400ml Ergonomic composite injection epoxy anchoring gun - Dripless Dual-Component Caulking Gun for 400ml 1:1 & 2:1 Cartridges | Sold in 40 Countries Injectable Chemical Anchors Manufacturer Since 1997 | Good Use
The G34-400 is a dripless dual-component manual caulking gun specifically designed for 400ml cartridges with 1:1 and 2:1 mixing ratios, making it ideal for chemical anchor epoxy adhesives and other two-component bonding applications. Constructed with a metal plunger rod and durable plastic plunger, the G34-400 delivers long-lasting performance and reliable durability. Its ergonomic trigger design ensures smooth, precise, and effortless dispensing, allowing professionals to achieve consistent results with minimal waste. This heavy-duty caulking gun is perfect for two-component injection epoxy anchor glue, providing high control and accuracy for demanding construction and structural bonding projects. For 3:1 epoxy cartridges, consider using the G34-400LA dispenser, which is designed for higher viscosity materials and increased thrust. Good Use Hardware Co., Ltd. is one of prime 400ml Ergonomic composite injection epoxy anchoring gun - Dripless Dual-Component Caulking Gun for 400ml 1:1 & 2:1 Cartridges - chemical anchors suppliers based in Taiwan since 1997. Certified chemical anchor solutions with wide selections of adhesive materials including epoxy anchors, concrete anchors, resin anchors for heavy loads in rebar application, diamond drilled holes and anchoring in solid concrete. Non-drip formula, ideal for overhead installation. Chemical anchor bolt and anchor fixings included for efficient, hassle-free, labor-saving chemical anchoring.
400ml Ergonomic composite injection epoxy anchoring gun
G34-400
Dripless Dual-Component Caulking Gun for 400ml 1:1 & 2:1 Cartridges
The G34-400 is a dripless dual-component manual caulking gun specifically designed for 400ml cartridges with 1:1 and 2:1 mixing ratios, making it ideal for chemical anchor epoxy adhesives and other two-component bonding applications. Constructed with a metal plunger rod and durable plastic plunger, the G34-400 delivers long-lasting performance and reliable durability. Its ergonomic trigger design ensures smooth, precise, and effortless dispensing, allowing professionals to achieve consistent results with minimal waste. This heavy-duty caulking gun is perfect for two-component injection epoxy anchor glue, providing high control and accuracy for demanding construction and structural bonding projects. For 3:1 epoxy cartridges, consider using the G34-400LA dispenser, which is designed for higher viscosity materials and increased thrust.
400ml epoxy chemical anchor caulking gun
Epoxy chemical anchor mostly is with bigger volume which required heavy duty caulking gun. The caulking gun quality is crucial when the cartridge size is bigger and in cold weather application that require more energy to squeeze. A good tool is easy to use and non-drip. This type of applicator can be adjusted for ratio 1:1 and 2:1 with purchase of additional spare parts.
Having a manual caulking gun featuring your own logo
We offer various options for customizing your logo on the dispenser. Using a logo sticker is a cost-effective, time-efficient choice with no minimum order requirements and flexible design options. Alternatively, we can print directly on the steel frame, though this option has a minimum order quantity and higher costs. You can include your logo, brand name, or website on the dispenser. Custom colors are also available; please provide a Pantone number for color verification. We will go over all the details based on your needs and provide the best solutions.
Specification Of 400ml Dual Component Cartridge Caulk Gun
● Item No.: G34-400
● For 400ml side by side cartridge adhesive
● Color: Black/Red/Blue
● Cartridge ratio: 1:1 and 2:1
● Thrust Ratio: 18:1
● Handle: Aluminum alloy
● Trigger: Metal
● Carriage: Metal
G34-400 twin tube cartridge gun dispenser is perfect for two component epoxy glue
● Steady quality with competitive price
● Easy installation and operation
● Anti-drip and energy saving design
● Twin gripping plate
● Suitable for high viscosity sealant
● High quality for long-term using
● Press the trigger for short time pause or pulling out the steel arm
Standard Packing of G34-400 epoxy dispenser
● 10pcs per carton
● Carton dimension: 35.5x29x38.5cm(H)
● N.W.:13.4KGS
● G.W.:14.1KGS
How To Use Chemical Anchor Caulking Gun?
1. There is a small trigger on the back of the caulking gun. Press the release trigger with your thumb. This will loosen the long steel rod that runs through the entirety of the frame. 2. Pull the plunger all the way back. 3. Remove the white cap and plug of tube and then screw the mixer nozzle on to the tube. Insert the flat end of the tube into the back of the gun first and put the tube with the mixer nozzle in the front. Pull the handle trigger to move the plungers of caulking gun. Make sure that the plungers of caulking gun are in the center of tube pistons. It is very important to put the tube in the correct position.
Maintenance
Store the caulking gun with the plunger head fully retracted, and clean off the spills or leaks immediately to maximize the life of the gun. Our caulking guns are durable if they are well maintenance.
- Related ProductsFiles DownloadInstallation GuideGallery
400ml Epoxy chemical anchor designed for use in tropical weather conditions
GU-500 400ml 3:1
This 400ml epoxy chemical anchor, in a 3:1 injectable cartridge, is designed for rebar connections...
Details
ETA approved injection epoxy chemical anchor designed for dowel bar retrofitting
GU-500SD 400ml 3:1
GU-500SD pure epoxy chemical anchor has successfully received the European Technical Assessment...
Details
400ml Standard two-component epoxy resin caulking gun
#810
The #810 manual caulking applicator is an economical and reliable dispenser designed for 400ml...
Details
400ml Premium side-by-side cartridge epoxy applicator gun
G34-400LA
The G34-400LA is a heavy-duty 2-component manual dispenser specifically designed for 400ml...
Details
Download Popular Products
400ml Ergonomic composite injection epoxy anchoring gun - Dripless Dual-Component Caulking Gun for 400ml 1:1 & 2:1 Cartridges | Sold in 40 Countries Injectable Chemical Anchors Manufacturer Since 1997 | Good Use
Located in Taiwan since 1997, Good Use Hardware Co., Ltd. has been an injectable adhesive mortars and anchors manufacturer. Their main products, including 400ml Ergonomic composite injection epoxy anchoring gun, injection cartridges, chemical mortars, chemical anchors, anchor capsules, polyester resins and vinylester resins, which are sold in 40 countries.
Reputable factory of chemical anchor in Taiwan produces the widest range of adhesive anchor solutions for your concrete anchoring applications. with more than 15 years manufacturing experience for Chemical Anchor System, Injection Cartridge System, Construction Chemical Mortar and more. Certified chemical anchor solutions with wide selections of adhesive materials including epoxy anchors, concrete anchors, resin anchors for heavy loads in rebar application, diamond drilled holes and anchoring in solid concrete. Non-drip formula, ideal for overhead installation. Chemical anchor bolt and anchor fixings included for efficient, hassle-free, labor-saving chemical anchoring.
Good Use has been offering customers certified and tested high-quality chemical anchors, both with advanced technology and 25 years of experience, Good Use ensures each customer's demands are met.
