High Temperature Epoxy Anchoring
GU-500 650ml 1:1
Slow Cure Epoxy Resin Chemical Mortar
1:1 ratio 650ml epoxy base injection mortar for anchoring projects in high temperature country.
Use with universal 1:1 dispensing tools.
Two components pure epoxy summer epoxy adhesive is styrene free and low odor to fix machinery, staircases, reinforcement bars, rebars, and threaded rods to concrete, stone, masonry, brick, rock, and other construction fixings. Pure epoxy chemical anchoring system can provide a longer working time and have better flexibility during installation. It can be used indoors or in unventilated areas without health and safety concerns. There is also 600ml available in the range.
Chemical fixing system - Ultimate performance pure epoxy chemical anchor
High-end epoxy mortar for heavy anchoring and critical conditions. In variation case of anchoring work which required higher performance to satisfy and secure the anchoring in dry, wet, uncracked, cracked concrete even in seismic conditions or temperature variation and installation limitation. We tested diverse anchoring condition in ETAG approval lab and with report to compare. Epoxy injectable adhesive anchor is strongest one of bonding fasteners which is growing demands.
Specification of GU-500 Pure epoxy chemical anchor
- Material: Pure Epoxy
- Model Number: GU-500
- Size: 650ml
- Shelf Life: 18 months
- Mixing Ratio: 1:1
- Mixed Color: Gray
- Standard Package: One cartridge with one mixer
- Other Accessory: Mixer, caulking gun, nylon sleeve, air pump, brush
Good Use pure epoxy chemical anchor is ideal for deep embedment and large hole installation
- Heavy duty loading
- Great chemical resistance
- Ideal for deep embedment and diamond drilled holes
- Provide longer working time
- No shrinkage
- More efficient to use bigger cartridge capacity to save time for changing new cartridges
- Styrene free, low odor, and LEED tested for VOC (Volatile Organic Compounds)
- No health or safety concern to slow down your work
All Good Use chemical anchors have done sustained loads test at IWB lab in Germany
There is no qualified lab with equipment for testing bonding anchor according ETA regulations in Asia. All our items are tested by EAD 330499-00-0601 which is comprehensive plan for both of rebar and threaded rods. We cooperate and consult with leading experts in Europe who dedicate in the fasteners field for more than two decades. We keep improving our research capacity and upgrade international approvals of chemical anchor.
Pure epoxy for large projects in construction and building
Excellent strength epoxy material is most requested by large constructions. The demand is growing as more concerns on anchoring secure and human errors. As advanced capability for rod and rebar doweling in concrete, epoxy anchoring is large consumption at building projects. Bigger volume saves more time to change new cartridges and more efficient.
Strongest epoxy anchoring for all fixing solution
Non-drip formula, ideal for overhead installation and suspension anchorage. Versatile and multi-purpose pure epoxy is longer curing time and more flexible on applications. As global warming, climate suitability and wide temperature applicability are important for chemical anchor development. We equip temperature facilities to simulate different anchoring temperature worldwide and do multiple testing to ensure the quality. The steady characteristic of epoxy is most used in tropical zone.
CHART 1. SOLID SUBSTRATE REBAR INSTALLATION DETAILS
|Pressure||Destroy Haul Strength|
|Safety Haul Strength|
|Concrete Strength||4,000 psi||280 kg/cm2||4,000 psi||280 kg/cm2||Hole Diameter||Hole Depth|
|Remarks:||1. Concrete Strength fc': 280kg/cm2 (4,000 psi)|
2. Rebar Strength: #3~#5 fy: 2,800 kgf/cm2, #6~#11 fy= 4,200 kgf/cm2
CHART 2. CURING TIME TABLE
|Temperature (°C)||Gelling||Full Curing|
|5~10||1-2 hr.||90 - 100 hr.|
|10~20||30-60 min.||30 - 60 hr.|
|20~30||14-30 min.||14 - 22 hr.|
|30~40||10-20 min.||6 - 12 hr.|
|Please make pull out test over 24 hours after full cured.|
CHART 3. FIXING CONSUMPTION PER CARTRIDGE
|Anchor Size||Hole Diameter|
|Number of Fixings|
|Note: Based on continuous installation without interruptions or nozzle changes. Provided as a guide and will vary with temperature.|
The secret to extruding 600/650ml cartridge - pull the trigger with a rhythm
600ml/650ml side by side tube is quite big and contains a lot of resin mortar inside. Please pump the resin mortar out from the tube slowly just to allow the resin mortar flowing out from the opening of the tube. Don’t pull the trigger too fast. While pumping too fast, the mortar cannot make it to flow out from the opening of the tube, the pumping pressure will force some mortar coming out from the back plunger or cause the caulking gun stuck. So, in order to have the best performance, please pump the mortar slowly with a rhythm. Don’t pump too fast suddenly. While using electrical cordless caulking gun, also please notice the pumping speed.
