What is chemical anchor? | Sold in 40 Countries Injectable Chemical Anchors Manufacturer Since 1997 | Good Use

Dual components epoxy injectable cartridge

Dual components epoxy injectable cartridge

What is chemical anchor?

In the fastening industry, it's divided to two filed of fixing, mechanical fixings and chemical fixings. Mechanical fixing is like expansion type anchors which is easy and handy for low-middle strength fixings. For permanent and high strength or critical conditions, chemical anchor resin is more sustainable. There are injection type and capsule type of chemical anchor system. Spin-in chemical capsule or hammer-in are very common for general anchoring. But the strength is less than injection cartridge adhesive anchoring and size is limited.

01 Sep, 2019 Good Use Hardware Co., Ltd.
How Many Type Of Injectable Mortar In The Industry?

Two components will be filled in separated tubes with specific mixing ratio which required used with cartridge gun to squeeze out and mixing. Most chemical mortar manufacturer won't produce empty cartridge by themselves. They out source and purchase but the cost will be higher. Good Use Hardware Co., Ltd owns cartridge injection factory for chemical anchor cartridge, mixer, nylon sleeve. We are capable to design and produce new creations.

The popular volumn are 150ml, 165ml, 280ml, 300ml, 310ml, 360ml, 380ml, 410ml with ratio 10:1 and 390ml, 400ml, 585ml, 600ml with ratio 3:1 or 1:1. Each producer holds the unique formula of chemical anchor resin. Polyester, Epoxy acrylate, vinylester, hybrid mortar and epoxy are most common materials in the market. It depends on consumer preference, performance requirement, installation environment to choose suitale one.

Threaded Rod, Threaded Stud And Rebar Use With Anchoring Adhesive

The strength of anchoring base, stud grade, mortar type and installation technique are key factor for the outcome. If the concrete is not strong enough, it will crack during pull-out testing. This way the mortar strength capability can't be detected. Or rebar break that mean resin strength is higher than anchoring element. There are varied grade of chemical threaded stud and chemical rebar to match project requirement. Mostly high-grade rebar is 5.8 or 8.8. For stronger, threaded studs is with higher grade for any purpose. We tested chemical rebar and threaded rods with all our GU-FIXINGS chemical anchor adhesive in ETA approval lab.

Good Use E-Catalog

Find our full catalog of chemical anchoring range

What is chemical anchor? | Sold in 40 Countries Injectable Chemical Anchors Manufacturer Since 1997 | Good Use

Located in Taiwan since 1997, Good Use Hardware Co., Ltd. has been an injectable adhesive mortars and anchors manufacturer. Their main products, including injection cartridges, chemical mortars, chemical anchors, anchor capsules, polyester resins and vinylester resins, which are sold in 40 countries.

Reputable factory of chemical anchor in Taiwan produces the widest range of adhesive anchor solutions for your concrete anchoring applications. with more than 15 years manufacturing experience for Chemical Anchor System, Injection Cartridge System, Construction Chemical Mortar and more. Certified chemical anchor solutions with wide selections of adhesive materials including epoxy anchors, concrete anchors, resin anchors for heavy loads in rebar application, diamond drilled holes and anchoring in solid concrete. Non-drip formula, ideal for overhead installation. Chemical anchor bolt and anchor fixings included for efficient, hassle-free, labor-saving chemical anchoring.

Good Use has been offering customers certified and tested high-quality chemical anchors, both with advanced technology and 25 years of experience, Good Use ensures each customer's demands are met.