGU-100 AIT Tensile Strength Diameter of 16mm
Polyester tensile test report of rebar fixing for 16mm hole size by Thailand AIT engineering lab. According to local market demands, our products will...
Download- Gun Installation Guide
1) Caulking gun for 345ml injection cartridge. 2. Remove the screw cap. 
3) Screw on mixer nollze. 4) Put the cartridge into the caulking gun and start construction. 
- Gallery
345ml cartridge chemical polyester styrene
345ml injection cartridge chemical anchor tube
345ml side by side resin anchor cartridge
345ml polyester, epoxy acrylate, vinylester styrene free
Polyester styrene for steel rebar
Download Popular Products
345ml anchoring system polyester chemical anchor | Chemical Anchor Manufacturer - Good Use
Good Use Hardware Co., Ltd. is one of prime 345ml anchoring system polyester chemical anchor | chemical anchors suppliers based in Taiwan since 1997.
Certified chemical anchor solutions with wide selections of adhesive materials including epoxy anchors, concrete anchors, resin anchors for heavy loads in rebar application, diamond drilled holes and anchoring in solid concrete. Non-drip formula, ideal for overhead installation. Chemical anchor bolt and anchor fixings included for efficient, hassle-free, labor-saving chemical anchoring.
Good Use has been offering customers certified tested high-quality chemical anchors. Both with advanced technology and 20 years of experience, Good Use ensures each customer's demands are met.