Dia. 15mm nylon mesh sleeve for anchoring in hollow base materials (Gray) - D15 Nylon Anchor Sleeve For Secure Installation of M8-M10 Threaded Rods. | Sold in 40 Countries Injectable Chemical Anchors Manufacturer Since 1997 | Good Use
Good Use Hardware's nylon sleeves are engineered for optimized performance in perforated brick and hollow block applications. These anchor sleeves help retain injection chemical mortar within the cavity, forming a strong anchor point for M8-M10 threaded rods. The net-like structure securely holds both the mortar and the rods or anchors, providing reliable load-bearing strength within hollow materials. The integrated alignment collar ensures that the studs remain precisely centered within the sleeve for accurate and consistent installation.The anchor sleeves are suitable for use in indoor and outdoor environments, offering reliable anchoring without damaging fragile substrates. Their precision-molded structure allows easy installation and consistent results. Available in grey, black, and red, the nylon sleeves are simple to use: insert into the drilled hole, fill with injection mortar, place the stud, and allow the resin to cure. Good Use Hardware Co., Ltd. is one of prime Dia. 15mm nylon mesh sleeve for anchoring in hollow base materials (Gray) - D15 Nylon Anchor Sleeve For Secure Installation of M8-M10 Threaded Rods. - chemical anchors suppliers based in Taiwan since 1997. Certified chemical anchor solutions with wide selections of adhesive materials including epoxy anchors, concrete anchors, resin anchors for heavy loads in rebar application, diamond drilled holes and anchoring in solid concrete. Non-drip formula, ideal for overhead installation. Chemical anchor bolt and anchor fixings included for efficient, hassle-free, labor-saving chemical anchoring.
Dia. 15mm nylon mesh sleeve for anchoring in hollow base materials (Gray)
#819 D15x85mm
D15 Nylon Anchor Sleeve For Secure Installation of M8-M10 Threaded Rods.
Good Use Hardware's nylon sleeves are engineered for optimized performance in perforated brick and hollow block applications. These anchor sleeves help retain injection chemical mortar within the cavity, forming a strong anchor point for M8-M10 threaded rods. The net-like structure securely holds both the mortar and the rods or anchors, providing reliable load-bearing strength within hollow materials. The integrated alignment collar ensures that the studs remain precisely centered within the sleeve for accurate and consistent installation.
The anchor sleeves are suitable for use in indoor and outdoor environments, offering reliable anchoring without damaging fragile substrates. Their precision-molded structure allows easy installation and consistent results. Available in grey, black, and red, the nylon sleeves are simple to use: insert into the drilled hole, fill with injection mortar, place the stud, and allow the resin to cure.
Nylon sleeve for anchoring into hollow substance
When using injection chemical anchors in hollow bricks or blocks, a nylon sleeve is an essential accessory. Made from durable nylon with excellent chemical resistance, the sleeve acts as a plug that is filled with anchor mortar to securely hold the load. Good Use Hardware offers three sizes of nylon sleeves for threaded rods ranging from M8 to M14: D15×85 mm sleeves for M8-M10 rods, D16×85 mm sleeves for M8-M12 rods, and D20×85 mm sleeves for M12-M14 rods.
Specification Of M15x85 Nylon Sleeve
● Item: #819
● Sleeve Size: D15x85mm
● Suitable for M8-M10 threaded rod and studs
● Material: High-strength, durable nylon for long-term stability
D15x85mm nylon sleeves exert no expansion stress in hollow brick
● Durable Material: Made from corrosion-resistant nylon for long-lasting performance.
● No Expansion Stress: Eliminates expansion forces in brick, preventing damage to hollow substrates.
● Non-Destructive Installation: Designed for safe anchoring without harming the base material.
● Easy Installation: Push-in sleeve design enables faster, cleaner, and hassle-free installation.
● Versatile Applications: Available in three standard sizes to cover common anchoring needs.
● Ideal for Edge Fastenings: Outer radial forces are minimized, making it perfect for edges.
● Reliable Bonding: Provides strong anchorage through bonding and form-fitting between mortar, perforated substrate, anchor rod, and base material.
