Dia. 16mm nylon sleeve for anchoring in perforated bricks and blocks with injection mortar

Dia. 16mm nylon sleeve for anchoring in perforated bricks and blocks with injection mortar - Durable D16 Nylon Sleeve Designed for Fixing M8-M12 Threaded Rods in Hollow Bricks And Blocks. | Sold in 40 Countries Injectable Chemical Anchors Manufacturer Since 1997 | Good Use

Good Use Hardware manufactures high-quality D16x85mm nylon sleeves specifically designed to enhance the performance of chemical anchors in hollow bricks and perforated blocks. When used in combination with chemical anchor, the sleeve forms a solid adhesive plug within the cavity of the brick or block, creating a secure anchoring point for M8-M12 threaded rods and studs. With its net-like structure, the sleeve securely contains both mortar and rods, creating a solid anchoring point in hollow substrates. The alignment collar maintains proper centering of each stud for accurate placement.Once the resin is fully cured, the result is a strong and reliable anchorage that does not rely on expansion forces, thereby reducing the risk of cracking the base material. This makes our nylon sleeves an ideal solution for safe, durable, and long-lasting fixings in hollow or perforated substrates. Installation couldn't be easier: place the nylon sleeve in the drilled hole, fill with injection mortar, insert the stud, and wait for the resin to harden. Good Use Hardware Co., Ltd. is one of prime Dia. 16mm nylon sleeve for anchoring in perforated bricks and blocks with injection mortar - Durable D16 Nylon Sleeve Designed for Fixing M8-M12 Threaded Rods in Hollow Bricks And Blocks. - chemical anchors suppliers based in Taiwan since 1997. Certified chemical anchor solutions with wide selections of adhesive materials including epoxy anchors, concrete anchors, resin anchors for heavy loads in rebar application, diamond drilled holes and anchoring in solid concrete. Non-drip formula, ideal for overhead installation. Chemical anchor bolt and anchor fixings included for efficient, hassle-free, labor-saving chemical anchoring.

#819 D16x85mm

Durable D16 Nylon Sleeve Designed for Fixing M8-M12 Threaded Rods in Hollow Bricks And Blocks.

Once the resin is fully cured, the result is a strong and reliable anchorage that does not rely on expansion forces, thereby reducing the risk of cracking the base material. This makes our nylon sleeves an ideal solution for safe, durable, and long-lasting fixings in hollow or perforated substrates. Installation couldn't be easier: place the nylon sleeve in the drilled hole, fill with injection mortar, insert the stud, and wait for the resin to harden.

Inquire Now

Nylon sleeve for anchoring into hollow substance

When using injection chemical anchors in hollow bricks or blocks, a nylon sleeve is an essential accessory. Made from durable nylon with excellent chemical resistance, the sleeve acts as a plug that is filled with anchor mortar to securely hold the load. Good Use Hardware offers three sizes of nylon sleeves for threaded rods ranging from M8 to M14: D15×85 mm sleeves for M8-M10 rods, D16×85 mm sleeves for M8-M12 rods, and D20×85 mm sleeves for M12-M14 rods.

Specification Of M16x85 Nylon Sleeve

● Item: #819
● Sleeve Size: D16x85mm
● Suitable for M8-M12 threaded rod and studs
● Material: High-strength, durable nylon for long-term stability

D16x85mm nylon sleeves are ideal for edge fastening applications

● Durable Material: Made from corrosion-resistant nylon for long-lasting performance.
● No Expansion Stress: Eliminates expansion forces in brick, preventing damage to hollow substrates.
● Non-Destructive Installation: Designed for safe anchoring without harming the base material.
● Easy Installation: Push-in sleeve design enables faster, cleaner, and hassle-free installation.
● Versatile Applications: Available in three standard sizes to cover common anchoring needs.
● Ideal for Edge Fastenings: Outer radial forces are minimized, making it perfect for edges.
● Reliable Bonding: Provides strong anchorage through bonding and form-fitting between mortar, perforated substrate, anchor rod, and base material.
● Compatible: Works seamlessly with Good Use Hardware chemical anchor adhesives and most standard injection mortars.

Application Of M16x85 Nylon Sleeve

Nylon sleeves are used for chemical fixing in a variety of hollow materials, including honeycomb bricks, perforated sand-lime bricks, hollow blocks, and perforated stones. Their net-like structure securely holds both the mortar and the rods or anchors, providing reliable load-bearing strength within hollow substrates.

How to Install Nylon Sleeves in Hollow Bricks?

To install a nylon sleeve in hollow bricks or blocks, first drill a hole to the specified diameter using an appropriate drill bit. Thoroughly brush and blow out all dust to ensure proper adhesion, then insert the nylon sleeve into the cleaned hole. Dispense the chemical anchor from the bottom of the sleeve, gradually withdrawing the nozzle to prevent excess mortar from accumulating at the base. Finally, insert the threaded rod or stud into the sleeve and allow the assembly to fully cure before applying any load.

#819 D20x85mm

The D20x85mm nylon sleeve is the largest size in our range, specifically designed for M12-M14...

Details

Files Download

Nylon Sleeve Catalogue

Nylon sleeves secure anchors in hollow materials. Good Use offers three sizes, with more applications listed in the catalog.

Download

Gallery

D16 nylon injection sleeve
Chemical resin nylon stud sleeve
Injection anchor sleeve with bolt
Plastic injection resin anchor sleeves for M8-M12 studs
Chemical fixation resin for anchoring in hollow materials

Located in Taiwan since 1997, Good Use Hardware Co., Ltd. has been an injectable adhesive mortars and anchors manufacturer. Their main products, including Dia. 16mm nylon sleeve for anchoring in perforated bricks and blocks with injection mortar, injection cartridges, chemical mortars, chemical anchors, anchor capsules, polyester resins and vinylester resins, which are sold in 40 countries.

Reputable factory of chemical anchor in Taiwan produces the widest range of adhesive anchor solutions for your concrete anchoring applications. with more than 15 years manufacturing experience for Chemical Anchor System, Injection Cartridge System, Construction Chemical Mortar and more. Certified chemical anchor solutions with wide selections of adhesive materials including epoxy anchors, concrete anchors, resin anchors for heavy loads in rebar application, diamond drilled holes and anchoring in solid concrete. Non-drip formula, ideal for overhead installation. Chemical anchor bolt and anchor fixings included for efficient, hassle-free, labor-saving chemical anchoring.

Good Use has been offering customers certified and tested high-quality chemical anchors, both with advanced technology and 25 years of experience, Good Use ensures each customer's demands are met.

Dia. 16mm nylon sleeve for anchoring in perforated bricks and blocks with injection mortar - Durable D16 Nylon Sleeve Designed for Fixing M8-M12 Threaded Rods in Hollow Bricks And Blocks. | Sold in 40 Countries Injectable Chemical Anchors Manufacturer Since 1997 | Good Use

Dia. 16mm nylon sleeve for anchoring in perforated bricks and blocks with injection mortar | Sold in 40 Countries Injectable Chemical Anchors Manufacturer Since 1997 | Good Use

High quality nylon anchor sleeve for M8-M12 threaded rods / An injectable chemical anchor factory has been established in Taiwan, boasting more than 28 years of experience in manufacturing chemical anchor (injection mortar) and exporting to more than 45 countries.