Steel brush for hole cleaning | Sold in 40 Countries Injectable Chemical Anchors Manufacturer Since 1997 | Good Use

Steel brush for hole cleaning / Injectable chemical anchor factory establishes in Taiwan. With 25 years experience in producing injection mortar and export to over 40 countries.

Steel brush for hole cleaning - Steel brush for hole cleaning
  • Steel brush for hole cleaning - Steel brush for hole cleaning

Steel brush for hole cleaning

Steel Brush

Ideal for removing drill dust in concrete and masonry holes

Steel brush for drill hole cleaning is an important part for chemical anchor installation. It is commonly used with a blow out pump. After drilling, using the appropriately sized brush, insert brush to the bottom of the hole with twisting/rotating and push/pull motion to remove extra dust and debris. Cleaning the drilled holes properly to make sure both chemical anchor and rebars, rods, studs and screws could work well to provide high bonding strength. Good Use Hardware offer 6 different sizes of steel brush for your selection.

Specification Of Steel Brush

● Item No.: TIS-14 / TIS-16 / TIS-20 / TIS-26 / TIS-30 / TIS-40
● Suitable for hole diameter: 14-40mm
● Working length of brush: 80-100mm
● Overall length: 250-410mm
● Material: Wire Steel

How to install chemical anchor?

1. Drill the specific diameter and depth. 2. Clean dust with brush and air blow pump. 3. Press out unmixed mortar which cannot be used. 4. Inject mixed mortar from the bottom of the drilled hole. 5. Insert and rotate the rebar/threaded rod/steel strip into the drilled hole. Don't touch the insert until full curing. Curing time refer to our TDS. The installation process will affect the bonding performance of chemical anchors.

Related Products
Blow-Out pump for hole cleaning - Small blow pump
Blow-Out pump for hole cleaning
BAP-S

BAP-S blow-out pump is a solution for all kinds of sealant and epoxy installation. The air pressure...

Details
Blow-Out pump for hole cleaning - Medium blow pump
Blow-Out pump for hole cleaning
BAP-M

BAP-M blow-out pump is used for blow out the dust and debris from the drilled holes. With the 360°...

Details
Blow-Out pump for hole cleaning - Long blow pump
Blow-Out pump for hole cleaning
BAP-L

BAP-L blow-out pump is used for cleaning the dust in the drilled hole. BAP-L is biggest one in the range....

Details
Gallery

Steel brush for hole cleaning - Ideal for removing drill dust in concrete and masonry holes | Sold in 40 Countries Injectable Chemical Anchors Manufacturer Since 1997 | Good Use

Located in Taiwan since 1997, Good Use Hardware Co., Ltd. has been an injectable adhesive mortars and anchors manufacturer. Their main products, including Steel brush for hole cleaning, injection cartridges, chemical mortars, chemical anchors, anchor capsules, polyester resins and vinylester resins, which are sold in 40 countries.

Reputable factory of chemical anchor in Taiwan produces the widest range of adhesive anchor solutions for your concrete anchoring applications. with more than 15 years manufacturing experience for Chemical Anchor System, Injection Cartridge System, Construction Chemical Mortar and more. Certified chemical anchor solutions with wide selections of adhesive materials including epoxy anchors, concrete anchors, resin anchors for heavy loads in rebar application, diamond drilled holes and anchoring in solid concrete. Non-drip formula, ideal for overhead installation. Chemical anchor bolt and anchor fixings included for efficient, hassle-free, labor-saving chemical anchoring.

Good Use has been offering customers certified and tested high-quality chemical anchors, both with advanced technology and 25 years of experience, Good Use ensures each customer's demands are met.