● Compatible: Works seamlessly with Good Use Hardware chemical anchor adhesives and most standard injection mortars.
Application Of M15x85 Nylon Sleeve
Nylon sleeves are used for chemical fixing in a variety of hollow materials, including honeycomb bricks, perforated sand-lime bricks, hollow blocks, and perforated stones. Their net-like structure securely holds both the mortar and the rods or anchors, providing reliable load-bearing strength within hollow substrates.
How to Install Nylon Sleeves in Hollow Bricks?
To install a nylon sleeve in hollow bricks or blocks, first drill a hole to the specified diameter using an appropriate drill bit. Thoroughly brush and blow out all dust to ensure proper adhesion, then insert the nylon sleeve into the cleaned hole. Dispense the chemical anchor from the bottom of the sleeve, gradually withdrawing the nozzle to prevent excess mortar from accumulating at the base. Finally, insert the threaded rod or stud into the sleeve and allow the assembly to fully cure before applying any load.
Why Choose Good Use Nylon Sleeves?
● Manufactured in Taiwan with strict quality control
● Exported to over 45 countries worldwide
● Over 28 years of experience in chemical anchor solutions
● Reliable supply and competitive pricing for global distributors
- Related Products
Dia. 15mm nylon sleeve for hollow brick and concrete block anchoring
#819 D15x85mm
Good Use Hardware manufactures high-quality D15x85mm nylon sleeves designed to enhance the performance...
Details
Dia. 15mm nylon sleeve for chemical anchor in hollow brick or slabs (Black)
#819 D15x85mm
Good Use Hardware offers high-quality D15x85mm nylon anchor sleeves made from real nylon with...
Details
Dia. 15mm nylon sieves with alignment collar for chemical adhesive anchor bolt (Red)
#819 D15x85mm
For demanding anchoring applications in hollow base materials, Good Use Hardware's nylon anchor...
Details
Dia. 16mm nylon sleeve for anchoring in perforated bricks and blocks with injection mortar
#819 D16x85mm
Good Use Hardware manufactures high-quality D16x85mm nylon sleeves specifically designed to enhance...
Details
Dia. 20mm nylon chemical anchoring sleeves used for securing anchor point with chemical resin
#819 D20x85mm
The D20x85mm nylon sleeve is the largest size in our range, specifically designed for M12-M14...
Details- Files Download
Nylon Sleeve Catalogue
Nylon sleeves secure anchors in hollow materials. Good Use offers three sizes, with more applications listed in the catalog.
Download- Gallery
Gray nylon injection sleeve D15
Chemical resin nylon stud sleeve
Injection anchor sleeve with bolt
Plastic injection resin anchor sleeves for M8-M10 studs
Chemical fixation resin for anchoring in hollow materials
Download Popular Products
Dia. 15mm nylon mesh sleeve for anchoring in hollow base materials (Gray) - D15 Nylon Anchor Sleeve For Secure Installation of M8-M10 Threaded Rods. | Sold in 40 Countries Injectable Chemical Anchors Manufacturer Since 1997 | Good Use
Located in Taiwan since 1997, Good Use Hardware Co., Ltd. has been an injectable adhesive mortars and anchors manufacturer. Their main products, including Dia. 15mm nylon mesh sleeve for anchoring in hollow base materials (Gray), injection cartridges, chemical mortars, chemical anchors, anchor capsules, polyester resins and vinylester resins, which are sold in 40 countries.
Reputable factory of chemical anchor in Taiwan produces the widest range of adhesive anchor solutions for your concrete anchoring applications. with more than 15 years manufacturing experience for Chemical Anchor System, Injection Cartridge System, Construction Chemical Mortar and more. Certified chemical anchor solutions with wide selections of adhesive materials including epoxy anchors, concrete anchors, resin anchors for heavy loads in rebar application, diamond drilled holes and anchoring in solid concrete. Non-drip formula, ideal for overhead installation. Chemical anchor bolt and anchor fixings included for efficient, hassle-free, labor-saving chemical anchoring.
Good Use has been offering customers certified and tested high-quality chemical anchors, both with advanced technology and 25 years of experience, Good Use ensures each customer's demands are met.