- Related Products
GU-500 400ml 3:1
400ml epoxy chemical anchor is 3:1 injectable cartridge for rebar connections and heavy anchoring. Suitable for construction in tropical or summer.Epoxy satisfy the demand for high strength, wide temperature range and nonstandard installation on mostly case. Outstanding tension test by Germany lab according to EAD 330499-00-0601 which is bonded fastener use in concrete with rebar and threaded rod. Epoxy injection mortar can be used indoors or unventilated areas without health and safety concerns. There is also 585ml available in the range.
GU-500SD 400ml 3:1
GU-500SD 400ML is strongest in all chemical anchoring. Remarkable at cold weather, cracked concrete and water saturated holes.Ultimate performance for rebar connections, heavy anchoring on dry concrete, wet concrete, cracked and uncracked concrete. Advanced-formula pure epoxy adhesive is workable at wide temperature and crucial anchoring. Quality tested and approved by Germany lab. Non-sag allows for overhead and suspended ceiling application. There is also 585ml available in the range.
GU-500SD 400ml 3:1
High strength epoxy anchoring for aluminum solar panel concrete mounting system. Top-quality epoxy can sustain under high heat and heavy loading.Ultimate performance for rebar connections, heavy anchoring on dry concrete, wet concrete, cracked and uncracked concrete. Advanced-formula pure epoxy adhesive is workable at wide temperature and crucial anchoring. Quality tested and approved by Germany lab. Non-sag allows for overhead and suspended ceiling application. There is also 585ml available in the range.
Heavy duty caulk gun for dispensing the material. For 1:1 ratio 650ml cartridge. Two component applicator tool. Dispensing epoxies & adhesives for construction joints, crack injection, adhesive installation and bolt setting chemical anchoring, manual applicator for the maximum power demanded by profession.
Heavy caulking gun is features the professional demands. The caulking gun for sealers in 600ml 1:1 or 2:1 side by side cartridges. Smooth and powerful high thrust 26:1 ratio drive. Double gripping plates and steel trigger means increased efficient. Contoured handle for precision and comfort.
The 818 series static mixers are used to automatically mix two part adhesives during application. Can be used for 400ml and 650ml cartridges, designed for mixing ratios 1:1 and 3:1. Mixers are made of high grade polypropylene and disposable.
Cartridge 650ml 1:1 ratio is high quality PP material. Large cartridge design improves static mixing reliability, minimizes waste and increases productivity.
- Files Download
Bonding strength table on dry concrete by different hole sizes and depth. Especially for big diameter rebars/threaded rods.
Technical information of anchor design, curing time, edge distance, consumption per hole and installation procedure for GU-500 pure epoxy.
Pire epoxy pull out strength report for various bolt sizes on 4000psi concrete according to ASTM E488-96 by SGS lab.
Pure epoxy tensile test report of rebar fixing for 25mm hole size by Thailand AIT engineering lab. According to local market demands, our products will test by various qualified lab.
Pure epoxy tensile test report of rebar fixing for 16mm hole size by Thailand AIT engineering lab. According to local market demands, our products will test by various qualified lab.
- Gun Installation Guide
- Are you a manufacturer?
- Can you customize the formula of the chemical anchor (ODM)?
- What is the difference between the chemical anchors?
- What is Styrene?
- What kind of cartridge type do you have and what is the capacity?
- What is the gelling time and full curing time?
- How do you conduct quality control?
- What is the shelf life for chemical anchors? And how to store them?
- How to keep the used chemical anchors if it is not finish?
- How to install the chemical anchor?
- Order & Payment
- Products Information
- Contact Us
High Temperature Epoxy Anchoring | Chemical Anchor Manufacturer - Good Use
Good Use Hardware Co., Ltd. is one of prime High Temperature Epoxy Anchoring | chemical anchors suppliers based in Taiwan since 1997.
Certified chemical anchor solutions with wide selections of adhesive materials including epoxy anchors, concrete anchors, resin anchors for heavy loads in rebar application, diamond drilled holes and anchoring in solid concrete. Non-drip formula, ideal for overhead installation. Chemical anchor bolt and anchor fixings included for efficient, hassle-free, labor-saving chemical anchoring.
Good Use has been offering customers certified tested high-quality chemical anchors. Both with advanced technology and 20 years of experience, Good Use ensures each customer's demands are met.