Nylon sleeve for hollow brick fixing - The Ideal Companion for Chemical Anchors | Sold in 40 Countries Injectable Chemical Anchors Manufacturer Since 1997 | Good Use
Good Use is a high-quality injection cartridge, chemical mortar, chemical anchor, anchor capsule, polyester resin,vinylester resin, epoxy acrylate resin, pure epoxy resin, styrene free resin, mixer nozzle, static mixer, plastic mixer, injection gun, caulking gun,dispenser,dispensing tool, dispensing gun, resin anchor manufacturer from Taiwan. Reputable factory of chemical anchor in Taiwan produces the widest range of adhesive anchor solutions for your concrete anchoring applications. An injectable chemical anchor factory has been established in Taiwan, boasting more than 28 years of experience in manufacturing chemical anchor (injection mortar) and exporting to more than 45 countries. since 1997.
Nylon sleeve for hollow brick fixing - The Ideal Companion for Chemical Anchors
Fixing into hollow or perforated bricks can be challenging. Traditional expansion anchors often cause cracks or fail to achieve reliable load performance. To solve this, Good Use Hardware offers specially designed nylon sleeves that, when combined with chemical anchors, create strong and expansion-free anchoring points in hollow structures.
How the Nylon Sleeve Works
Once inserted into the drilled hole, the nylon sleeve allows the chemical anchor resin (e.g., GU-100 polyester chemical anchor or GU-500 injection epoxy anchor) to flow evenly through its openings and fill the voids inside the brick. After curing, the resin and sleeve form a solid adhesive plug that transfers load safely without stressing the brittle masonry. This method is ideal for hollow and perforated bricks, lightweight blocks, and other hollow masonry, as well as for applications where expansion anchors are not suitable.
Nylon Sleeve Installation Guide - Ensure a Safe and Secure Anchor
Follow this step-by-step guide to correctly install the nylon sleeve and achieve a strong, reliable anchoring point. For visual reference, check the accompanying installation video.
1. Select the Correct Sleeve Size
Choose a nylon sleeve that matches your threaded rod or rebar diameter (e.g., Ø15×85 mm, Ø16×85 mm, Ø20×85 mm). Using the correct size ensures proper resin coverage and anchor strength.
2. Drill the Hole
Drill a hole to the recommended diameter and depth for your sleeve. Thoroughly clean the hole using a brush and an air blower to remove dust and debris, ensuring maximum adhesion.
3. Insert the Nylon Sleeve
Push the sleeve into the hole until it sits flush with the surface. Confirm that the sleeve is fully seated and straight to prevent misalignment.
4. Inject the Chemical Anchor Resin
Fill the sleeve with resin from the bottom up, carefully avoiding air pockets. This ensures complete bonding and structural integrity of the anchor.
5. Insert the Threaded Rod or Rebar
Snap on the alignment collar before inserting the threaded rod or rebar. This ensures the rod stays centered for consistent and accurate installation. Insert the rod carefully, twisting slightly if necessary to evenly distribute the resin. Allow the resin to cure fully before applying any load to guarantee a strong and secure anchoring point.
Tips for Best Results：
- Always use a chemical anchoring resin compatible with the sleeve and base material, and discard any unmixed resin.
- For hollow or perforated blocks, make sure the resin fills the cavity completely.
- Follow the resin manufacturer’s curing time to ensure maximum strength.
Why Choose Good Use Nylon Sleeves
- Non-expanding design prevents stress or cracking on the substrate.
- Made from high-strength nylon that is resistant to UV and temperature extremes.
- Compatible with most injection mortars and threaded rods.
- Maximized bonding area enhances load capacity and pull-out strength.
- Easy and clean installation without the need for special tools.
If you have any questions about our nylon sleeves or chemical anchors, please contact our team. We’ll provide detailed information and guidance on selecting the right products for your project.
- Products
Dia. 15mm nylon sleeve for hollow brick and concrete block anchoring
#819 D15x85mm
Good Use Hardware manufactures high-quality D15x85mm nylon sleeves designed to enhance the performance of chemical anchors in hollow bricks and perforated...
Details
Dia. 16mm nylon sleeve for anchoring in perforated bricks and blocks with injection mortar
#819 D16x85mm
Good Use Hardware manufactures high-quality D16x85mm nylon sleeves specifically designed to enhance the performance of chemical anchors in hollow bricks...
Details
Dia. 20mm nylon chemical anchoring sleeves used for securing anchor point with chemical resin
#819 D20x85mm
The D20x85mm nylon sleeve is the largest size in our range, specifically designed for M12-M14 threaded rods and studs. Engineered with a mesh framework,...
Details
Popular Products
Download Nylon sleeve for hollow brick fixing - The Ideal Companion for Chemical Anchors | Sold in 40 Countries Injectable Chemical Anchors Manufacturer Since 1997 | Good Use
Located in Taiwan since 1997, Good Use Hardware Co., Ltd. has been an injectable adhesive mortars and anchors manufacturer. Their main products, including injection cartridges, chemical mortars, chemical anchors, anchor capsules, polyester resins and vinylester resins, which are sold in 40 countries.
Reputable factory of chemical anchor in Taiwan produces the widest range of adhesive anchor solutions for your concrete anchoring applications. with more than 15 years manufacturing experience for Chemical Anchor System, Injection Cartridge System, Construction Chemical Mortar and more. Certified chemical anchor solutions with wide selections of adhesive materials including epoxy anchors, concrete anchors, resin anchors for heavy loads in rebar application, diamond drilled holes and anchoring in solid concrete. Non-drip formula, ideal for overhead installation. Chemical anchor bolt and anchor fixings included for efficient, hassle-free, labor-saving chemical anchoring.
Good Use has been offering customers certified and tested high-quality chemical anchors, both with advanced technology and 25 years of experience, Good Use ensures each customer's demands are met.